AM1LS-0505SXZTR

AM1LS-XZ DC-DC Converter Click to ORDER AM1LS-XZ samples The new AM1LS-XZ is a brand-new DC/DC converter that offers much greater cost effectiveness due to material normalization and production automation also leading to improved reliability and performance. Offering a commercial input voltage range of 5VDC and an output voltage 5V, this series will offer many benefits to your new system design. This new series offers great operating temperatures, from -40°C to 105°C with full power up to 85°C. It also features an isolation of 1500VDC for improved reliability and system safety. Furthermore, a higher MTBF of 3500,000h, output short circuit protection (OSCP) come standard with the series. The AM1LS-XZ is perfect for information technology, instrumentation, communication and civil applications. SMD Summary Features • • • • • • No load input current as low as 5mA Operating Temp: -40 °C to +105 °C High I/O isolation voltage : 1500 VDC Output short circuit protection High efficiency up to 82% SMD type package, Industry standard pin-out 24 72 AM1LS-XZ 6000 3 125 105 105 85 1500 5 5 1 1000 0.25 1.2 -40 Input voltage (VDC) Output voltage (V) Isolation (VDC) Power (W) SMD type -40 Temp. range (°C) Derating (°C) Applications Training Press Release Coming Soon! Power Grid Product Training Video (click to open) F 052e R4 REV: 07/20/A Industrial Telecom Instrumentation Application Notes www.Aimtec.com 1 AM1LS-XZ DC-DC Converter Models & Specifications Single Output Model AM1LS-0505SXZ Input Voltage (VDC) 5 (4.5 ~ 5.5) Output Voltage (VDC) 5 Input Current Max (mA) No Load Full Load 10 286 Output Current Max (mA) 200 Isolation (VDC) 1500 Maximum Capacitive Load (µF) 2400 Efficiency (%) Full Load Typ. 82 Input Specification Parameters Voltage range Filter Absolute maximum rating Input reflected ripple current Conditions Typical Maximum 4.5 – 5.5 Capacitor -0.7 ~ 9 15 1 sec, max Units VDC VDC mA Output Specification Parameters Voltage accuracy Line regulation Load regulation Short circuit protection Temperature coefficient Ripple & Noise Conditions Typical Maximum Units 1.2 % 15 % See Typical Characteristic Input voltage change : 1% 10 ~ 100% load 10 Continuous, auto-recovery Full load 20MHz bandwidth Note: Please refer to application notes for Ripple & Noise test information. ±0.02 %/ °C 30 75 mV pk-pk Typical Maximum Units Isolation Specification Parameters Tested I/O voltage Resistance Capacitance Conditions 60 sec, 1mA max 1500 VDC Input to output resistance at 500Vdc >1000 MOhm Input to output, 100KHz/0.1V 20 pF General Specifications Parameters Conditions Typical Maximum Units Switching frequency Full load, nominal input voltage 270 KHz Operating temperature See derating graph -40 to +100 °C Storage temperature -55 to +125 °C Case temperature rise Ta = 25°C 15 °C Maximum case temperature 120 °C Reflow Temperature Maximum duration ≤60s over 217°C 245 °C Lead-free reflow solder process IPC/JEDEC J-STD-020D.1 Cooling Free air convection Humidity Non-condensing 95 % RH Case material Heat resistant black Plastic (flammability to UL 94V-0) Weight 1.4 g Dimensions (L x W x H) 0.5 x 0.44 x 0.25 inches, 12.70 x 11.20 x 6.25mm MTBF > 3 500 000 hrs (MIL-HDBK -217F, t=+25°C) / Full Load Moisture sensitivity level (MSL) IPC/JEDEC J-STD-020D.1 Level 1 All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity