AM10TWM-2412DH50YZ

AM10TWM-YZ DC-DC Converter Click to ORDER AM10TWM-YZ samples Aimtec launched the AM10TWM-YZ, a 10W medical grade DC/DC converterinaDIP24 case to satisfy the rigorous power demands of medical equipment. This series meets EN60601-1-2:2015 medical safety standard and has ahigh I/O isolation of 5000VAC with reinforced insulation rated for a 250VAC working voltage and 2xMOPP. This 10W converter has 4:1 input (9-36V & 18-75V), single & dual outputs (3.3...15V, =/-5...+/-15V). In terms of safety, this series has output short circuit, overvoltage & overcurrent protections. Our medical can be used in applications such as medical assisting devices, computed tomography, ultrasound machinery and other medical ancillary equipment. Encapsulated Summary Features • • • • • • 4:1Wide input voltage High efficiency to 85% Operating temperature: -40°Cto+90°C Meet medical EMC standard of EMI EN 55011, Class A Meet medical EMC standard of EMS EN 606011-2:2015 I/O Isolation of 5000VAC with reinforced insulation rated for 250VAC and 2xMOPP AM10TWM-YZ 1500 6000 48 5000 105 200 125 90 75 15 9 3.3 1000 30 10 3.3 60 0.25 -40 -50 -24 Input voltage Output voltage Isolation (VAC) (VAC) (V) Power (W) Temp. range (℃) Derating (℃) Applications Training Press Release Coming Soon! Medical Product Training Video (click to open) F 052e R4 Rev: 09/23/A Industrial Application Notes www.Aimtec.com 1 AM10TWM-YZ DC-DC Converter Models & Specifications Single Output Model AM10TWM-2403SH50YZ AM10TWM-2405SH50YZ AM10TWM-2412SH50YZ AM10TWM-2415SH50YZ AM10TWM-4803SH50YZ AM10TWM-4805SH50YZ AM10TWM-4812SH50YZ AM10TWM-4815SH50YZ Input Voltage (VDC) Output Voltage (VDC) Input Current max (mA) Output Current max (A) Isolation (VAC) Maximum capacitive Load (µF) Efficiency (%) 24 (9 - 36) 24 (9 - 36) 24 (9 - 36) 24 (9 - 36) 48 (18 - 75) 48 (18 - 75) 48 (18 - 75) 48 (18 - 75) 3.3 5 12 15 3.3 5 12 15 414 496 496 499 207 248 248 249 2.5 2 0.833 0.67 2.5 2 0.833 0.67 5000 5000 5000 5000 5000 5000 5000 5000 4700 2500 430 270 4700 2500 430 270 83 84 84 84 83 84 84 84 Input Voltage (VDC) Output Voltage (VDC) Input Current max (mA) Output Current max (A) Isolation (VAC) Maximum capacitive Load (µF) Efficiency (%) 24 (9 - 36) 24 (9 - 36) 24 (9 - 36) 48 (18 - 75) 48 (18 - 75) 48 (18 - 75) ±5 ±12 ±15 ±5 ±12 ±15 496 494 500 248 247 250 ±1.0 ±0.42 ±0.34 ±1.0 ±0.42 ±0.34 5000 5000 5000 5000 5000 5000 ±1250 ±220 ±135 ±1250 ±220 ±135 84 85 85 84 85 85 Dual Output Model AM10TWM-2405DH50YZ AM10TWM-2412DH50YZ AM10TWM-2415DH50YZ AM10TWM-4805DH50YZ AM10TWM-4812DH50YZ AM10TWM-4815DH50YZ Input Specification Parameters Voltage range Filter Startup time Absolute maximum rating Input reflected ripple current On/Off Control F 052e R4 Rev: 09/23/A Conditions Nominal 24V Nominal 48V Typical 9 – 36 18 - 75 Pi network 0.015 Maximum Nominal input and resistive load 24V models, 100mS 50 48V models, 100mS 100 5 to 20MHz, 12μH source impedance 35 ON – 0 to 1.2Vdc or open; OFF – 2.2 to 12Vdc, idle current 4mA typ. www.Aimtec.com Units VDC S VDC mA pk-pk 2 AM10TWM-YZ DC-DC Converter Isolation Specification Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60 sec 500Vdc 5000 >1000 20 Conditions Typical Maximum Units VAC MOhm pF Output Specification Parameters Voltage accuracy Cross regulation (Dual) Line regulation Load regulation Voltage adjustment Short circuit protection Over current protection Over voltage protection Temperature coefficient Ripple & Noise* Transient recovery time Transient response deviation * 20MHz bandwidth 25% to 100% load on one output, 100% load on second output Full load, main input range 0-100% load 20MHz bandwidth 25% load step change 25% load step change Continuous, Auto recovery 150 Zener clamped ±0.02 Maximum Units ±2 % ±5 % ±0.5 ±0.5 ±10 % % %Vout % of Iout ±3 100 350 ±5 %/ oC mV pk-pk µS % Typical Maximum Units General Specifications Parameters Conditions Switching frequency 100% load 300 KHz o Operating temperature See derating graph -40 to +90 C o Storage temperature -55 to +125 C o Maximum case temperature 95 C o Lead temperature 1.5mm from case 10 sec. 260 C Cooling Free air convection Humidity Non-condensing 95 % RH Case material Heat resistant black Plastic (flammability to UL 94V-0) Weight 15.5 g Dimensions (L x W x H) 1.24 x 0.79 x 0.39 inches, 31.60 x 20.10 x 10.00mm MTBF > 900 000 hrs (MIL-HDBK -217F, t=+25oC)/Full Load All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity