AM1PS-2405S-NZ

Click on Series name for product info on aimtec.com Series AM1PS-NZ 1 Watt | DC-DC Converter FEATURES: • • • • • • • • Unregulated 8 Pin DIP Package Low ripple and noise High efficiency up to 82% Operating temperature -40oC to + 105oC Input / Output isolation 1500 VDC Pin compatible with multiple manufacturers Continuous Short Circuit Protection Models Single output Model AM1PS-0303S-NZ # AM1PS-0305S-NZ # AM1PS-0503S-NZ # AM1PS-0505S-NZ AM1PS-0509S-NZ AM1PS-0512S-NZ AM1PS-0515S-NZ AM1PS-0524S-NZ ‡ AM1PS-1203S-NZ AM1PS-1205S-NZ AM1PS-1209S-NZ AM1PS-1212S-NZ AM1PS-1215S-NZ AM1PS-2403S-NZ # AM1PS-2405S-NZ AM1PS-2409S-NZ AM1PS-2412S-NZ AM1PS-2415S-NZ AM1PS-2424S-NZ Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) 2.97-3.63 2.97-3.63 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 3.3 5 9 12 15 24 3.3 5 9 12 15 3.3 5 9 12 15 24 303 200 303 200 111 84 67 42 303 200 110 83 67 303 200 110 83 67 42 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 Max. Capacitive Load (µF) 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 Efficiency (%) 75 80 76 80 80 81 81 81 76 80 80 81 80 76 80 80 81 82 82 ‡ With Momentary short circuit protection of 1 second NOTE : The model AM1PS-0503S-NZ, AM1PS-0509S-NZ, AM1PS-0515S-NZ and AM1PS-0524S-NZ is not recommended for new designs; For new design, please refer to AM1PS-0503SH30JZ, AM1PS-0509SH30JZ, AM1PS-0515SH30JZ or AM1PS-0524SH30JZ. Input Specifications Parameters Voltage range Absolute Max Rating (1 sec. max.) Nominal Typical 3.3 5 12 15 24 3.3 5 12 15 24 2.97-3.63 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 Maximum VDC 5 9 18 21 30 Filter Units VDC Capacitor Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance www.aimtec.com F 051e R11.C REV: 03/20/A Conditions Typical 60 sec > 1000 20 Tel: +1 514 620 2722 1 of 3 Rated Units 1500 VDC MOhm pF Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1PS-NZ 1 Watt | DC-DC Converter Output Specifications Parameters Voltage accuracy Short Circuit protection Conditions Typical See tolerance graph ±5 Maximum Units % Continuous, unless marked with ‡ For 1.0% Vin, 3.3V Model For 1.0% Vin, Other Model Load 10 – 100% Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise ±1.5 ±1.2 12 ±0.03 60 At 20 MHz Bandwidth % of Vin % %/oC m Vp-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 100 - 300 KHz oC Operating temperature Derating above 85oC -40 to +105 oC Storage temperature -55 to +125 o Maximum case temperature 125 C Cooling Free air convection Humidity Non condensing 95 % Case material Plastic UL94-VO oC Lead Soldering Temperature 1.5mm from Lead, 10 sec max. 300 Weight 1.8 g Dimensions (L x W x H) 0.50 x 0.39 x 0.32 inches 12.70 x 10.00 x 8.20 mm MTBF >3500K hrs(MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity