AM10T-4824SNZ

Click on Series name for product info on aimtec.com Series AM10T-NZ 10 Watt | DC-DC Converter FEATURES: • • • • • Models Single output Model • • • • • Short Circuit, OC & OVP Protection DIP 24 Package output short circuit protection Wide 2:1 input range Meets EN55032 Class A without external circuit Operating temperature -40oC to + 85o Input under-voltage protection over-current, over-voltage protection Low ripple and noise Input/output Isolation voltage 1500VDC Input Voltage (V) Output Voltage (V) Output Current max (mA) Capacitive Load, max(uf) Efficiency (%) 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 36-75 3.3 5 12 15 24 3.3 5 12 15 24 3.3 5 12 15 24 2400 2000 833 667 416 2400 2000 833 667 416 2400 2000 833 667 416 1200 1000 470 330 100 1200 1000 470 330 100 1200 1000 470 330 100 87 87 87 87 88 87 88 87 87 88 87 88 87 87 88 Input Voltage (V) Output Voltage (V) Output Current max (mA) Capacitive Load, max(uf) Efficiency (%) AM10T-1203SNZ AM10T-1205SNZ AM10T-1212SNZ AM10T-1215SNZ AM10T-1224SNZ AM10T-2403SNZ AM10T-2405SNZ AM10T-2412SNZ AM10T-2415SNZ AM10T-2424SNZ AM10T-4803SNZ AM10T-4805SNZ AM10T-4812SNZ AM10T-4815SNZ AM10T-4824SNZ Dual output Model AM10T-1205DNZ 9-18 ±5 ±1000 1000 83 AM10T-1212DNZ 9-18 ±12 ±416 470 87 AM10T-1215DNZ 9-18 ±15 ±333 330 86 AM10T-2405DNZ 18-36 ±5 ±1000 1000 83 AM10T-2412DNZ 18-36 ±12 ±416 470 87 AM10T-2415DNZ 18-36 ±15 ±333 330 87 AM10T-4805DNZ 36-75 ±5 ±1000 1000 83 AM10T-4812DNZ 36-75 ±12 ±416 470 87 AM10T-4815DNZ 36-75 ±15 ±333 330 87 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity 1000 2000 Output Specifications Parameters Voltage accuracy Short Circuit protection Short Circuit restart Over voltage protection Line voltage regulation LL-HL Load voltage regulation Temperature coefficient Transient recovery time Transient recovery deviation Ripple & Noise Over Current Protection Conditions Typical Positive Output Negative Output ±0.5 ±1 Maximum Units % Continuous Auto recovery Zener diode clamp Positive Output Negative Output 5% – 100% full load 0% – 5% load Full load 25% load step change, 25% load step change >110% ±0.2 ±0.5 ±0.5 ±5 ±0.03 0.3 3.3 and 5V output: ±5 Others: ±3 20Mhz bandwidth, 5%100% load 3.3 and 5V Outputs Other 160 140 Conditions Typical VDC % 0.5 3.3 and 5V output: ±8 Others: ±5 40 % % %/oC mS % mV p-p 230 190 %Io General Specifications Parameters Maximum Units Switching frequency 100% load 350 KHz oC Operating temperature Derating above +71 oC -40 to +85 oC Storage temperature -55 to +125 Cooling Free air convection Humidity 95 % Case material Aluminum Alloy Weight 14 g Dimensions (L x W x H) Tolerance ±0.02 inch, ±0.5mm 1.26 x 0.78 x 0.42 inches 32.00 x 20.00 x 10.80 mm MTBF 1000 K hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity