AM1DS-0324SJZ

Click on Series name for product info on aimtec.com Series AM1DS-N(J)Z 1 Watt | DC-DC Converter FEATURES: • • • • RoHS compliant High efficiency up to 85% Low profile plastic package 7 pin SIP package • • • • Operating temperature -40°C to + 105°C Continuous short circuit protection Pin compatible with multiple manufacturers Up to 3000VDC Isolation Models Single output Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) AM1DS-0303S-NZ‡* AM1DS-0305S-NZ‡* AM1DS-0505S-NZ AM1DS-0503SJZ* AM1DS-0505SJZ AM1DS-0509SJZ* AM1DS-0512SJZ* AM1DS-0515SJZ* AM1DS-0524SJZ* AM1DS-0509S-NZ AM1DS-0524S-NZ‡ AM1DS-1205S-NZ AM1DS-1209S-NZ AM1DS-1212S-NZ AM1DS-1215S-NZ AM1DS-1515S-NZ* AM1DS-2403S-NZ‡* AM1DS-2405S-NZ‡ AM1DS-2412S-NZ‡ AM1DS-2415S-NZ‡ AM1DS-2424S-NZ‡ 3.0-3.6 3.0-3.6 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 5 3,3 5 9 12 15 24 9 24 5 9 12 15 15 3.3 5 12 15 24 303 200 200 303 200 111 84 67 42 111 42 200 111 84 67 67 303 200 84 67 42 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 426 426 281 270 270 241 241 241 241 281 281 106 106 106 106 84 54 54 54 54 54 AM1DS-0305SH30-NZ‡* AM1DS-0503SH30JZ* AM1DS-0505SH30JZ* AM1DS-0509SH30JZ* AM1DS-0512SH30JZ* AM1DS-0515SH30JZ* AM1DS-0524SH30JZ* AM1DS-0505SH30-NZ AM1DS-0515SH30-NZ AM1DS-0524SH30-NZ‡ AM1DS-1205SH30-NZ AM1DS-1209SH30-NZ AM1DS-1212SH30-NZ AM1DS-1215SH30-NZ AM1DS-1224SH30-NZ AM1DS-2405SH30-NZ‡ AM1DS-2409SH30-NZ‡ AM1DS-2412SH30-NZ‡ AM1DS-2415SH30-NZ‡ AM1DS-2424SH30-NZ‡ 3.0-3.6 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 5 3.3 5 9 12 15 24 5 15 24 5 9 12 15 24 5 9 12 15 24 200 303 200 111 84 67 42 200 67 42 200 111 83 67 42 200 111 83 67 42 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 415 270 270 241 241 241 241 274 274 274 114 114 114 114 114 58 58 58 58 58 Model Input Current Full Load | No Load (mA) Max. Capacitive Load (µF) Efficiency (%) 30 30 25 5 5 12 12 18 18 25 25 15 15 15 15 10 7 7 7 7 7 220 220 220 2400 2400 1000 560 560 220 220 220 220 220 220 220 220 220 220 220 220 220 72 78 80 74 82 83 83 83 85 80 80 80 80 80 80 80 74 80 80 80 80 25 5 5 12 12 18 18 20 20 20 15 15 15 15 15 7 7 7 7 7 220 2400 2400 1000 560 560 220 220 220 220 220 220 220 220 220 220 200 220 220 220 78 74 82 83 83 83 85 80 81 81 80 80 80 81 81 79 80 81 81 81 Note: The AM1DS-0524S-NZ model will be discontinued (EOL) by December 30, 2020; for new designs, please refer to AM1DS0524SJZ. www.aimtec.com F 051e R12.L REV: 08/20/A Tel: +1 514 620 2722 1 of 9 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-N(J)Z 1 Watt | DC-DC Converter Models Dual output Input Voltage (V) Output Voltage (V) Output Current max (Ma) Isolation (VDC) AM1DS-0305D-NZ* AM1DS-0312D-NZ* AM1DS-0505D-NZ AM1DS-0503DJZ* AM1DS-0505DJZ AM1DS-0509DJZ* AM1DS-0512DJZ* AM1DS-0515DJZ* AM1DS-0524DJZ* AM1DS-0509D-NZ AM1DS-0512D-NZ AM1DS-0515D-NZ AM1DS-0524D-NZ‡ AM1DS-1205D-NZ AM1DS-1212D-NZ AM1DS-1215D-NZ AM1DS-1512D-NZ* AM1DS-1515D-NZ AM1DS-2405D-NZ‡ AM1DS-2412D-NZ‡ AM1DS-2415D-NZ‡ AM1DS-2424D-NZ‡ 2.97-3.63 2.97-3.63 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 ±5 ±12 ±5 ±3.3 ±5 ±9 ±12 ±15 ±24 ±9 ±12 ±15 ±24 ±5 ±12 ±15 ±12 ±15 ±5 ±12 ±15 ±24 ±100 ±42 ±100 ±152 ±100 ±56 ±42 ±34 ±21 ±56 ±42 ±34 ±21 ±100 ±42 ±34 ±42 ±34 ±100 ±42 ±34 ±21 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 274 248 281 270 270 241 241 241 241 281 281 281 281 106 106 106 84 84 54 54 54 54 AM1DS-0503DH30JZ* AM1DS-0505DH30JZ AM1DS-0509DH30JZ AM1DS-0512DH30JZ AM1DS-0515DH30JZ AM1DS-0524DH30JZ AM1DS-0505DH30-NZ AM1DS-0509DH30-NZ AM1DS-0512DH30-NZ AM1DS-0515DH30-NZ AM1DS-0524DH30-NZ‡ AM1DS-1205DH30-NZ AM1DS-1212DH30-NZ AM1DS-1215DH30-NZ AM1DS-1224DH30-NZ AM1DS-2405DH30-NZ‡ AM1DS-2409DH30-NZ‡ AM1DS-2412DH30-NZ‡ AM1DS-2415DH30-NZ‡ AM1DS-2424DH30-NZ‡ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 ±3.3 ±5 ±9 ±12 ±15 ±24 ±5 ±9 ±12 ±15 ±24 ±5 ±12 ±15 ±24 ±5 ±9 ±12 ±15 ±24 ±152 ±100 ±56 ±42 ±34 ±21 ±100 ±56 ±42 ±33 ±21 ±100 ±42 ±34 ±21 ±100 ±56 ±42 ±33 ±21 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 270 270 241 241 241 241 274 274 274 274 274 114 114 114 114 58 58 58 58 58 Model Input Current Full Load | No Load (mA) Max. Capacitive Load (µF) Efficiency (%) 20 20 25 5 5 12 12 18 18 25 25 25 25 15 15 15 10 10 7 7 7 7 ±100 ±100 ±100 ±1200 ±1200 ±470 ±220 ±220 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 78 78 80 74 82 83 83 83 85 80 80 80 80 80 80 80 80 80 80 80 80 80 5 5 12 12 18 18 20 20 20 20 20 15 15 15 15 7 7 7 7 7 ±1200 ±1200 ±470 ±220 ±220 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 ±100 74 82 83 83 83 85 80 80 80 81 81 80 81 81 80 80 80 81 79 80 ‡ With Momentary short circuit protection of 1 second * Reference in the Safety Table NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity1000 20 Output Specifications Parameters Voltage accuracy Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise www.aimtec.com F 051e R12.L REV: 08/20/A Conditions Typical See voltage accuracy graph Continuous, unless marked with ‡ Auto recovery 3.3V output For 1% change of Vin others 3.3V output 18 5V output 12 9V output 9 load 10~100% 12V output 8 15V output 7 24V output 6 3.3V output 15 5V output 10 load 10~100% 9V output 8 for JZ models 12V output 7 15V output 6 24V output 5 Full load Full load for JZ models ±0.02 3.3, 5, 12V output 30 20MHz Bandwidth for 3KV isolation models 15, 24V output 60 24V output 30 20MHz Bandwidth for JZ models Others 50 20MHz Bandwidth for 1.5KV isolation models 60 Tel: +1 514 620 2722 3 of 9 % 1.5 1.2 20 15 10 10 10 10 ±0.03 75 100 150 % of Vin % %/°C mV p-p Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-N(J)Z 1 Watt | DC-DC Converter General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Cooling Humidity Case material Conditions Typical 100% load 100% load for JZ models With derating above 85°C 100 270 -40 to +105 -55 to +125 Maximum Units KHz °C °C °C 130 Free air convection Non-condensing 95 % RH Non-conductive black plastic (UL94V-0 rated) Others 2.4 g for JZ models 2.1 Others 0.77 x 0.24 x 0.37inches 19.50 x 6.00 x 9.30mm for JZ models 0.77 x 0.24 x 0.4inches 19.65 x 6.00 x 10.16mm >3,500,000hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) 1.5 mm from case for 10sec 300 °C Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Safety Specifications Parameters cULus (except the models marked with *) Agency approvals Information technology Equipment EMI - Conducted and radiated emission Standards Electrostatic Discharge Immunity UL 60950-1 UL 62368-1 for JZ models only EN55032 Class B with recommend circuit IEC 61000-4-2 Contact ±6KV Criteria B for single output models IEC 61000-4-2 Contact ±8KV Criteria B for dual output models IEC 61000-4-2 Contact ±6kV, Air ±8kV Criteria B for JZ models Voltage Accuracy Graph 3.3V output models 3.3V output models with suffix JZ 12% Typi c al lo a d lin e +1% Output Voltage Accuracy% 5% Rated Output Voltage -5% -7.5% -15% 10 % 50 % 5% Rated Output Voltage 100 % F 051e R12.L REV: 08/20/A line +2% -5% -12% 10 % 50 % 100 % Output Current% (Nominal Input) Output Current% (Nominal Input) www.aimtec.com Typic al loa d Output Voltage Accuracy% 10% Tel: +1 514 620 2722 4 of 9 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-N(J)Z 1 Watt | DC-DC Converter Other models 10 % Typic al loa d 5% Rated Output Voltage line +2.5 % Output Voltage Accuracy% -2.5 % -7.5 % 70 % 50 % 10 % 100 % Output Current % (Nominal Input) Typical Application Circuit Single Dual Vin+ Vo+ Vin+ Vo+ Cout Cout Cin Cout Vin- Vin 3.3 & 5 V 12 V 15 V 24 V Com Cin Vo- Cin 4.7 2.2 2.2 1 Vout (Single) 3.3 & 5 V (9V for 3KV isolation models) 9 & 12 V 15 & 24 V - Vin- Vo- Cout (Single) 10µF 2.2 µF 1 µF - Vout (Dual) ±3.3 & ±5 V ±9 & ±12 V ±15 & ±24 V - Cout (Dual) 4.7 µF 1 µF 0.47 µF - EMC Recommended Circuit (Class B) Single Output LDM 6.8uH Vin CY C1 4.7uF /50V DC + Vout DC Cout -Vin Vin 3.3, 5, 12V 15, 24V - Vout CY 1nF/2KVDC (1.5KV isolation models) www.aimtec.com F 051e R12.L REV: 08/20/A Cout Refer to typical application circuit Tel: +1 514 620 2722 5 of 9 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-N(J)Z 1 Watt | DC-DC Converter EMI Recommended Circuit (Class B) for models with suffix JZ LDM 6.8uH Vin C1 4.7uF /25V Single Output C2 4.7uF /25V DC + Vout DC Cout -Vin - Vout CY Vout 3.3, 5, 9V 12, 15, 24V CY 1nF/4KVDC Cout Refer to typical application circuit Derating Free Air Convection 85º C Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 80 85 105 100 Ambient Temperature º C www.aimtec.com F 051e R12.L REV: 08/20/A Tel: +1 514 620 2722 6 of 9 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-N(J)Z 1 Watt | DC-DC Converter Pin Out Specifications 1500 VDC isolation Pin Single + V Input - V Input - V Output No pin + V Output No pin 1 2 4 5 6 7 Dual + V Input - V Input - V Output Common + V Output No pin 3000 VDC isolation Single + V Input - V Input No pin - V Output No pin + V Output Dual + V Input - V Input No pin - V Output Common + V Output Dimensions 19.50 (0.77) 6.00 (0.24) PRINTED FACE 9.30 (0.37) 0.30 (0.02) 9.30 (0.37) 4.10 (0.16) 2.54 (0.10) 15.24 (0.60) 6.00 (0.24) 0.50 (0.02) 0.50 (0.02) NOTE: Unit:mm [inch] Pin tolerances: 0.10mm [ 0.004inch] General tolerances: 0.25mm [ 0.010inch] 0.3 (0.012) 1.65 (0.065) Dimensions for part numbers with suffix JZ 19.65 (0.77) 6.00 (0.24) PRINTED FACE 9.66 (0.38) 0.50 (0.02) 6.00 (0.24) 10.16 (0.40) 4.10 (0.16) 2.54 (0.10) 15.24 (0.60) 0.50 (0.02) 0.50 (0.02) NOTE: Unit:mm [inch] Pin tolerances: 0.10mm [ 0.004inch] General tolerances: 0.25mm [ 0.010inch] 0.25 (0.01) 1.50 (0.06) www.aimtec.com F 051e R12.L REV: 08/20/A Tel: +1 514 620 2722 7 of 9 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-N(J)Z 1 Watt | DC-DC Converter Typical Efficiency Example Charts Eff % AM1DS-0305S-NZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 10% 20% 30% 40% 50% 60% Loading % 70% 80% 90% 100% 90% 100% 90% 100% AM1DS-0505S-NZ Efficiency vs. Loading 100 Eff % 80 60 40 20 0 10% 20% 30% 40% 50% 60% Loading % 70% 80% Eff % AM1DS-1205S-NZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 10% 20% 30% 40% 50% 60% 70% 80% Loading % www.aimtec.com F 051e R12.L REV: 08/20/A Tel: +1 514 620 2722 8 of 9 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1DS-N(J)Z 1 Watt | DC-DC Converter Eff % AM1DS-1515S-NZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 10% 20% 30% 40% 50% 60% Loading % 70% 80% 90% 100% 90% 100% Eff % AM1DS-2412S-NZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 10% 20% 30% 40% 50% 60% Loading % 70% 80% NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity