AM20JW-2405SH30Z

Click on Series name for product info on aimtec.com Series AM20JW-Z 20 Watt | DC-DC Converter FEATURES: • • • • • Models Single output Model Ultra-Wide 4:1 input range Efficiency up to 91% Operating temperature -40°C to + 90°C Continuous Short Circuit Protection Over Current and Over Voltage Protection • • No minimum load required Remote on/off control ● Input / Output Isolation 3000VDC ● Voltage Adjustment ● Soft Start, UVLO Input Voltage (V) Input Current NL | FL (mA) Output Voltage (V) Output Current max (A) Capacitive load (μF) Efficiency (%) 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 10 | 850 10 | 936 10 | 944 15 | 945 8 | 422 8 | 463 8 | 464 8 | 457 3.3 5 12 15 3.3 5 12 15 5.5 4 1.67 1.33 5.5 4 1.67 1.33 10,000 6800 1000 680 10,000 6800 1000 680 89 89 88.5 88 89.5 90 90 91 Input Voltage (V) Input Current NL | FL (mA) Output Voltage (V) Output Current max (A) Capacitive load (μF) Efficiency (%) 9-36 9-36 9-36 18-75 18-75 18-75 10 | 969 15 | 944 15 | 939 8 | 479 8 | 464 10 | 459 ±5 ±12 ±15 ±5 ±12 ±15 ±2 ±0.837 ±0.665 ±2 ±0.837 ±0.665 ±2200 ±470 ±330 ±2200 ±470 ±330 86 88.5 88.5 87 90 90.5 Maximum Units AM20JW-2403SH30Z AM20JW-2405SH30Z AM20JW-2412SH30Z AM20JW-2415SH30Z AM20JW-4803SH30Z AM20JW-4805SH30Z AM20JW-4812SH30Z AM20JW-4815SH30Z Models Dual output Model AM20JW-2405DH30Z AM20JW-2412DH30Z AM20JW-2415DH30Z AM20JW-4805DH30Z AM20JW-4812DH30Z AM20JW-4815DH30Z Input Specifications Parameters Voltage range Filter Remote ON/OFF Control Under Voltage Lockout Startup time Absolute Maximum Rating Peak Input Voltage time Input Reflected Ripple Current* Transient recovery time Transient Response Deviation Nominal Typical 24 48 9-36 18-75 π (Pi) Network ON: 3 ~12Vdc or Open Circuit OFF: 0 ~ 1.2Vdc or short pin 2 & 6 (idle current 2mA typical) 24, ON | OFF 8.8 | 7.6 48, ON | OFF 17.5 | 16.5 30 24 Vin 50 48 Vin 100 100 20 25% load step 250 25% load step, 3.3V single output ±5 25% load step, others ±3 VDC VDC VDC VDC ms VDC VDC ms mA p-p µs % % * The input reflected ripple current should be measured with a 12μH inductor and a 47μF input capacitor (ESR 1000 2000 Tel: +1 514 620 2722 1 of 4 Rated Units VDC VDC MOhm pF Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM20JW-Z 20 Watt | DC-DC Converter Output Specifications Parameters Conditions Typical Maximum Units ±0.5 ±0.5 ±1.0 % % % % % ±10 % of Vout % of Iout max %/°C mV p-p % of Vout Maximum Units 105 KHz KHz °C °C °C Voltage accuracy ±1 Cross regulation (Dual Output) 1st output 25% to 100%, 2nd output 100% ±5 Line voltage regulation HL-LL Load voltage regulation (Single) 0-100% load Load voltage regulation (Dual) 0-100% load, balanced load Short Circuit protection Continuous, auto-recovery Over Voltage Protection 140 Over Current Protection 170 Temperature coefficient ±0.02 Ripple & Noise* At 20Mhz bandwidth 75 Voltage Adjustment Single output only *Measured with 10µF/25V MLCC on each output. General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum Case temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Conditions Typical 100% load, 3.3V and 5V output 100% load, others See Derating curve 270 330 -40 to +90 -55 to +125 Free air convection (30-65 LFM) 95 % Copper 29 g Tolerance ±0.5mm 1.60 x 1.00 x 0.41inches (40.64 x 25.40 x 10.41mm) >400 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25°C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity