AM1DM-0512SH60-NZ

Click on Series name for product info on aimtec.com Series AM1DM-NZ 1 Watt | DC-DC Converter FEATURES: • • • • 7 pin SIP package High efficiency up to 81% Reinforced insulation Leakage current < 2µA • • • • • Operating temperature -40°C to + 85°C Isolation voltage: 4200VAC or 6000VDC Ultra-low Isolation capacitance of 5pF IEC/EN/UL60601-1 1xMOPP/2xMOOP Models Single output Model AM1DM-0305SH60-NZ AM1DM-0503SH60-NZ AM1DM-0505SH60-NZ AM1DM-0512SH60-NZ AM1DM-0515SH60-NZ AM1DM-1205SH60-NZ AM1DM-1212SH60-NZ AM1DM-1215SH60-NZ AM1DM-2405SH60-NZ AM1DM-2412SH60-NZ AM1DM-2415SH60-NZ Input Voltage (V) Output Voltage (V) Output Current max (mA) Max. Capacitive Load (µF) Isolation (VDC) Isolation (VAC) Efficiency (%) 2.97-3.63 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 5 3.3 5 12 15 5 12 15 5 12 15 200 303 200 84 67 200 84 67 200 84 67 1000 1000 1000 470 470 1000 470 470 1000 470 470 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 4200 4200 4200 4200 4200 4200 4200 4200 4200 4200 4200 71 73 78 76 76 77 81 81 76 78 78 Input Voltage (V) Output Voltage (V) Output Current max (mA) Max. Capacitive Load (µF) Isolation (VDC) Isolation (VAC) Efficiency (%) 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±15 ±5 ±9 ±12 ±15 ±100 ±56 ±42 ±34 ±100 ±56 ±42 ±34 ±34 ±100 ±56 ±42 ±34 470 470 220 220 470 470 220 220 220 470 470 220 220 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 4200 4200 4200 4200 4200 4200 4200 4200 4200 4200 4200 4200 4200 78 80 74 76 77 80 73 75 72 75 79 76 76 Models Dual output Model AM1DM-0505DH60-NZ AM1DM-0509DH60-NZ AM1DM-0512DH60-NZ AM1DM-0515DH60-NZ AM1DM-1205DH60-NZ AM1DM-1209DH60-NZ AM1DM-1212DH60-NZ AM1DM-1215DH60-NZ AM1DM-1515DH60-NZ AM1DM-2405DH60-NZ AM1DM-2409DH60-NZ AM1DM-2412DH60-NZ AM1DM-2415DH60-NZ Input Specifications Parameters Voltage range Absolute Max Input Voltage (1s) www.aimtec.com F 051e R7 Rev # 1.91A10 Rev: 06/22/A Nominal Typical 3.3 5 12 15 24 3.3V 5V 12V 15V 24V 2.97-3.63 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 Maximum VDC -0.7 - 7 -0.7 - 9 -0.7 – 18 -0.7 – 21 -0.7 - 30 Tel: +1 514 620 2722 1 of 4 Units VDC Toll free: + 1 888 9 AIMTEC (926 6832) North America only Series AM1DM-NZ 1 Watt | DC-DC Converter Filter Input reflected ripple current Capacitor 200 45/426 35/274 15/114 18/93 10/56 3.3 5 12 15 24 Input Current (no load/full load) mA p-p mA Isolation Specifications Parameters Conditions Tested I/O voltage Typical 60sec Resistance Capacitance Leakage current Rated Units 4200 6000 VAC VDC MOhm pF µA > 1000 5 250VAC, 50/60Hz 2 Output Specifications Parameters Conditions Typical Voltage accuracy Short Circuit protection Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise Maximum Units See tolerance graph Momentary (3 sec.) For 1.0% of Vin, 3.3V Others 10~100% load, 3.3V & 5V 10~100% load, Others Full load At 20MHz Bandwidth, 3.3V Others ±1.5 ±1.2 20 15 ±0.02 80 70 % of Vout % %/oC 150 120 mV p-p Maximum Units General Specifications Parameters Conditions Typical Switching frequency 100% load 100 KHz o Max Case temperature 100 C o Operating temperature With no derating -40 to +85 C o Storage temperature -55 to +125 C Cooling Free air convection Humidity 95 % Case material Black flame-retardant and heat-resistant plastic (UL94V-0) Weight 4.2 g Dimensions (L x W x H) 0.77 x 0.39 x 0.49 inch 19.50 x 9.80 x 12.5 mm MTBF >3,500,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity