AM1LE-0505SH35JZ

AM1LE-JZ DC-DC Converter Click to ORDER AM1LE-JZ samples The AM1LE-JZ is a DC/DC converter that offers much greater cost effectiveness due to material normalization and production automation also leading to improved reliability and performance. Offering a commercial input voltage range of 5VDC and an output voltage of commonly used 5VDC, this series will offer many benefits to your new system design. This new series offers great operating temperatures, from -40°C to 105°C with full power up to 85°C. It also features high isolation of 3500VDC for improved reliability and system safety. Furthermore, a higher MTBF of 3500,000h, output short circuit protection (OSCP) come standard with the series. The AM1LE-JZ is perfect for information technology, instrumentation, telecom and civil applications. SMD Features • • • • • Summary Operating Temp: -40 °C to +105 °C High isolation voltage: 3500VDC Low ripple & noise, 70mV (p-p), max. Unregulated Output SMD type package AM1LE-JZ 1500 48 6000 60 125 3500 105 105 85 5.5 4.5 5 3.3 1000 1 3 Input voltage Output voltage Isolation (VDC) (VDC) (V) Power (W) - 40 - 40 Temp. range (℃) Derating (℃) Applications Training Press Release Coming Soon! Power Grid Product Training Video (click to open) F 052e R4 Industrial Telecom Instrumentation Application Notes www.Aimtec.com 1 AM1LE-JZ DC-DC Converter Models & Specifications Single Output Model Input Voltage (VDC) AM1LE-0505SH35JZ 5 (4.5-5.5) Input Current Max (mA) No Load Full Load 10 257 Output Voltage (VDC) 5 Output Current Max (mA) 200 Maximum Capacitive Load (µF) 2200 Efficiency (%) Full Load Typ. 82 Typical Maximum Units Input Specification Parameters Voltage range Filter Input reflected ripple current Absolute maximum rating Conditions 5 4.5 – 5.5 Capacitance Filter 15 1s VDC 9 mA pk-pk VDC Maximum Units Isolation Specification Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60 sec, ≤ 1mA 500VDC 100kHz/ 0.1V 3500 ≥1000 20 Conditions Typical VDC MΩ pF Output Specification Parameters Voltage accuracy Line regulation Load regulation Short circuit protection Ripple & Noise* Nominal load (See tolerance graph) ± 2.5 Per 1% of Vin Change 10 ~ 100% load 10 Continues, Auto recovery 20MHz bandwidth 30 Maximum Units 1.2 15 % % % 70 mV pk-pk Maximum Units 120 245 KHz °C °C °C °C General Specifications Parameters Conditions Typical Switching frequency Operating temperature Storage temperature Maximum case temperature Reflow temperature Reflow soldering process Temperature coefficient Cooling Humidity Moisture sensitivity level (MSL) Base material Weight 100% Load, nominal input With derating 270 -40 to +105 -55 to +125 F 052e R4 Over 217°C for less than 60sec IPC/JEDEC J-STD-020D.1 100% Load ± 0.02 Free air convection Non-condensing IPC/JEDEC J-STD-020D.1 Black Plastic (UL94V-0) 1.4 www.Aimtec.com %/ °C 95 Level 1 % RH g 2 AM1LE-JZ DC-DC Converter Dimensions (L x W x H) 0.50 x 0.45 x 0.28 inches (13.20 x 11.40 x 7.25 mm) Vibration 10 – 1000Hz, 10G, 1mm 4cycles along all axels MTBF > 3 500 000 hrs (MIL-HDBK -217F, t=+25°C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity