AM10GH-2403NZ

AM10GH-NZ DC-DC Converter Click to ORDER AM10GH-NZ samples Aimtec adds the AM10GH-NZ 10W series to its SIP8 DC/DC converters family. This new series now increases the power density of our SIP8 line from 9W to 10W. The AM10GH-NZ series provide a 4:1 ultrawide input voltage range and comes standard with single regulated output voltages of 3.3, 5, 9, 12, 15 and 24VDC with an I/O isolation of 1500VDC. Thanks to its wide -40°C to +85°C operating temperature range, the AM10GH-NZ is suitable for applications that include industrial control, grid power, instrumentation and telecommunication. In addition to meeting EN62368 certification, protections for input under-voltage, output short circuit, over-current are also included, increasing the overall safety of your new system design. SIP8 Features • • • • • • Summary Ultra-wide input voltage range: 9-36VDC Operating temperature range: -40℃ to +85℃ Efficiency high up to 86% Input under-voltage protection, output short circuit, over-current protection High power density, SIP8 package International standard pin-out AM10GH-NZ 1500 48 6000 200 125 24 3.3 9 85 1500 36 -24 Input voltage Output (VDC) voltage (V) 10 Isolation (VDC) 60 40 1000 0.25 105 -40 Power (W) Temp. range Derating (°C) (°C) Applications Training Press Release Coming Soon! Power Grid Product Training Video (click to open) F 052e R1 Rev: 06/22/A Industrial Telecom Instrumentation Application Notes www.Aimtec.com 1 AM10GH-NZ DC-DC Converter Models & Specifications Single Output Model Input Voltage (VDC) Output Voltage (VDC) AM10GH-2403NZ AM10GH-2405NZ AM10GH-2409NZ AM10GH-2412NZ AM10GH-2415NZ AM10GH-2424NZ 24 (9 - 36) 24 (9 - 36) 24 (9 - 36) 24 (9 - 36) 24 (9 - 36) 24 (9 - 36) 3.3 5 9 12 15 24 Output Input Current Current max max (mA) (A) 398 485 485 485 485 485 2.40 2.00 1.11 0.83 0.67 0.42 Isolation (VDC) Maximum capacitive Load (µF) Efficiency Full Load (Min.) (%) 1500 1500 1500 1500 1500 1500 2200 2200 680 470 330 220 82 85 86 86 86 85 Input Specification Parameters Voltage range Filter Input under-voltage lockout Absolute maximum rating Input reflected ripple current Conditions Typical Maximum Units Nominal 24V 9 – 36 VDC Capacitance Filter 6.5 VDC 1 Sec. ≥ -0.7 50 VDC 50 mA pk-pk ON – 3.5 to 12Vdc or open On/Off Control OFF – 0 to 1.2Vdc or connected to “-V Input” , idle current 10mA max. Note: The voltage of Ctrl pin is relative to “-V Input” pin . Isolation Specification Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60 sec, < 1mA 500Vdc Input to output , 100KHz/0.1V 1500 >1000 1000 Conditions Typical Maximum Units VDC MOhm pF Output Specification Parameters Voltage accuracy Line regulation Load regulation Short circuit protection Over current protection Temperature coefficient Ripple & Noise* Transient recovery time 5-100% load Full load, main input range 5-100% load ±1.5 ±0.25 ±0.5 Continuous, Auto recovery 160 Maximum Units ±2.0 ±0.5 ±1.0 % % % 230 % of Iout Full load ±0.03 %/°C 20MHz bandwidth, 5-100% load 75 150 mV pk-pk 25% load step change 300 500 µS 25% load step change, 3.3/5V Output ±5 ±8 % Transient response deviation 25% load step change, Others ±3 ±5 % * Ripple & noise under 0-5% load is 300mV max. Please refer to the ripple & noise reduction circuit for testing method. F 052e R1 Rev: 06/22/A www.Aimtec.com 2 AM10GH-NZ DC-DC Converter General Specifications Parameters Conditions Typical Maximum Units Switching frequency* 100% load 500 KHz Operating temperature See derating graph -40 to +85 °C Storage temperature -55 to +125 °C Maximum case temperature 95 °C Lead temperature 1.5mm from case 10 sec. 300 °C Cooling Free air convection Humidity Non-condensing 95 % RH Case material Heat resistant black Plastic (flammability to UL 94V-0) Weight 5.5 g Dimensions (L x W x H) 0.87 x 0.37 x 0.47 inches, 22.00 x 9.50 x 12.00mm MTBF > 1 000 000 hrs (MIL-HDBK -217F, t=+25°C) / Full Load *Switching frequency reduces when load under 50%. All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity