AM10GH-2405NZ

AM10GH-NZ DC-DC Converter Click to ORDER AM10GH-NZ samples Aimtec adds the AM10GH-NZ 10W series to its SIP8 DC/DC converters family. This new series now increases the power density of our SIP8 line from 9W to 10W. The AM10GH-NZ series provide a 4:1 ultrawide input voltage range and comes standard with single regulated output voltages of 3.3, 5, 9, 12, 15 and 24VDC with an I/O isolation of 1500VDC. Thanks to its wide -40°C to +85°C operating temperature range, the AM10GH-NZ is suitable for applications that include industrial control, grid power, instrumentation and telecommunication. In addition to meeting EN62368 certification, protections for input under-voltage, output short circuit, over-current are also included, increasing the overall safety of your new system design. SIP8 Features • • • • • • Summary Ultra-wide input voltage range: 9-36VDC Operating temperature range: -40℃ to +85℃ Efficiency high up to 86% Input under-voltage protection, output short circuit, over-current protection High power density, SIP8 package International standard pin-out AM10GH-NZ 1500 48 6000 200 125 24 3.3 9 85 1500 36 -24 Input voltage Output (VDC) voltage (V) 10 Isolation (VDC) 60 40 1000 0.25 105 -40 Power (W) Temp. range Derating (°C) (°C) Applications Training Press Release Coming Soon! Power Grid Product Training Video (click to open) F 052e R1 REV: 08/21/A Industrial Telecom Instrumentation Application Notes www.Aimtec.com 1 AM10GH-NZ DC-DC Converter Models & Specifications Single Output Model Input Voltage (VDC) Output Voltage (VDC) AM10GH-2403NZ AM10GH-2405NZ AM10GH-2409NZ AM10GH-2412NZ AM10GH-2415NZ AM10GH-2424NZ 24 (9 - 36) 24 (9 - 36) 24 (9 - 36) 24 (9 - 36) 24 (9 - 36) 24 (9 - 36) 3.3 5 9 12 15 24 Output Input Current Current max max (mA) (A) 398 485 485 485 485 485 2.40 2.00 1.11 0.83 0.67 0.42 Isolation (VDC) Maximum capacitive Load (µF) 1500 1500 1500 1500 1500 1500 2200 2200 680 470 330 220 Efficiency (Min.) (%) 83 86 86 86 86 86 Input Specification Parameters Voltage range Filter Input under-voltage lockout Absolute maximum rating Input reflected ripple current Conditions Nominal 24V Typical Maximum 9 – 36 Capacitance Filter 6.5 Units VDC 1 Sec. 50 50 ON – 3.5 to 12Vdc or open On/Off Control OFF – 0 to 1.2Vdc or connected to “-V Input” , idle current 10mA max. Note: The voltage of Ctrl pin is relative to “-V Input” pin . VDC VDC mA pk-pk Isolation Specification Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60 sec, < 1mA 500Vdc Input to output , 100KHz/0.1V 1500 >1000 1000 Conditions Typical Maximum Units VDC MOhm pF Output Specification Parameters Voltage accuracy Line regulation Load regulation Short circuit protection Over current protection Temperature coefficient Ripple & Noise* Transient recovery time Transient response deviation F 052e R1 REV: 08/21/A 5-100% load Full load, main input range 5-100% load Continuous, Auto recovery 160 Full load 3.3V,5V Output 20MHz bandwidth 5-100% load Others 25% load step change 25% load step change 3.3V,5V Output www.Aimtec.com 60 75 Maximum Units ±2.0 ±0.5 ±1.0 % % % 230 ±0.03 120 150 500 ±8 % of Iout %/ oC mV pk-pk µS % 2 AM10GH-NZ DC-DC Converter Others ±5 * 20MHz bandwidth General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Lead temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Conditions Typical 100% load See derating graph 500 -40 to +85 -55 to +125 1.5mm from case 10 sec. Maximum Units 95 300 KHz o C o C o C o C Free air convection Non-condensing 95 Heat resistant black Plastic (flammability to UL 94V-0) 5.5 0.87 x 0.37 x 0.47 inches, 22.00 x 9.50 x 12.00mm > 1 000 000 hrs (MIL-HDBK -217F, t=+25oC) / Full Load % RH g All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity