AM2DG-15158.7DH30-NZ

Series AM2DG-NZ 2.1 Watt | DC-DC Converter FEATURES: • I/O Isolation up to 3500VAC • Efficiency up to 81% • Ultra-low Isolation capacitance • • • SIP 7 Multiple Manufacturers pin compatible Extended temperature range: -40 to +105°C Continuous short circuit protection Models Dual output Input Voltage (V) Input current FL (mA) Output Voltage (V) Output Current max (mA) Max Capacitive Load (uF) Efficiency (%) AM2DG-1509SH30-NZ 14.5 – 15.5 84 +9 (8.5 ~ 9.5) +111 220 80 AM2DG-121508DH30-NZ AM2DG-12158.7DH30-NZ AM2DG-15158.7DH30-NZ AM2DG-150909DH30-NZ AM2DG-15178.7DH30-NZ AM2DG-24158.7DH30-NZ 9 - 15 11.6 – 12.4 14.5 – 15.5 14.5 – 15.5 14.5 – 15.5 23.3 – 24.7 223 162 130 84 143 81 +15 (14 ~ 16) / -8 (-7 ~ -9) +15 (14 ~ 16) / -8.7 (-7 ~ -10) +15 (14 ~ 16) / -8.7 (-7 ~ -10) +9 (8.6 ~ 9.4) / -9 (-8.3 ~ -9.7) +17 (16.5 ~ 18) / -8.7 (-7 ~ -10) +15 (14 ~ 16) / -8.7 (-7 ~ -10) +100/-80 +80/-40 +80/-40 +55/-55 +80/-40 +80/-40 220 220 220 220 220 220 80 80 80 80 80 80 AM2DG-12153.5DH35-NZ 10.8-13.2 210 +15 (14.4 ~ 15.9) / -3.5 (-3.3 ~ -4) +111/-111 220 81 Model NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity3,500,000hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) o 1.5 mm from case for 10sec 300 C AM2DG-12153.5DH35-NZ Others Case material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Safety Specifications Parameters Approvals UL UL60950-1 for models with 3000VDC isolation only EN55032 Class B (see recommended circuit) IEC61000-4-2, Perf. Criteria B (ESD Contact ±8KV) for models with 3000VDC isolation IEC61000-4-2, Perf. Criteria B (ESD Contact ±6KV) for models with 3500VDC isolation Standards Pin Out Specifications Pin Dimensions Single Dual + V Input - V Input - V Output Common + V Output 9.80 (0.39) PRINTED FACE 12.50 (0.49) 12.00 (0.47) 0.50 (0.02) 1 + V Input 2 - V Input 5 - V Output 6 N. C.* 7 + V Output * N.C. Not Connected 19.50 (0.77) 4.10 (0.16) 2.54 (0.10) 15.24 (0.60) 9.80 (0.39) NOTE: Unit: mm [inch] Pin Pitch tolerance: ±0.10mm [ ±0.004 inch] Case tolerance: ±0.50mm [ ±0.02 inch] 0.30 (0.01) 1.25 (0.05) Derating 0.50 (0.02) 0.50 (0.02) Free Air Convection AM2DG-12153.5DH35-NZ 100 Output Power (%) Other models 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 80 85 105 100 Ambient Temperature º C www.aimtec.com F 051e R17 REV:09/20/A Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2DG-NZ 2.1 Watt | DC-DC Converter Tolerance Graph +Vo (with exception of AM2DG-12153.5DH35-NZ) -Vo (with exception of AM2DG-12153.5DH35-NZ) Tolerance Envelope Graph +10 % Tolerance Envelope Graph Typical Load Line Typical Load Line +16% + 5% +5% Nominal Voltage Output Voltage -5% 10% 100% 50% Output Current (%) +8% +8% 0% Output Voltage Nominal Voltage 0% -8% 10% 50% Output Current (%) 100% Application Circuit Control circuit +Vin Rg IGBT Driver IGBT +Vo 1 C2 100µF C1 100µF 0V C3 100µF DC-DC Converter 2 -Vin -Vo Note: Low Internal resistance capacitors suggested www.aimtec.com F 051e R17 REV:09/20/A Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2DG-NZ 2.1 Watt | DC-DC Converter EMI Recommended Circuit (Class B) Model AM2DG-12153.5DH35-NZ LDM 6.8uH + Vin C1 4.7uF /50V C2 4.7uF /50V DC DC - Vin - Vin + Vout C3 100uF/ 35V Common C4 100uF/ 35V - Vout + Vout + Vin - Vout Other models LDM1 12uH + Vin LDM2 47uH + Vin C1 4.7uF /50V - Vin C2 4.7uF /50V DC - Vin + Vout DC - Vout + Vout C3 100uF/ 35V Common C4 100uF/ 35V - Vout NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity