AM2GH-4805SZ

Click on Series name for product info on aimtec.com Series AM2GH-Z 2 Watt | DC-DC Converter FEATURES: • • • • • • • • SIP8 Package Low Ripple and Noise Continuous Short Circuit Protection -40ºC to +85ºC Operating Temperature Range Ultra-Wide Input Range 4:1 1600 VDC I/O Isolation Efficiency up to 79% Remote ON/OFF Control Models Single output Model Input Voltage (V) Output Voltage (V) Output Current Max (mA) Maximum Capacitive Load (µF) AM2GH-1203SZ AM2GH-1205SZ AM2GH-1212SZ AM2GH-1215SZ AM2GH-2403SZ AM2GH-2405SZ AM2GH-2412SZ AM2GH-2415SZ AM2GH-4803SZ AM2GH-4805SZ AM2GH-4812SZ AM2GH-4815SZ 4.5-18 4.5-18 4.5-18 4.5-18 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 500 400 167 133 500 400 167 133 500 400 167 133 1000 1000 220 100 1000 1000 220 100 1000 1000 220 100 Input Voltage (V) Output Voltage (V) Output Current Max (mA) Maximum Capacitive Load (µF) Input Current Full Load | No Load (mA) 196 225 213 213 96 106 105 105 47 55 55 54 Efficiency (%) 40 40 40 40 25 20 30 30 10 15 15 15 70 74 78 78 71 78 79 79 72 75 75 76 Models Dual output Model Input Current Full Load | No Load (mA) Efficiency (%) AM2GH-1205DZ 4.5-18 ±5 ±200 ±470 219 30 77 AM2GH-1212DZ 4.5-18 ±12 ±83 ±100 213 30 78 AM2GH-1215DZ 4.5-18 ±15 ±66 ±47 216 40 77 AM2GH-2405DZ 9-36 ±5 ±200 ±470 111 30 75 AM2GH-2412DZ 9-36 ±12 ±83 ±100 108 30 77 AM2GH-2415DZ 9-36 ±15 ±66 ±47 106 30 78 AM2GH-4805DZ 18-75 ±5 ±200 ±470 56 15 74 AM2GH-4812DZ 18-75 ±12 ±83 ±100 56 15 74 AM2GH-4815DZ 18-75 ±15 ±66 ±47 55 15 75 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity1000 200 Output Specifications Parameters Voltage accuracy Cross Regulation (Dual Output) Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise * Conditions Typical 25% load on 1st output - 100% load on 2nd load ±5 Continuous Auto-Recovery 0% to 100% load for single output models 10% to 100% load for dual output models ±0.02 20MHz Bandwidth * Measured with a 1µF CC. General Specifications Parameters Conditions Typical Switching frequency Operating temperature Storage temperature Maximum case temperature Derating Cooling Humidity Case material Potting Material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Transient recovery time Transient recovery deviation 100% load 100 -40 to 85 -40 to +125 100 Above 71°C 5 Free Air Convection 95 Non conductive black plastic Silicon (UL94V-0 rated) 4.5 0.86 x 0.36 x 0.44 inches 21.85 x 9.20 x 11.10 mm >1,700,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25°C)hours 1.5mm from case for 10 second 260 25% load step change, 25% to 100% 250 25% load step change, 25% to 100% ±3 KHz °C °C °C %/ °C % RH g °C uS % Safety Specifications Parameter Agency Approvals Standards www.aimtec.com F 051e R12.E Rev: 09/21/A CE Designed to meet IEC60950-1, 62368-1 EN55032 , Class A with the recommended circuit IEC61000-4-2, Perf. Criteria A IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria A (external 220uF/100V cap required) IEC61000-4-5, Perf. Criteria A (external 220uF/100V cap required) IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf, Criteria A Tel: +1 514 620 2722 2 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2GH-Z 2 Watt | DC-DC Converter Dimensions Printed face Pin 10.60 (0.42) 2 3 5 6 7 8 3.00 (0.12) 0.50 (0.02) 1 Single 1 - V Input 2 + V Input 3 On/Off Control 5 N.C. 6 + V Output 7 - V Output 8 N.C. NC: Not Connected Dual - V Input + V Input On/Off Control N.C. + V Output Common - V Output 0.50 (0.02) 3.20 (0.13) 21.85 (0.86) 3 5 6 7 8 0.25 (0.01) 2 9.20 (0.36) Bottom View 1 2.54 (0.1) Note: Unit: mm(inch) Pin pitch and length tolerance: ±0.35mm (±0.014) Case tolerance: ±0.50mm (±0.02) 0.50 (0.02) 17.78 (0.7) Derating Free Air Convection 71º C Output Power (%) 100 80 Safe Operating Area 60 40 30 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C www.aimtec.com F 051e R12.E Rev: 09/21/A Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2GH-Z 2 Watt | DC-DC Converter Control ON/OFF pin connection example VCC (VDC) R1 (KΩ) R2(KΩ) ZD1(V , mA) 4.5 -18 9 - 36 18 - 75 7.5 18 33 0 2.2 6.8 10, 5 18, 5 36, 5 Recommended Circuits Conducted and Radiated Emissions L +V output +V input DC/DC Converter C1 -V input Load Input Voltage (V) 12 24 48 C1 (uF/V) 10/35 2.2/100 2.2/100 L(uH) 2.5 10 18 -V output EFT / Surge +V output +V input DC/DC Converter C2 Load 220uF /100V -V input www.aimtec.com F 051e R12.E Rev: 09/21/A -V output Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2GH-Z 2 Watt | DC-DC Converter Typical Efficiency Example Charts AM2GH-1205Z Efficiency vs. Loading 100 Eff % 90 80 70 60 50 40 20% 40% 60% Loading % 80% 100% AM2GH-2409Z Efficiency vs. Loading 100 Eff % 90 80 70 60 50 40 20% 40% 60% Loading % 80% 100% AM2GH-4805Z Efficiency vs. Loading 100 Eff % 90 80 70 60 50 40 20% 40% 60% Loading % 80% 100% NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity