AM2DS-1515D-NZ

Click on Series name for product info on aimtec.com Series AM2DS-NZ 2 Watt | DC-DC Converter FEATURES: • Unregulated • High efficiency up to 86% • 7 pin SIP package • • • Operating temperature -40°C to + 105°C 1500 & 3000VDC Isolation Continuous short circuit protection except with models marked with ‡ Models Single output Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Cap Load (µF) Efficiency (%) AM2DS-0503S-NZ AM2DS-0505S-NZ AM2DS-0509S-NZ AM2DS-0512S-NZ AM2DS-0515S-NZ AM2DS-0524S-NZ ‡ AM2DS-1203S-NZ ‡ AM2DS-1205S-NZ ‡ AM2DS-1209S-NZ ‡ AM2DS-1212S-NZ ‡ AM2DS-1215S-NZ ‡ AM2DS-1224S-NZ ‡ AM2DS-2403S-NZ ‡ AM2DS-2405S-NZ ‡ AM2DS-2412S-NZ ‡ AM2DS-2415S-NZ ‡ AM2DS-2424S-NZ ‡ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 9 12 15 24 3.3 5 9 12 15 24 3.3 5 12 15 24 400 400 222 167 133 83 400 400 222 167 133 83 400 400 167 133 83 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 79 84 79 84 84 84 79 82 81 84 85 86 79 80 84 86 86 AM2DS-0505SH30-NZ AM2DS-0512SH30-NZ AM2DS-0515SH30-NZ AM2DS-0524SH30-NZ ‡ AM2DS-1205SH30-NZ ‡ AM2DS-1212SH30-NZ ‡ AM2DS-1215SH30-NZ ‡ AM2DS-2405SH30-NZ ‡ AM2DS-2409SH30-NZ ‡ AM2DS-2412SH30-NZ ‡ AM2DS-2415SH30-NZ ‡ AM2DS-2424SH30-NZ ‡ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 5 12 15 24 5 12 15 5 9 12 15 24 400 167 133 83 400 167 133 400 222 167 133 83 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 220 220 220 220 220 220 220 220 220 220 220 220 82 82 83 84 82 84 85 80 86 84 86 86 Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Cap Load (µF) Efficiency (%) 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 ±5 ±9 ±12 ±15 ±24 ±5 ±9 ±12 ±15 ±15 ±200 ±111 ±83 ±67 ±42 ±200 ±111 ±83 ±67 ±67 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 100 100 100 100 100 100 100 100 100 100 80 84 84 82 84 80 82 84 84 81 Model Models Dual output Model AM2DS-0505D-NZ AM2DS-0509D-NZ AM2DS-0512D-NZ AM2DS-0515D-NZ AM2DS-0524D-NZ ‡ AM2DS-1205D-NZ ‡ AM2DS-1209D-NZ ‡ AM2DS-1212D-NZ ‡ AM2DS-1215D-NZ ‡ AM2DS-1515D-NZ ‡ www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.C REV: 07/21/A 1 of 5 North America only Series AM2DS-NZ 2 Watt | DC-DC Converter AM2DS-2405D-NZ AM2DS-2409D-NZ AM2DS-2412D-NZ AM2DS-2415D-NZ ‡ ‡ ‡ ‡ AM2DS-0505DH30-NZ AM2DS-0509DH30-NZ AM2DS-0512DH30-NZ AM2DS-0515DH30-NZ AM2DS-0524DH30-NZ ‡ AM2DS-1205DH30-NZ ‡ AM2DS-1209DH30-NZ ‡ AM2DS-1212DH30-NZ ‡ AM2DS-1215DH30-NZ ‡ AM2DS-2405DH30-NZ ‡ AM2DS-2409DH30-NZ ‡ AM2DS-2412DH30-NZ ‡ AM2DS-2415DH30-NZ ‡ 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 ±5 ±9 ±12 ±15 ±200 ±111 ±83 ±67 1500 1500 1500 1500 100 100 100 100 80 86 84 84 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 ±5 ±9 ±12 ±15 ±24 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±200 ±111 ±83 ±67 ±42 ±200 ±111 ±83 ±67 ±200 ±111 ±83 ±67 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 100 100 100 100 100 100 100 100 100 100 100 100 100 80 84 83 82 84 80 82 84 84 80 84 84 84 ‡ With Momentary short circuit protection of 1 second NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity 1000 20 Conditions Typical Rated Units 1500, 3000 VDC MOhm pF Maximum Units Output Specifications Parameters Voltage accuracy Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise www.aimtec.com (see tolerance chart) ±5 Continuous, unless marked with ‡ Auto recovery For ±1.0% change of Vin, 3.3Vout models For ±1.0% change of Vin, Others 10~100% load, 3.3V output models 18 10~100% load, 5V output models 12 10~100% load, 9V output models 9 10~100% load, 12V output models 8 10~100% load, 15V output models 7 10~100% load, 24V output models 6 20MHz Bandwidth Tel: +1 514 620 2722 75 % ±1.5 ±1.2 ±0.03 200 % of Vin % of Vin % % % % % % %/oC mV p-p Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.C REV: 07/21/A 2 of 5 North America only Series AM2DS-NZ 2 Watt | DC-DC Converter General Specifications Parameters Conditions Typical Switching frequency Operating temperature Storage temperature Humidity Case material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Maximum case temperature Cooling 100% load Derating Above 85oC 100 -40 to +105 -55 to +125 Maximum 95 Non-conductive black plastic (UL94V-0 rated) 2.4 0.77 x 0.28 x 0.40inches 19.65 x 7.05 x 10.16mm >3,500,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) 1.5 mm from case for 10sec 300 130 Free air convection Units KHz o C oC % RH g o C oC Safety Specifications Parameters Agency approvals Standards cULus (without 15V input and without 3.3V output models) UL 60950-1 EMI - Conducted and radiated emission CISPR32 / EN55032, class B (with the recommended EMC circuit) Electrostatic Discharge Immunity IEC 61000-4-2, Contact ±6KV for dual output models, Criteria B IEC 61000-4-2, Contact ±8KV for single output models, Criteria B Pin Out Specifications Pin 1500 VDC Single + V Input - V Input - V Output No pin + V Output No pin 1 2 4 5 6 7 3000VDC Dual + V Input - V Input - V Output Common + V Output No pin Single + V Input - V Input No pin - V Output No pin + V Output Dual + V Input - V Input No pin - V Output Common + V Output Dimensions 19.65 (0.77) 7.05 (0.28) PRINTED FACE 9.66 (0.38) 0.50 (0.02) 10.16 (0.40) 2.54 (0.10) 4.10 (0.16) 15.24 (0.60) 0.50 (0.02) 7.05 (0.28) 0.90 (0.04) www.aimtec.com 0.50 (0.02) 2.21±0.5 (0.087±0.02) NOTE: Unit: mm [inch] Pin tolerances: ±0.10mm [0.004inch] General tolerances: ±0.25mm [0.010inch] 0.30 (0.01) Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.C REV: 07/21/A 3 of 5 North America only Series AM2DS-NZ 2 Watt | DC-DC Converter Typical characteristics 3.3VDC output models Other models Tolerance Envelope Graph Tolerance Envelope Graph +10% +10% +5% +5% Nominal Voltage +2.5% Nominal Voltage +1% Output Voltage (%) Output Voltage (%) -2.5% -5% -7.5% -15% 10% 50% -7.5% 10% 100% 50% 100% Output Current (%) Output Current (%) Recommended Circuit for EMI Class B + Vin C1 4.7uF/ 50V LDM 6.8uH C2 4.7uF/ 50V +Vout DC Vin Cout DC - Vin 5 9 12 15 24 - Vin CY C2 10µF 2.2µF 1µF 1µF CY For 3KVDC isolation 1nF/3KV Cout Refer to C2/C3 in Typical Application Circuit Single Typical Application Circuit Capacitor selection Table Vin C1 Single VDC 5 4.7µF 3.3 / 5V 12 2.2µF 9 / 12V 15 2.2µF 15V 24 1µF 24V CY For 1.5KVDC isolation 1nF/2KV Vin+ Dual VDC ±3.3 / ±5V ±9 / ±12V ±15V ±24V C2/C3 4.7 µF 1 µF 0.47 µF 0.47 µF 1) Ensure output load of Min 10%, or specifications may not be met 2) Under normal operation, there is no protection for overload condition 3) Converter may exhibit start up delay if capacitive load exceeds recommended 4) Ceramic or electrolytic type capacitors are recommended, tantalum type may damage converter 5) Parallel connections, or hot swapping is not recommended Vo+ C2 C1 VinVo- Dual Vin+ Vo+ C2 Com C1 C3 Vin- Vo- Derating www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 051e R12.C REV: 07/21/A 4 of 5 North America only Series AM2DS-NZ 2 Watt | DC-DC Converter Free Air Convection 85º C Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 80 85 105 100 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity