AM2DS-051509DH52Z

Click on Series name for product info on aimtec.com Series AM2DS-Z 2 Watt | DC-DC Converter FEATURES: • • • • RoHS compliant SIP7 package High efficiency up to 80% I/O Isolation 5200 VDC Rated working voltage 250VAC and 400VDC • • • Low Ripple and Noise Continuous Short Circuit Protection Low coupling capacity Models Single output Model AM2DS-0503SH52Z AM2DS-0505SH52Z AM2DS-0509SH52Z AM2DS-0512SH52Z AM2DS-0515SH52Z AM2DS-1203SH52Z AM2DS-1205SH52Z AM2DS-1209SH52Z AM2DS-1212SH52Z AM2DS-1215SH52Z AM2DS-1503SH52Z AM2DS-1505SH52Z AM2DS-1509SH52Z AM2DS-1512SH52Z AM2DS-1515SH52Z AM2DS-2403SH52Z AM2DS-2405SH52Z AM2DS-2409SH52Z AM2DS-2412SH52Z AM2DS-2415SH52Z Input Voltage (V) Output Voltage (V) Output Current Max (mA) Max Capacitive Load (uF) Efficiency (%) 5 5 5 5 5 12 12 12 12 12 15 15 15 15 15 24 24 24 24 24 3.3 5 9 12 15 3.3 5 9 12 15 3.3 5 9 12 15 3.3 5 9 12 15 500 400 222 167 133 500 400 222 167 133 500 400 222 167 133 500 400 222 167 133 1000 470 470 220 220 1000 470 470 220 220 1000 470 470 220 220 1000 470 470 220 220 76 79 83 84 85 74 79 82 82 83 74 78 81 82 83 73 78 81 81 81 Output Voltage (V) ±5 ±9 ±12 ±15 +15/-9 ±5 ±9 ±12 ±15 +15/-9 ±5 ±9 ±12 ±15 +15/-9 ±5 ±9 ±12 ±15 +15/-9 Output Current max (mA) ±200 ±111 ±83.3 ±66.7 +67/-111 ±200 ±111 ±83.3 ±67 +67/-111 ±200 ±111 ±83.3 ±66.7 +67/-111 ±200 ±111 ±83.3 ±66.7 +67/-111 Max Capacitive Load (uF) ±220 ±220 ±100 ±100 +100/-220 ±220 ±220 ±100 ±100 +100/-220 ±220 ±220 ±100 ±100 +100/-220 ±220 ±220 ±100 ±100 +100/-220 Efficiency (%) 79 82 83 84 83 79 81 83 83 80 79 81 83 82 81 79 80 81 82 80 Models Dual output Model AM2DS-0505DH52Z AM2DS-0509DH52Z AM2DS-0512DH52Z AM2DS-0515DH52Z AM2DS-051509DH52Z AM2DS-1205DH52Z AM2DS-1209DH52Z AM2DS-1212DH52Z AM2DS-1215DH52Z AM2DS-121509DH52Z AM2DS-1505DH52Z AM2DS-1509DH52Z AM2DS-1512DH52Z AM2DS-1515DH52Z AM2DS-151509DH52Z AM2DS-2405DH52Z AM2DS-2409DH52Z AM2DS-2412DH52Z AM2DS-2415DH52Z AM2DS-241509DH52Z www.aimtec.com F 051e R6.C Rev: 09/21/A Input Voltage (V) 5 5 5 5 5 12 12 12 12 12 15 15 15 15 15 24 24 24 24 24 Tel: +1 514 620 2722 1 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2DS-Z 2 Watt | DC-DC Converter Input Specifications Parameters Voltage range Filter Startup time Absolute Maximum Rating (1sec max) Quiescent Current Input Reflected Ripple current Nominal Typical 5 12 15 24 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 Maximum Units VDC Capacitor Vnom, constant resistive load 5 Vin 12 Vin 15 Vin 24 Vin 5 Vin 12 Vin 15 Vin 24 Vin See the suggested circuit 20 Conditions Typical ms 0-9 0-18 0-20 0-30 40 30 25 20 20 VDC mA mA p-p Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance 60 sec Rated Units 5200 VDC MOhm pF Maximum Units ±5 % ±1.2 ±12 ±10 150 % % % % %/°C mV p-p Maximum Units 95 KHz °C °C °C >1000 7 Output Specifications Parameters Voltage accuracy Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation Cross regulation Temperature coefficient Ripple and Noise* Conditions Typical Continuous Auto recovery For 1% change of V in 20 to 100% load, 5Vin, 3.3V/5V single output models 20 to 100% load 25-100% load on 1st output, 100% load on 2nd output ±5 ±0.03 20MHz Bandwidth *Output ripple and noise are measured with external connection of 10uF electrolytic capacitor and 1uF ceramic capacitor. General Specifications Parameters Conditions Typical Switching frequency Operating temperature Storage temperature Maximum case temperature Cooling Humidity Case material Soldering temperature Weight Dimensions (L x W x H) MTBF Manual soldering temperature 100% load, depending of the model With derating above 65°C 50 - 100 -40 to +95 -55 to +125 Free air convection 95 Non-conductive black plastic, epoxy encapsulated (UL94V-0 rated) 1.5mm from case for 10 sec. 260 2.7 0.76 x 0.28 x 0.39 inches 19.5 x 7.2 x 10.0 mm >3 300 000 hrs (MIL-HDBK-217 F at +25 °C) 1.5mm from case for 10sec 260 % RH °C g °C NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity