AM10SBO-4824SNZ

AM10SBO-NZ DC-DC Converter Preliminary Click to ORDER AM10SBO-NZ samples The AM10SBO-NZ series is a high-performance open frame 1/16 brick DC/DC converter specifically designed for a variety of telecom applications. It features 10W of output power with no requirement for minimum load, a wide input voltage range of 36-75VDC, operating temperature up to 85°C and tested I/O isolation of 1500VDC. Additionally, this series includes input under-voltage protection, output short-circuit, over-voltage, over-current protection, and remote On/Off control. The AM10SBO-NZ meets EN 62368 standards and are widely used in the industrial control, electric power instrumentation and communication. Open frame 1/16 brick Features • • • • • Summary High I/O Isolation 1500VDC Input under voltage protection, output over current, over voltage, and short circuit protection Operating Temp: -40 °C to +85 °C Compact open frame design and high-power density Efficiency up to 88% AM10SBO-NZ 1500 48 6000 100 125 85 24 125 71 75 36 1500 5 1000 3.3 3 10 0.25 Input voltage Output voltage (VDC) (V) Isolation (VDC) Power (W) -40 -40 Temp. range (°C) Derating (°C) Applications Training Press Release Coming Soon! IoT Product Training Video (click to open) F 052e R4 Industrial Telecom Portable Equipment Application Notes www.Aimtec.com 1 AM10SBO-NZ DC-DC Converter Preliminary Models & Specifications Single Output Model AM10SBO-4805SNZ AM10SBO-4812SNZ AM10SBO-4815SNZ AM10SBO-4824SNZ Input Voltage (VDC) Output Voltage (VDC) Maximum Output Current (A) Maximum capacitive Load (µF) Efficiency Typ. (%) 48 (36-75) 48 (36-75) 48 (36-75) 48 (36-75) 5 12 15 24 2 0.833 0.667 0.417 2200 470 330 100 83 87 88 88 Input Specification Parameters Input current Filter Absolute maximum rating Input reflected ripple current Start-up voltage Start-up time UVLO On/Off control Conditions Nominal input voltage, full load /no load Capacitor filter Maximum duration 1s Typical Maximum Units 252/4 258/8 mA >0.7 50 100 VDC mA VDC ms VDC 36 100 29 On Off Idle current Control pin open or 3.5-12VDC Control pin short to –Vin or 0-1.2VDC 6 10 mA Isolation Specification Parameters Tested I/O voltage Resistance Capacitance Conditions Typical Maximum Units 60 sec, leakage ≤ 1mA 500VDC 100kHz/0.1V >1500 >1000 1000 Conditions Typical Maximum Units 5-100% load LL-HL 5-100% load 0-100% load ±1 ±0.2 ±0.5 ±3 ±0.5 ±1 ±3 ±0.03 120 5 500 ±8 ±5 % % % % %/°C mV pk-pk % of Vo µs % % VDC MΩ pF Output Specification Parameters Voltage accuracy Line regulation Load regulation Temperature coefficient Nominal input voltage, 5-100% load 100 Nominal input voltage, 0-5% load Transient Recovery Time 25% load step change 300 25% load step change, 5V output ±5 Transient Response Deviation 25% load step change, others ±3 * Ripple and Noise are measured at 20MHz bandwidth. Please refer to the application note for specific details. Ripple & Noise* F 052e R4 www.Aimtec.com 2 AM10SBO-NZ DC-DC Converter Preliminary General Specifications Parameters Conditions Typical Maximum Units Switching frequency* 300 KHz Short circuit protection Continuous, auto recovery Over current protection ≥ 110 190 % of Io Over voltage protection ≥ 110 160 % of Vo Operating temperature With derating -40 to +85 °C Storage temperature -55 to +125 °C Cooling Free air convection or forced air convection Humidity Non-condensing >5 95 % RH Weight 5.84 g Dimensions (L x W x H) 1.3 x 0.9 x 0.45 inches (33.02 x 22.86 x 11.4 mm) MTBF 1 000 000 hrs (MIL-HDBK -217F, t=+25°C) / Full Load * Switching frequency reduced when load < 50%. NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity