AM15CW-2405SZ

Click on Series name for product info on aimtec.com Series AM15CW-Z 15Watt | DC-DC Converter FEATURES: • Ultra-compact footprint 1”x1” • Ultra-wide Input Range 4:1 • 1600 VDC Isolation • Remote ON/OFF Function • No Minimum Load Required • • • • • Adjustable Output Voltage Operating Temperature -40ºC to +85ºC Over Current and Over Voltage Protection Efficiency up to 89% RoHS Compliant Models Single output Model Input Voltage (V) Output Voltage (V) Output Current max (A) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 3.3 5 12 15 3.3 5 12 15 4 3 1.3 1 4 3 1.3 1 1600 1600 1600 1600 1600 1600 1600 1600 1000 1000 330 220 1000 1000 330 220 86 87 88 89 84 86 87 88 Input Voltage (V) Output Voltage (V) Output Current max (A) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) AM15CW-2403SZ AM15CW-2405SZ AM15CW-2412SZ AM15CW-2415SZ AM15CW-4803SZ AM15CW-4805SZ AM15CW-4812SZ AM15CW-4815SZ Models Dual output Model AM15CW-2405DZ 9-36 ±5 ±1.5 1600 ±470 85 AM15CW-2412DZ 9-36 ±12 ±0.625 1600 ±220 88 AM15CW-2415DZ 9-36 ±15 ±0.5 1600 ±100 89 AM15CW-4805DZ 18-75 ±5 ±1.5 1600 ±470 84 AM15CW-4812DZ 18-75 ±12 ±0.625 1600 ±220 87 AM15CW-4815DZ 18-75 ±15 ±0.5 1600 ±100 88 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity1000 1200 Output Specifications Parameters Conditions Voltage accuracy Cross Regulation* Over voltage protection Over current protection Short Circuit protection Short circuit restart Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Ripple & Noise** Voltage adjustment range Typical Dual Output Models Zener Diode Clamp Full Load 120 170 Continuous Auto-Recovery HL-LL HL-LL, balanced load 0% to 100% load 0% to 100% balanced load ±0.02 20MHz Bandwidth Trim - Single output models only * One of the outputs is at 100% load while the other output is at 25% to 100% load. ** Measured at 20MHz bandwidth with a 1uF ceramic capacitor and a 10μF tantalum capacitor. General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Derating Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Transient recovery time Transient recovery deviation Conditions Typical 100% load With derating above +66°C 375 -40 to +85 -55 to +125 105 66 to 85°C 2.6 Free air convection (30-65LFM) 95 KHz °C °C °C %/ °C % RH Nickel-coated copper 18.1 1.00 x 1.00 x 0.41 inches 25.40 x 25.40 x 10.40 mm > 560,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25°C) 1.5mm from case for 10 sec Load step change 75% to 50% to 25% Load step change 75% to 50% to 25% 260 250 ±3 g °C µS % Safety Specifications Parameters Agency Approvals Standards www.aimtec.com F 051e R11.G Rev: 04/21/A CE, UL UL 60950-1, UL62368-1 EN 55032 Class A with the recommended EMC circuit EN 61000-4-2 Perf. Criteria A EN 61000-4-3 Perf. Criteria A EN 61000-4-4 Perf. Criteria A (external 220uF/100V cap required) EN 61000-4-5 Perf. Criteria A (external 220uF/100V cap required) EN 61000-4-6 Perf. Criteria A EN 61000-4-8 Perf. Criteria A Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15CW-Z 15Watt | DC-DC Converter Pin Out Specifications Single + V input - V input On/Off Control + V output Trim - V output Pin 1 2 3 4 5 6 Dual + V input - V input On/Off Control + V output Common - V output Dimensions Bottom View 2.54 (0.10) Top View 25.40 (1.00) 10.16 2.54 (0.40) (0.10) 10.16 (0.40) 4 5 6 4 - Stand-off 15.24 (0.60) 20.32 (0.80) 25.40 (1.00) +V Output Trim -V Output -V +V Input Input 2.54 (0.10) 1 10.40 (0.41) 6.00 (0.24) Printed Face 2.54 (0.10) 1.00 (0.39) Stand-off 0.5 (0.02) Side View 3 2 10.16 (0.40) CTRL 7.62 (0.30) 5.08 (0.20) All dimensions are typical in millimeters (inches) Pin Diameter: 1.00 ± 0.05 (0.04 ± 0.002) Pin Pitch And Length Tolerance: ± 0.35 (±0.014) Case Tolerance: ± 0.5 (±0.02) Stand-off tolerance: ± 0.1 (±0.004) Derating Trimming Free Air Convection 66º C Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C www.aimtec.com F 051e R11.G Rev: 04/21/A Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15CW-Z 15Watt | DC-DC Converter Test Circuits Note: 1. Input filter (C1, C2, L) are needed to meet conducted emission (EN 55022 Class A) and should be mounted as close as possible to the converter. L 12uH +V input +V output + C1 2.2uF/100V C2 2.2uF/100V DC/DC Converter - V input Load -V output NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity