AM1GU-1215DH30JZ

AM1GU-JZ DC-DC Converter DC-DC Converter Preliminary Click to ORDER AM1GU-JZ samples Aimtec introduces the AM1GU-JZ series of DC/DC converters, is part of Aimtec’s first 8:1 ultrawide input voltage range product. The impressive 4.5-36VDC input voltage can help power applications with widely varying inputs. These converters can also help reduce the total BOM by replacing multiple DC/DC converters with different narrower input voltage ranges with one cost-effective isolated DC-DC solution. With 5, 12, 15, ± 5, ± 12, ± 15VDC output voltage options, the AM1DU is well suited for industrial and commercial applications. These products have an impressive operating temperature range of -40℃ to 105℃ with full power up to 75℃. They also feature isolation of 3000VDC and a high MTBF of 1,000,000h for improved reliability and system safety. Features such as output short circuit protection (OSCP), output over-current protection (OCP), and input under-voltage protection (UVLO) come standard with this family of products. The AM1GU-JZ series is ideal for Battery operated circuits, IoT, analog circuits, grid power, LED, instrumentation, industrial controls, communication, and civil applications. SIP 8 Summary Features • • • • • • • Wide 8:1 Input Range: 4.5VDC – 36VDC Operating Temp: -40 °C to +105 °C Low ripple & noise, up to 100mV(p-p) max Efficiency up to 74% Output short circuit, over current protection, Input under-voltage protection Regulated Output No load power consumption low to 0.12W AM1GU-JZ 1500 48 6000 250 125 105 105 3000 75 15 36 4.5 3 5 500 1.2 Input voltage Output voltage (VDC) (V) Isolation (VAC) 1 Power (W) -40 -40 Temp. range (℃) Derating (℃) Applications Training Press Release Coming Soon! Power Grid Product Training Video (click to open) F 052e R4 Industrial Telecom Instrumentation Application Notes www.Aimtec.com 1 AM1GU-JZ DC-DC Converter DC-DC Converter Preliminary Models & Specifications Single Output Model Input Voltage (VDC) Output Voltage (VDC) AM1GU-1205SH30JZ AM1GU-1209SH30JZ AM1GU-1212SH30JZ AM1GU-1215SH30JZ 12 (4.5 ~ 36) 12 (4.5 ~ 36) 12 (4.5 ~ 36) 12 (4.5 ~ 36) 5 9 12 15 Model Input Voltage (VDC) Output Voltage (VDC) AM1GU-1205DH30JZ AM1GU-1212DH30JZ AM1GU-1215DH30JZ 12 (4.5 ~ 36) 12 (4.5 ~ 36) 12 (4.5 ~ 36) ±5 ± 12 ± 15 Input Current Max (mA) No Load Full Load 15 15 15 15 123 120 120 120 Output Current Max (mA) Maximum Capacitive Load (µF) Efficiency (%) Full Load 200 111 83 67 470 220 330 220 71 72 74 74 Output Current Max (mA) Maximum Capacitive Load (µF) Efficiency (%) Full Load ± 100 ± 42 ± 33 ± 220 ± 150 ± 68 71 74 74 Dual Output Input Current Max (mA) No Load Full Load 15 15 15 123 120 120 Input Specification Parameters Voltage range Filter Absolute maximum rating Reflected ripple current Start-up voltage Under voltage protection Conditions Typical Maximum See models table Units VDC Capacitance filter 1 sec. max 50 50 VDC mA pk-pk 5 3.5 VDC VDC Isolation Specification Parameters Tested I/O voltage Resistance Capacitance Conditions Typical Maximum Units 60 sec, 1mA max I/O resistance at 500VDC I/O capacitance at 100KHz/0.1V > 3000 > 1000 40 Conditions Typical Maximum Units ±1 ±3 ± 0.5 ±1 ±1 ± 1.5 ±5 300 % VDC MΩ pF Output Specification Parameters Voltage accuracy Line regulation Load regulation Cross regulation Over current protection Short circuit protection F 052e R4 + Vout Full load (Vin min to Vin max) - Vout + Vout 5 ~ 100% load - Vout Dual outputs, Vo1 50% load, Vo2 25%~100% load > 110 Continuous, Auto recovery www.Aimtec.com % % % % Iout 2 AM1GU-JZ DC-DC Converter DC-DC Converter Preliminary Full load ± 0.03 %/ oC 20MHz bandwidth, 5 ~ 100% load 60 100 mV pk-pk 25% load step change 300 500 µS Output 5V / ± 5V ±5 ±8 25% load step change % Transient response deviation Others ±3 ±5 * Ripple and Noise are measured at 20MHz bandwidth by using a 1μF (M/C) and 22μF (E/C) parallel capacitor and typical input with full load Temperature coefficient Ripple & Noise* Transient recovery time General Specifications Parameters Switching frequency Operating temperature Storage temperature Soldering temperature Cooling Humidity Case material Vibration Weight Dimensions (L x W x H) MTBF Conditions Typical 100% load. PWM mode See derating graph 300 -40 to +105 -55 to +125 1.5mm from case 10 sec max Maximum Units 300 KHz oC oC oC Free air convection Non-condensing 95 % RH Heat resistant black Plastic (flammability to UL 94V-0) 10-150Hz, 5G, 0.75mm along X,Y and Z PCB mountable model 4.6 g PCB mountable model 0.87 x 0.37 x 0.47 inches, 22.00 x 9.50 x 12.00mm > 1 000 000 hrs (MIL-HDBK -217F, t=+25oC) / Full Load Safety Specifications Parameters Designed to meet EN 62368-1 EMC - Conducted and radiated emission Electrostatic Discharge Immunity RF, Electromagnetic Field Immunity Electrical Fast Transient/Burst Immunity Surge Immunity RF, Conducted Disturbance Immunity Standards CISPR32/EN55032, CLASS B with EMI recommended circuit IEC 61000-4-2 Contact ±6KV, Criteria B IEC 61000-4-3 10V/m, Criteria A IEC 61000-4-4 ±2KV, Criteria B with EMS recommended circuit IEC 61000-4-5 L-L ±2KV, Criteria B with EMS recommended circuit IEC 61000-4-6 3Vr.m.s, Criteria A Derating Free Air Convection Vin > 7VDC 100 Output Power (%) Vin 7VDC 80 60 Safe Operating Area 40 20 0 -40 65 75 -20 0 20 40 60 80 105 100 Ambient Temperature º C F 052e R4 www.Aimtec.com 3 AM1GU-JZ DC-DC Converter DC-DC Converter Preliminary Typical Application Circuit Single output +V input +V input + Cin 100uF 50V +V output + Cout 22uF 25V c DC-DC Converter -V input -V input -V output +V input +V input +V output Dual output + Cin 100uF 50V Common + DC-DC Converter -V input -V input + Cout 22uF 25V -V output Cout 22uF 25V It is not allowed to connect modules output in parallel to enlarge the power. EMC Recommended Circuit Single output CY1 1000pF/3000V LCM 2.2mH Recommend AMFC22-1NZ FUSE +V input C1 1000µF 50V + C2 4.7µF 50V LDM 4.7µH +V output +V input C3 4.7µF 50V +V output Cout 22µF 50V + C4 100µF 50V DC-DC Converter -V input -V input -V output -V output CY2 1000pF/1000V For EMI emissions test For EMS immunity test F 052e R4 www.Aimtec.com 4 AM1GU-JZ DC-DC Converter DC-DC Converter Preliminary Dual output CY1 1000pF/3000V LCM 2.2mH Recommend AMFC22-1NZ FUSE +V input C1 1000µF 50V + C2 4.7µF 50V LDM 4.7µH +V output +V input C3 4.7µF 50V +V output + C4 100µF 50V Common DC-DC Converter -V input -V input -V output Cout 22µF 50V Common Cout 22µF 50V -V output CY2 1000pF/1000V For EMI emissions test For EMS immunity test Fuse : Choose according to actual input current. F 052e R4 www.Aimtec.com 5 AM1GU-JZ DC-DC Converter DC-DC Converter Preliminary 9.50 (0.37) 0.70 (0.03) 0.30 (0.01) 2.70 (0.11) Dimensions 12 3 2.11 (0.08) Ø1.00 (0.04) 22.00 (0.87) Note : Grid 2.54*2.54 mm 0.50 (0.02) 4.10 (0.16) 12.00 (0.47) 56 78 Notes: All dimensions are typical in millimeters (inches). Pin section tolerances : ±0.10 (±0.004) General tolerance : ±0.50 (±0.02) 2.54 (0.10) 17.78 (0.70) Pin 1 2 3 5 6 7 8 Pin Out Specifications Single -V Input +V Input NC NC +V Output -V Output NC Dual -V Input +V Input NC NC +V Output Common -V Output NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity