AM10EW-4805SH30-NZ

Click on Series name for product info on aimtec.com Series AM10EW-NZ 10 Watt | DC-DC Converter FEATURES: • Efficiency up to 87% • Ultra-Wide 4:1 input range • Continuous Short Circuit Protection • Operating temperature -40oC to + 85oC • 110Vin models design to meet EN50155 • • • • Input Under-voltage Protection Over Voltage, Over Current Protection I/O Isolation 2250 & 3000VDC On/Off remote control Models Single output Model Input Voltage (V) Output Voltage (V) Output Current max (mA) I/O Isolation (VDC) Capacitive load max (μF) Efficiency (%) AM10EW-2403SH30-NZ* 9-36 3.3 2400 3000 5400 78 AM10EW-2405SH30-NZ* 9-36 5 2000 3000 5400 82 AM10EW-2409SH30-NZ* 9-36 9 1111 3000 680 84 AM10EW-2412SH30-NZ* 9-36 12 833 3000 470 84 AM10EW-2415SH30-NZ* 9-36 15 667 3000 330 87 AM10EW-2424SH30-NZ 9-36 24 416 3000 100 86 AM10EW-4803SH30-NZ 18-75 3.3 2400 3000 5400 79 AM10EW-4805SH30-NZ 18-75 5 2000 3000 5400 82 AM10EW-4812SH30-NZ 18-75 12 833 3000 470 86 AM10EW-4815SH30-NZ 18-75 15 667 3000 330 87 AM10EW-4824SH30-NZ 18-75 24 416 3000 100 87 AM10EW-11003SH22-NZ 40-160 3.3 2400 2250 5400 76 AM10EW-11005SH22-NZ 40-160 5 2000 2250 5400 80 AM10EW-11012SH22-NZ 40-160 12 833 2250 470 84 AM10EW-11015SH22-NZ 40-160 15 667 2250 330 84 AM10EW-11024SH22-NZ 40-160 24 417 2250 100 85 * For 110Vin single output models, add suffix “- K” for optional heatsink or “- K-ST” for optional heatsink with screw terminal bottom plate or “-K-STD” for optional heatsink with DIN Rail screw terminal bottom plate. * Add suffix “-ST” for optional screw terminal bottom plate or “-STD” for optional DIN Rail screw terminal bottom plate. * “-ST” and “-STD” options come with reverse polarity protection. 24Vin and 48Vin models with “-ST” or “-STD” option will increase the minimum input voltage and under voltage lockout threshold by 1V and reduce the efficiency by 2%. 110Vin models with “-ST” or “-STD” option will reduce the efficiency by 2% Models Dual output Model Input Voltage (V) Output Voltage (V) Output Current max (mA) I/O Isolation (VDC) Capacitive load max (μF) Efficiency (%) AM10EW-2405DH30-NZ 9-36 ±5 ±1000 3000 ±1000 81 AM10EW-2412DH30-NZ 9-36 ±12 ±416 3000 ±330 85 AM10EW-2415DH30-NZ 9-36 ±15 ±333 3000 ±220 87 AM10EW-4805DH30-NZ 18-75 ±5 ±1000 3000 ±1000 82 AM10EW-4812DH30-NZ 18-75 ±12 ±416 3000 ±330 86 AM10EW-4815DH30-NZ 18-75 ±15 ±333 3000 ±220 87 AM10EW-11005DH22-NZ 40-160 ±5 ±1000 2250 ±1000 80 AM10EW-11012DH22-NZ 40-160 ±12 ±417 2250 ±470 84 AM10EW-11015DH22-NZ 40-160 ±15 ±334 2250 ±330 84 * For 110Vin dual output models, add suffix “- O” for no on/off control option. (ex. AM10EW-11005DH22-NZ-O Has no on/off control and no Ctrl pin.) * For 24Vin dual output, and 48Vin dual output models, add suffix “-ST” for optional screw terminal bottom plate or “-STD” for optional DIN Rail screw terminal bottom plate. * “-ST” and “-STD” options come with reverse polarity protection. 24Vin and 48Vin models with “-ST” or “-STD” option will increase the minimum input voltage and under voltage lockout threshold by 1V and reduce the efficiency by 2%. NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity 110 110 Vin , 25% Load Step Change 300 AM10EW-4803SH30-NZ ±5 110Vin dual output, ±5Vout ±4 110Vin single output, 3.3, 5Vout ±3 Others, 25% Load Step Change ±3 Temperature coefficient Ripple & Noise www.aimtec.com F 051e R12.H REV: 09/23/A 110Vin, 5-100% load, 20Mhz bandwidth Others, 5-100% load, 20Mhz bandwidth Tel: +1 514 620 2722 2 of 10 50 60 Maximum Units ±3 % ±0.5 ±1 ±1 ±1 ±1.5 ±5 160 160 190 210 210 500 ±8 ±8 ±8 ±5 ±0.03 100 120 % % % % of Vo % of Io µs % %/°C mV p-p Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM10EW-NZ 10 Watt | DC-DC Converter General Specifications Parameters Switching frequency Operating temperature Storage temperature Max case temperature Cooling Humidity Solder Temp Leads Case material Weight Dimensions (L x W x H) MTBF Conditions Typical 110 Vin, 100% load Others, 100% load Derating above 71°C 300 350 -40 to +85 -55 to +125 Maximum Units KHz 105 °C °C °C 95 300 % °C Free air convection Non-condensing 1.5 mm from case 10 sec. Plastic (24, 48Vin models) Aluminum Alloy (Others) Pin mountable, 24, 48Vin models 21.2 Pin mountable, 110Vin single output models 26 Pin mountable, 110Vin dual output models 27 -ST option, 24, 48Vin models 46 -ST option, 110Vin models 48 g -STD option, 24, 48Vin models 66 -STD option, 110Vin models 68 -K option, 110Vin single output models 34 -K-ST option, 110Vin single output models 56 -K-STD option, 110Vin single output models 76 24, 48Vin models 2.03 x 1.04 x 0.47inches, 51.50 x 26.50 x 12.00mm 110Vin models 2.00 x 1.00 x 0.46inches, 50.80 x 25.40 x 11.80mm Optional packages See dimensions drawing >1 000 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) Environmental Specifications Parameters Vibration (24 & 48 Vin) Vibration (110 Vin) Test mode 10-55Hz Acceleration 2G, 30min, every axis tested IEC61373 - Category 1, Grade B Safety Specifications Approvals Standards Parameters CE, UL (24 & 48 Vin models only except models marked with *) EN/IEC/UL60950-1 Design to meet EN62368, EN50155 (2250 VDC Isolated models) EN55032, class A (all models) Class B (110Vin models) (110Vin dual output models with recommended EMC circuit 1 or 2) EMI - Conducted and radiated (110Vin single output models with recommended EMC circuit 3 or 4) emission EN50121-3-2 150kHz-500kHz 99dBuV (110Vin models) EN55016-2-1 500kHz-30MHz 93dBuV (110Vin models) EN50121-3-2 30MHz-230MHz 40dBuV/m at 10m (110Vin models) EN55016-2-1 230MHz-1GHz 47dBuV/m at 10m (110Vin models) IEC61000-4-2, Contact ±6KV, Air ±8KV (110Vin models), Electrostatic Discharge Contact ±4KV, Criteria B (24 & 48 Vin models) Immunity EN50121-3-2 Contact ±6KV, Air ±8KV, Criteria B (110Vin models) RF, Electromagnetic Field IEC61000-4-3, 10V/m, Criteria A Immunity EN50121-3-2 20V/m, Criteria A (110Vin models) IEC61000-4-4, ±4KV, Criteria B (110Vin dual output models with recommended EMC circuit 1 or 2) Electrical Fast Transient/Burst (110Vin single output models with recommended EMC circuit 3 or 4) Immunity ±2KV, Criteria B (24 & 48 Vin with the recommended EMC circuit 5) EN50121-3-2 ±2kV, 5/50ns, 5KHz, Criteria A (110Vin models) IEC61000-4-5, L-L ±2KV, Criteria B, (24 & 48 Vin with the recommended EMC circuit 5) L-L ±2KV, L-G ±4KV, Criteria B Surge Immunity (110Vin dual output models with recommended EMC circuit 1) (110Vin single output models with recommended EMC circuit 3) www.aimtec.com F 051e R12.H REV: 09/23/A Tel: +1 514 620 2722 3 of 10 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM10EW-NZ 10 Watt | DC-DC Converter EN50121-3-2 L-L ±1KV (42Ω 0.5μF), L-G ±2KV (42Ω 0.5μF), Criteria B (110Vin models) IEC61000-4-6, 3 Vrms, Criteria A (24 & 48 Vin models) 10 Vrms, Criteria A (110Vin models) EN50121-3-2 0.15MHz-80MHz 10Vr.m.s, Criteria A (110Vin models) RF, Conducted Disturbance Immunity Voltage dips, short interruptions IEC61000-4-29, 0-70%, Criteria B (24 & 48 Vin models) and voltage variations immunity *For 110Vin dual output models, EN50155, EN50121-3-2 and EN55016-2-1 are measured with an input capacitor 100μF/200V or AMFW72-13NZ. *For 110Vin single output models, EN50155, EN50121-3-2 and EN55016-2-1 are measured with an input capacitor 100μF/200V or AMFW72-0.41NZ. Derating Free Air Convection (110Vin single output) Free Air Convection (110Vin Dual Output) Without "-K" heat sink With "-K" heat sink 80 100 Output Power % Output Power % 100 60 40 Safe Operating Area 20 0 80 60 50 40 Safe Operating Area 20 0 -40 -20 0 Ambient 71 75 85 40 80 60 Temperature º C 20 100 -40 -20 0 Ambient 40 71 85 80 60 Temperature º C 20 100 Free Air Convection (24, 48Vin models) Output Power % 100 80 60 40 Safe Operating Area 20 0 -40 -20 0 Ambient www.aimtec.com F 051e R12.H REV: 09/23/A 40 71 85 80 60 Temperature º C 20 Tel: +1 514 620 2722 4 of 10 100 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM10EW-NZ 10 Watt | DC-DC Converter Pin Out Specifications 24 & 48 Vin models 10.16 (0.40) 3 7.62 5.08 (0.30) (0.20) Bottom View 5 10.16 (0.40) 2 1 4.10 (0.16) 12.00 (0.47) 4 20.32 (0.80) 3.09 (0.12) 26.50 (1.04) 10.71 (0.42) 6 15.59 (0.61) DIA 1.00 (0.04) 3.09 (0.12) 51.50 (2.03) 15.59 (0.61) Notes: All dimensions are typical in millimeters (inches). General Tolerance ±0.50 (±0.02) Pin diameter Tolerance ±0.10 (±0.004) Pin Single 1 2 3 4 5 6 On/Off Control -Vin +Vin - Vout No pin + Vout Pin Dual 1 2 3 4 5 6 On/Off Control -Vin +Vin - Vout Common + Vout Pin Single 1 2 3 4 Vin Vin + +Vout -Vout Pin Single 1 2 3 4 Vin Vin + +Vout -Vout 110Vin single output models 20.32 (0.80) 50.80 (2.00) Bottom View 1 25.4 (1.00) 20.32 (0.80) 2 5.08 (0.20) 25.40 (1.00) 3 4 11.80 (0.47) 4.1 (0.16) 50.8 (2.00) Notes: All dimensions are typical in millimeters (inches). General tolerance: ±0.5 (±0.02) Pin diameter tolerance: ±0.1 (±0.004) DIA 1.00 (0.04) 10.16 (0.40) 7.62 5.08 (0.30) (0.20) Bottom View 1 4 15.54 (0.61) 20.32 (0.80) 2.94 (0.12) 4.10 (0.16) 2 10.16 (0.40) 16.50 (0.65) 10.56 (0.42) 3 Side view DIA 1.00 (0.04) 2.94 (0.12) 110Vin single output models with -K option 15.54 (0.61) Notes: All dimensions are typical in millimeters (inches). Pin diameter Tolerance: ±0.10 (±0.004) General Tolerance: ±0.50 (±0.02) www.aimtec.com F 051e R12.H REV: 09/23/A Tel: +1 514 620 2722 5 of 10 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM10EW-NZ 10 Watt | DC-DC Converter 110Vin dual output models 50.80 (2.00) 20.32 (0.80) Pin Single 1 2 3 4 5 6 Ctrl -V Input +V Input +V Output Common -V Output 7.62 (0.60) 5 1 6 25.4 (1.00) Bottom View 2 20.32 (0.80) 3 5.08 (0.20) 25.40 (1.00) 4 50.8 (2.00) 11.80 (0.47) Notes: All dimensions are typical in millimeters (inches). General tolerance ±0.5 (±0.02) Pin diameter tolerance ±0.1 (±0.004) DIA 1.00 (0.04) Dimensions with -ST options Pin Out Specifications 76.00 (2.99) 110Vin models 61.60 (2.43) LED light 2 6 Top view 3 5 23.00 (0.91) 31.50 (1.24) 1 Pin Single 1 2 3 4 5 6 N.C. -Vin +Vin + Vout N.C. - Vout 4 21.20 (0.84) Side view 8.80 (0.35) 24 & 48 Vin models Dimensions: mm (inch) General Tolerance: ±0.50 (0.02) Tightening torque: 0.4N-m max. Wire gauge: 24-12AWG www.aimtec.com F 051e R12.H REV: 09/23/A Tel: +1 514 620 2722 6 of 10 Pin Single Dual 1 2 3 4 5 6 On/Off Control -Vin +Vin + Vout NC - Vout On/Off Control -Vin +Vin + Vout Common - Vout Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM10EW-NZ 10 Watt | DC-DC Converter 110Vin single output models with -K-ST option 76.00 (2.99) 110Vin models 61.60 (2.43) LED light 2 3 23.00 (0.91) 6 Top view 5 N.C. -Vin +Vin + Vout N.C. - Vout 25.30 (1.00) 4 21.20 (0.84) Side view Dimensions: mm (inch) General Tolerance: ±0.50 (0.02) Tightening torque: 0.4N-m max. Wire gauge: 24-12AWG Dimensions with -STD options Pin Out Specifications 110Vin models 76.00 (2.99) 61.60 (2.43) Pin Single Top view 1 2 3 4 5 6 N.C. -Vin +Vin + Vout N.C. - Vout LED light 6 2 3 5 23.00 (0.91) 1 31.50 (1.24) Single 1 2 3 4 5 6 8.80 (0.35) 31.50 (1.24) 1 Pin 4 24 & 48 Vin models 25.80±1.0 (1.02±0.04) Side view 9.80 (0.39) Ø3.30 Ø0.13 Pin Single Dual 1 2 3 4 5 6 On/Off Control -Vin +Vin + Vout NC - Vout On/Off Control -Vin +Vin + Vout Common - Vout Dimensions: mm (inch) General tolerance: ±0.50 (0.02) Tightening torque: 0.4N-m max. Wire gauge: 24-12AWG DIN rail: TS35 www.aimtec.com F 051e R12.H REV: 09/23/A Tel: +1 514 620 2722 7 of 10 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM10EW-NZ 10 Watt | DC-DC Converter 110Vin single output models with -K-STD option 76.00 (2.99) 61.60 (2.43) 110Vin models LED light 6 Top view 2 23.00 (0.91) 31.50 (1.24) 1 5 3 Pin Single 1 2 3 4 5 6 N.C. -Vin +Vin + Vout N.C. - Vout 4 9.80 (0.39) Ø3.30 Ø0.13 25.80 (1.02) 29.90 (1.18) Side view Dimensions: mm (inch) General Tolerance: ±0.50 (0.02) Tightening torque: 0.4N-m max. Wire gauge: 24-12AWG DIN rail: TS35 Recommended EMC circuit 1 (110Vin dual output models) CY2 1000pF/ 400VAC FUSE + Vin + Vin + Vout +Vout 100μF + 100μF/ AMFW72-13NZ 0.22μF/ 250V 200V DC DC - Vin Common 100μF PE CY1 1000pF/ 400VAC - Vin - Vout -Vout Recommended EMC circuit 2 (110Vin dual output models) For EMS test For EMI test LCM 2.2mH Or AMFC22-1NZ + Vin 0.47μF/ + CY2 1000pF/ 400VAC CY4 1000pF/ 400VAC 0.22μF/ 250V 250V 200V 330μF/ 200V + Vout +Vout 100μF DC DC Common 100μF - Vin PE + 100μF/ + Vin A CY3 1000pF/ 400VAC CY1 1000pF/ 400VAC - Vin - Vout -Vout B Notes:Part A for EMI filtering and Part B is used for EMS filtering. www.aimtec.com F 051e R12.H REV: 09/23/A Tel: +1 514 620 2722 8 of 10 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM10EW-NZ 10 Watt | DC-DC Converter Recommended EMC circuit 3 (110Vin single output models) CY2 1000pF/ 400VAC FUSE + Vin + 100μF/ AMFW72-0.41NZ - Vin DC 10 - 47μF 200V PE DC - Vin CY1 1000pF/ 400VAC +Vout + Vout + Vin Cout - Vout Vout Cout 3.3 / 5 12 / 15 24 100µF 47µF 22µF -Vout Recommended EMC circuit 4 (110Vin single output models) For EMS test For EMI test LCM 2.2mH Or AMFC22-1NZ + Vin CY4 1000pF/ 400VAC 0.22μF/ 0.22μF/ 250V 250V + CY2 1000pF/ 400VAC LCM 1.1mH - Vin PE DC 10 - 47µF 100μF/ 200V CY3 1000pF/ 400VAC A + Vout + Vin DC - Vin CY1 1000pF/ 400VAC +Vout Cout - Vout -Vout B Notes:Part A for EMI filtering and Part B is used for EMS filtering. Recommended EMC circuit 5 24 & 48 Vin single output models CY1 1nF/3KV F1 LCM +Vin +Vo MOV C1 C3 C2 C4 10µF DC-DC Converter -Vo -Vin B A CY2 1nF/3KV Notes:Part A for EMI filtering and Part B is used for EMS filtering. Vin MOV C1 C2 C3 C4 LCM 24V 48V S20K30 S14K60 680 µF / 50V 680 µF / 100V 1 µF / 50V 1 µF / 100V 330 µF / 50V 330 µF / 100V 4.7 µF / 50V 4.7 µF / 100V 4.7mH or AMFC47-3NZ 6.8mH www.aimtec.com F 051e R12.H REV: 09/23/A Tel: +1 514 620 2722 9 of 10 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM10EW-NZ 10 Watt | DC-DC Converter 24 & 48 Vin dual output models CY1 1nF/3KV F1 +Vin MOV +Vo LCM C1 C3 C2 10µF C4 Com DC-DC Converter 10µF -Vin -Vo A B CY2 1nF/3KV Notes:Part A for EMI filtering and Part B is used for EMS filtering. Vin MOV C1 C2 C3 C4 LCM 24V 48V S20K30 S14K60 680 µF / 50V 680 µF / 100V 1 µF / 50V 1 µF / 100V 330 µF / 50V 330 µF / 100V 4.7 µF / 50V 4.7 µF / 100V 4.7mH or AMFC47-3NZ 4.7mH or AMFC47-3NZ NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity