AM15E-2405SZ

Click on Series name for product info on aimtec.com Series AM15E-Z 15 Watt | DC-DC Converter FEATURES: • • • • • RoHS compliant Full SMD internal technology Wide 2:1 input range High efficiency up to 88% Pin compatible with multiple manufacturers • • • • Operating temperature -40oC to + 85oC Input/Output Isolation 1500VDC Continuous short circuit protection Low profile metal package Models Single output Model AM15E-1203SZ AM15E-1205SZ AM15E-1207SZ AM15E-1209SZ AM15E-1212SZ AM15E-1215SZ AM15E-1218SZ AM15E-1224SZ AM15E-2403SZ AM15E-2405SZ AM15E-2407SZ AM15E-2409SZ AM15E-2412SZ AM15E-2415SZ AM15E-2418SZ AM15E-2424SZ AM15E-4803SZ AM15E-4805SZ AM15E-4807SZ AM15E-4809SZ AM15E-4812SZ AM15E-4815SZ AM15E-4818SZ AM15E-4824SZ Input Voltage (V) Output Voltage (V) Output Current max (A) Capacitive load, max (µF) Efficiency (%) 9-18 9-18 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 36-72 36-72 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3 3 2.083 1.66 1.25 1 0.833 0.625 3 3 2.083 1.66 1.25 1 0.833 0.625 3 3 2.083 1.66 1.25 1 0.833 0.625 3300 3300 2200 1000 1000 680 470 470 3300 3300 2200 1000 1000 680 470 470 3300 3300 2200 1000 1000 680 470 470 80 82 83 85 85 85 85 86 80 84 84 85 85 86 86 87 80 84 84 85 86 87 87 87 Input Voltage (V) Output Voltage (V) Output Current max (A) Capacitive load, max (µF) Efficiency (%) 9-18 9-18 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±3.3 ±5 ±7.2 ±9 ±1.5 ±1.5 ±1.041 ±0.833 ±0.625 ±0.5 ±0.416 ±0.312 ±1.5 ±1.5 ±1.041 ±0.833 ±1000 ±1000 ±680 ±470 ±470 ±330 ±220 ±220 ±1000 ±1000 ±680 ±470 80 82 83 84 84 84 85 85 80 83 84 85 Models Dual output Model AM15E-1203DZ AM15E-1205DZ AM15E-1207DZ AM15E-1209DZ AM15E-1212DZ AM15E-1215DZ AM15E-1218DZ AM15E-1224DZ AM15E-2403DZ AM15E-2405DZ AM15E-2407DZ AM15E-2409DZ www.aimtec.com F 051e R12.E Rev: 04/21/A Tel: +1 514 620 2722 1 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15E-Z 15 Watt | DC-DC Converter Models Dual output (continued) Model AM15E-2412DZ AM15E-2415DZ AM15E-2418DZ AM15E-2424DZ AM15E-4803DZ AM15E-4805DZ AM15E-4807DZ AM15E-4809DZ AM15E-4812DZ AM15E-4815DZ AM15E-4818DZ AM15E-4824DZ Input Voltage (V) Output Voltage (V) Output Current max (A) Capacitive load, max (µF) Efficiency (%) 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 36-72 36-72 36-72 ±12 ±15 ±18 ±24 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±0.625 ±0.5 ±0.416 ±0.312 ±1.5 ±1.5 ±1.041 ±0.833 ±0.625 ±0.5 ±0.416 ±0.312 ±470 ±330 ±220 ±220 ±1000 ±1000 ±680 ±470 ±470 ±330 ±220 ±220 86 86 87 87 80 84 84 85 86 87 87 87 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity -0.7 > -0.7 > -0.7 Peak Input Voltage time Input reflected ripple current Maximum Units VDC VDC VDC 25 50 100 100 ms VDC VDC VDC ms mA p-p Rated Units 1500 VDC VDC VDC MOhm pF Maximum Units ±1 % 35 Isolation Specifications Parameters Tested I/O voltage Case to Input Case to Output Resistance Capacitance Conditions Typical 60 sec 60 sec 60 sec 1000 1000 > 1000 500 Output Specifications Parameters Voltage accuracy Short Circuit protection Short circuit restart Over current protection Line voltage regulation Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Ripple & Noise* Start up time Conditions Typical Continuous Auto Recovery 140 HL-LL 0-100% load 0-100% load ±0.5 ±0.5 ±1.0 ±0.02 At 20MHz Bandwidth Nominal Vin with constant resistive load 100 20 % of Iout % % % %/°C mV p-p ms * Measured at 20MHz bandwidth with a 1uF ceramic capacitor. www.aimtec.com F 051e R12.E Rev: 04/21/A Tel: +1 514 620 2722 2 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15E-Z 15 Watt | DC-DC Converter General Specifications Parameters Conditions Typical Switching frequency Operating temperature Storage temperature Maximum case temperature Derating Cooling Humidity Case material Potting material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Transient recovery time Transient recovery deviation 100% load derating above 70°C 200 -40 to +85 -40 to +125 Maximum 100 60 to 85°C 2.5 Free air convection Units KHz °C °C °C %/ °C 95 % Nickel coated copper UL94V-0 rated 31 g Tolerance ±0.5mm 2.00 x 1.00 x 0.40inches 50.80 x 25.40 x 10.16mm > 1,121,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25°C) 1.5mm from case for 10 sec 260 °C Load step change 75% to 50% to 25% 250 µS Load step change 75% to 50% to 25% ±3 % Safety Specifications Parameters Agency approvals Standards www.aimtec.com F 051e R12.E Rev: 04/21/A CE, cULus 62368-1 Design to meet IEC/EN62368-1 EN 55032 – Class A with recommended EMC circuit EN 55024 – Class A IEC61000-4-2, Criteria A IEC61000-4-3, Criteria A IEC61000-4-4, Criteria A IEC61000-4-5, Criteria A (external 220uF/100V cap required) IEC61000-4-6, Criteria A IEC61000-4-8, Criteria A Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15E-Z 15 Watt | DC-DC Converter Pin Out Specifications Pin 1500VDC 1 2 3 4 5 Single Dual +V Input -V Input +V Output No Pin -V Output +V Input -V Input +V Output Common -V Output 2.54 (0.10) Dimensions: 50.80 (2.00) Bottom View 15.24 (0.60) 10.16 (0.40) 10.16 (0.40) 10.16 (0.40) 5 Built-in Stand-offs to ease PCB cleaning 20.32 (0.80) 15.24 (0.60) All dimensions are typical in millimeters (inches) Pin Diameter: 1.00 ± 0.05 (0.04 ± 0.002) Pin Pitch And Length Tolerance: ± 0.35 (±0.014) Case Tolerance: ± 0.5 (±0.02) 6.00 (0.24) DIA 1.00 (0.04) 4 2 10.16 (0.40) 25.40 (1.00) 5.08 (0.20) 1 2.54 (0.10) 10.16 (0.40) 3 Derating Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C www.aimtec.com F 051e R12.E Rev: 04/21/A Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15E-Z 15 Watt | DC-DC Converter EMC recommended circuit CY1 1808, 1nF/3KV LDM 12uH + Vin + Vin + C1 330uF/ 100V - Vin + Vout +Vout + C2 100uF/ 100V DC - Vin DC - Vout - Vout NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity