AM15EW-2412SZ

Click on Series name for product info on aimtec.com Series AM15EW-Z 15 Watt | DC-DC Converter FEATURES: • • • • • • RoHS compliant Efficiency up to 86% Wide 4:1 input range Continuous Short Circuit Protection Low ripple and noise Remote on/off control ● Input/Output Isolation 1500VDC ● Operating temperature -40°C to + 85°C Models Single output Model Input Voltage (V) AM15EW-2403SZ AM15EW-2405SZ AM15EW-2412SZ AM15EW-2415SZ AM15EW-4803SZ AM15EW-4805SZ AM15EW-4812SZ AM15EW-4815SZ Add suffix “-K” for optional heatsink Output Voltage (V) Output Current max (A) Capacitive load (μF) Efficiency (%) 9-36 9-36 9-36 9-36 18-72 18-72 18-72 18-72 3.3 5 12 15 3.3 5 12 15 3 3 1.25 1 3 3 1.25 1 3300 3300 680 470 3300 3300 680 470 80 83 85 86 80 83 85 86 Input Voltage (V) Output Voltage (V) Output Current max (A) Capacitive load (μF) Efficiency (%) 9-36 9-36 9-36 18-72 18-72 18-72 ±5 ±12 ±15 ±5 ±12 ±15 ±1.5 ±0.625 ±0.5 ±1.5 ±0.625 ±0.5 ±2200 ±470 ±330 ±2200 ±470 ±330 83 85 86 83 85 86 Models Dual output Model AM15EW-2405DZ AM15EW-2412DZ AM15EW-2415DZ AM15EW-4805DZ AM15EW-4812DZ AM15EW-4815DZ Add suffix “-K” for optional heatsink Input Specifications Parameters Voltage range Filter Remote ON/OFF Control Input reflected ripple current Start up time Absolute Maximum Rating Peak Input Voltage time Under Voltage Lockout Nominal Typical Maximum Units 24 48 9-36 VDC 18-72 VDC π (Pi) Network ON –2.5 to 5.5VDC (or open) ; OFF – 0 to 0.8VDC or short pin 2 to pin 1; OFF idle current – 2.5mA 20 mA p-p 20 ms 24 Vin > -0.7 50 VDC 48 Vin > -0.7 100 VDC 100 ms 24 Vin on/off 8.6/8 VDC 48 Vin on/off 16/14 VDC Isolation Specifications Parameters Tested I/O voltage Case/ Input & Output Resistance Capacitance www.aimtec.com F 051e R6.E Rev: 04/21/A Conditions Typical 60 sec 1000 > 1000 1200 Tel: +1 514 620 2722 1 of 4 Rated Units 1500 VDC VDC MOhm pF Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15EW-Z 15 Watt | DC-DC Converter Output Specifications Parameters Voltage accuracy Voltage balance* Short Circuit protection Short Circuit restart Over current protection Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise** Start up time Conditions Dual Output Typical Maximum Units ±1 % % ±5 Continuous Auto Recovery 140 HL-LL 0-100% load ±0.5 ±1.0 ±0.02 At 20Mhz bandwidth 75 20 % of Iout max % % %/°C mV p-p ms * One of the outputs is at 100% load while the other output is at 25% to 100% load. ** Measured at 20MHz bandwidth with a 1uF ceramic capacitor. General Specifications Parameters Conditions Typical Switching frequency Operating temperature Storage temperature Maximum Case temperature 100% load , Variable Derating above 60°C 300 -40 to +85 -40 to +125 100 With heatsink, 60 to 85°C Without heatsink, 70 to 85°C Derating Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Maximum 2.5 3.33 Free air convection Units KHz °C °C °C %/°C %/°C 95 % Nickel coated copper Regular models 31 g Optional -K Models 42.3 g Regular models 2.00 x 1.00 x 0.40inches 50.80 x 25.40 x 10.16mm Optional -K models 2.00 x 1.00 x 0.64inches 50.80 x 25.40 x 16.30mm >1 121 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25°C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity