AM2DM-0505SH60-NZ

Click on Series name for product info on aimtec.com Series AM2DM-NZ 2 Watt | DC-DC Converter FEATURES: • • • • 7 pin SIP package High efficiency up to 84% Reinforced insulation Leakage current < 2µA • • • • • Operating temperature -40°C to + 85°C Isolation voltage: 4200VAC or 6000VDC Ultra-low Isolation capacitance of 5pF IEC/EN/UL60601-1 1xMOPP/2xMOOP Models Single output Model AM2DM-0505SH60-NZ AM2DM-0512SH60-NZ AM2DM-0515SH60-NZ AM2DM-1205SH60-NZ AM2DM-1212SH60-NZ AM2DM-1215SH60-NZ AM2DM-1505SH60-NZ AM2DM-2405SH60-NZ AM2DM-2412SH60-NZ AM2DM-2415SH60-NZ Input Voltage (V) Output Voltage (V) Output Current max (mA) Max. Capacitive Load (µF) Isolation (VAC) Isolation (VDC) Efficiency (%) 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 5 12 15 5 12 15 5 5 12 15 400 167 133 400 167 133 400 400 167 133 1000 470 470 1000 470 470 1000 1000 470 470 4200 4200 4200 4200 4200 4200 4200 4200 4200 4200 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 77 79 79 77 80 82 77 79 82 84 Input Voltage (V) Output Voltage (V) Output Current max (mA) Max. Capacitive Load (µF) Isolation (VAC) Isolation (VDC) Efficiency (%) 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±200 ±111 ±83 ±67 ±200 ±111 ±83 ±67 ±200 ±111 ±83 ±67 470 470 220 220 470 470 220 220 470 470 220 220 4200 4200 4200 4200 4200 4200 4200 4200 4200 4200 4200 4200 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 78 78 78 80 78 82 82 80 79 81 82 81 Models Dual output Model AM2DM-0505DH60-NZ AM2DM-0509DH60-NZ AM2DM-0512DH60-NZ AM2DM-0515DH60-NZ AM2DM-1205DH60-NZ AM2DM-1209DH60-NZ AM2DM-1212DH60-NZ AM2DM-1215DH60-NZ AM2DM-2405DH60-NZ AM2DM-2409DH60-NZ AM2DM-2412DH60-NZ AM2DM-2415DH60-NZ Input Specifications Parameters Voltage range Absolute Max Input Voltage (1s) Nominal Typical 5 12 15 24 5V 12V 15V 24V 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 www.aimtec.com F 051e R7 Rev: 05/22/A Units VDC -0.7 - 9 -0.7 - 18 -0.7 - 21 -0.7 - 30 Filter Input reflected ripple current Input Current (no load/full load) Maximum VDC Capacitor 200 35/274 15/114 18/171 10/56 5 12 15 24 Tel: +1 514 620 2722 1 of 4 mA p-p mA Toll free: + 1 888 9 AIMTEC (926 6832) North America only Series AM2DM-NZ 2 Watt | DC-DC Converter Isolation Specifications Parameters Conditions Tested I/O voltage Typical Rated Units 4200 6000 2 VAC VDC MOhm pF µA Maximum Units 60sec Resistance Capacitance Leakage current > 1000 5 250VAC, 50/60Hz Output Specifications Parameters Conditions Voltage accuracy Short Circuit protection Line voltage regulation Typical See tolerance graph Momentary (3 sec.) For 1.0% of Vin 10~100% load, 5V 10~100% load, Others Full load At 20MHz Bandwidth Load voltage regulation Temperature coefficient Ripple & Noise ±1.2 20 15 ±0.02 100 % of Vout % 150 %/oC mV p-p Maximum Units General Specifications Parameters Conditions Typical Switching frequency 100% load 100 KHz oC Max Case temperature 100 oC Operating temperature With no derating -40 to +85 oC Storage temperature -55 to +125 Cooling Free air convection Humidity 95 % Case material Black flame-retardant and heat-resistant plastic (UL94V-0) Weight 4.2 g Dimensions (L x W x H) 0.77 x 0.39 x 0.49 inch 19.50 x 9.80 x 12.5 mm MTBF >3,500,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity