AM2D-0509D-N

AM2D-N Series 2 watt dc-dc converters • • • • 7 PIN SIP PACKAGE LOW RIPPLE & NOISE HIGH EFFICIENCY UP TO 82% UL94-VO PACKAGE • • • INPUT/OUTPUT ISOLATION : 1000 & 3000VDC OPERATING TEMPERATURE: -40°C ... +85°C PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS DC-DC CONVERTERS GENERAL DESCRIPTION Our AM2D-N series is a family of cost effective 2W single, dual output isolated DC-DC converters. These converters achieve low cost and ultra-miniature SIP7 pin size without compromising performance and reliability. Forty eight models operate from input voltages of 5, 12 & 24VDC; producing output voltage levels of 5, 9, 12, 15, ±5, ±9, ±12, ±15VDC. Full SMD-design and a 100% production test of parameters ensures a high reliability in this product. ELECTRICAL SPECIFICATIONS Specifications typical at +25°C, nominal input voltage, rated output current unless otherwise specified Input Specifications: Voltage range Filter Isolation Specifications: Rated voltage (60 sec) Resistance Capacitance Output Specifications: Voltage accuracy Voltage balance (dual output) Ripple & noise (at 20MHz BW) Short circuit protection Line voltage regulation Load voltage regulation Temperature coefficient ±10% Capacitor 1000VDC 3000VDC > 1000MOhm 60pF, typ. see tolerance envelope graph ±1% 75mVp-p, typ. 1 sec. ±1.2% / 1.0% of Vin ±8%, load=10~100% ±0.03%/°C, max. General Specifications: Efficiency Switching frequency 78% to 82% 85KHz, typ. 100% load Environmental Specifications: Operating temperature (ambient) -40°C ... +85°C Storage temperature -55°C ... +125°C Case temperature +95°C, max. Derating None required Humidity (non-condensing) Up to 90% Cooling Free-air Convection Physical Specifications: Dimensions Weight Case material 19.50x6.0/7.05x10.00mm 0.76x0.24x0.39inches 2.5g Plastic UL94-VO MTBF: > 800,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25°C) Specifications are subject to change without notification OUTLINE DIMENSIONS & PIN CONNECTIONS Pin Single 1000VDC Dual Single 3000VDC Dual 36 1 2 4 5 6 7 +V Input -V Input -V Output Omitted +V Output Omitted +V Input -V Input -V Output Common +V Output Omitted +V Input -V Input Omitted -V Output Omitted +V Output +V Input -V Input Omitted -V Output Common +V Output TO ORDER CALL 1-888-9-AIMTEC AM2D-N Series MODELS Single output Models Isolation 1000VDC AM2D-0505S-N AM2D-0509S-N AM2D-0512S-N AM2D-0515S-N AM2D-1205S-N AM2D-1209S-N AM2D-1212S-N AM2D-1215S-N AM2D-2405S-N AM2D-2409S-N AM2D-2412S-N AM2D-2415S-N Dual output Models Isolation 1000VDC AM2D-0505D-N AM2D-0509D-N AM2D-0512D-N AM2D-0515D-N AM2D-1205D-N AM2D-1209D-N AM2D-1212D-N AM2D-1215D-N AM2D-2405D-N AM2D-2409D-N AM2D-2412D-N AM2D-2415D-N Isolation 3000VDC AM2D-0505DH30-N AM2D-0509DH30-N AM2D-0512DH30-N AM2D-0515DH30-N AM2D-1205DH30-N AM2D-1209DH30-N AM2D-1212DH30-N AM2D-1215DH30-N AM2D-2405DH30-N AM2D-2409DH30-N AM2D-2412DH30-N AM2D-2415DH30-N Input Voltage Ouput Voltage ±5VDC ±9VDC ±12VDC ±15VDC ±5VDC ±9VDC ±12VDC ±15VDC ±5VDC ±9VDC ±12VDC ±15VDC Ouput Current max. ±200mA ±111mA ±83mA ±67mA ±200mA ±111mA ±83mA ±67mA ±200mA ±111mA ±83mA ±67mA Isolation 3000VDC AM2D-0505SH30-N AM2D-0509SH30-N AM2D-0512SH30-N AM2D-0515SH30-N AM2D-1205SH30-N AM2D-1209SH30-N AM2D-1212SH30-N AM2D-1215SH30-N AM2D-2405SH30-N AM2D-2409SH30-N AM2D-2412SH30-N AM2D-2415SH30-N Input Voltage Ouput Voltage 5VDC 9VDC 12VDC 15VDC 5VDC 9VDC 12VDC 15VDC 5VDC 9VDC 12VDC 15VDC Ouput Current max. 400mA 222mA 167mA 134mA 400mA 222mA 167mA 134mA 400mA 222mA 167mA 134mA 12V±10% 24V±10% 5V±10% 12V±10% 24V±10% TYPICAL CHARACTERISTICS Continued on next page 37 VISIT US AT WWW.AIMTEC.CA DC-DC CONVERTERS 5V±10% AM2D-N Series APPLICATION NOTE Filtering In some circuits which are sensitive to noise and ripple, a filtering capacitor may be added to the DC/DC output end and input end to reduce the noise and ripple. However, the capacitance of the output filter capacitor must be proper. If the capacitance is too big, a startup problem might arise. For every channel of output, provided the safe and reliable operation is ensured, the greatest capacitance of its filter capacitor sees the external capacitor table. To get an extremely low ripple, an “LC” filtering network may be connected to the input and output ends of the DC/DC converter, which may produce a more significant filtering effect. It should also be noted that the inductance and the frequency of the “LC” filtering network should be staggered with the DC/DC frequency to avoid mutual interference (see figure 1). DC-DC CONVERTERS Requirement on output load To ensure this module can operate efficiently and reliably, a minimum load is specified for this kind of DC/DC converter in addition to a maximum load (namely full load). During operation, make sure the specified range of input voltage is not exceeded, the minimum output load is not less than 10% of the full load, and that this product should never be operated under no load! If the actual output power is very small, please connect a resistor with proper resistance at the output end in parallel to increase the load. For single output Overload Protection Under normal operating conditions, the output circuit of these products has no protection against over-current and short-circuits. The simplest method is to connect a self-recovery fuse in series at the input end or add a circuit breaker to the circuit. Output Voltage Regulation and Over-voltage Protection Circuit The simplest device for output voltage regulation, over-voltage and over-current protection is a linear voltage regulator with overheat protection that is connected to the input or output end in series (see Figure 2). For dual output External Capacitor Table for Single Output Vin External Capacitor Vout External Capacitor External Capacitor Table for Dual Output Vin External Capacitor Vout External Capacitor 5VDC 12VDC 24VDC - 4.7uF 2.2uF 1uF - 5VDC 9VDC 12VDC 15VDC 10uF 4.7uF 2.2uF 1uF 5VDC 12VDC 24VDC - 4.7uF 2.2uF 1uF - 5VDC 9VDC 12VDC 15VDC 4.7uF 2.2uF 1uF 0.47uF 38 TO ORDER CALL 1-888-9-AIMTEC