AM30CW-4805SZ

Click on Series name for product info on aimtec.com Series AM30CW-Z 30 Watt | DC-DC Converter FEATURES: • Ultra-compact footprint 1”x1” • Ultra-wide Input Range 4:1 • 1600 VDC Isolation • Remote ON/OFF Function • Input Under Voltage lockout • Continuous Short circuit protection • • • • • • Adjustable Output Voltage Operating Temperature -40ºC to +100ºC Over Current and Over Voltage Protection Efficiency up to 92% Over Temperature Protection Soft Start Models: Single output Model Input Voltage (V) AM30CW-2403SZ AM30CW-2405SZ AM30CW-2412SZ AM30CW-2415SZ AM30CW-4803SZ AM30CW-4805SZ AM30CW-4812SZ AM30CW-4815SZ 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 Output Voltage (V) Output Current max (A) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) 7 6 2.5 2 7 6 2.5 2 1600 1600 1600 1600 1600 1600 1600 1600 10,000 7200 1200 1000 10,000 7200 1200 1000 88 89 89 91 89 90 90 92 Output Current max (A) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) 1600 1600 1600 1600 ±750 ±500 ±750 ±500 89 91 90 91 3.3 5 12 15 3.3 5 12 15 Models: Dual output Model Input Voltage (V) Output Voltage (V) AM30CW-2412DZ 9-36 ±12 AM30CW-2415DZ 9-36 ±15 AM30CW-4812DZ 18-75 ±12 AM30CW-4815DZ 18-75 ±15 *Add suffix “-K” for optional heatsink preinstalled models. ±1.25 ±1 ±1.25 ±1 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity1000 2000 Tel: +1 514 620 2722 1 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM30CW-Z 30 Watt | DC-DC Converter Output Specifications Parameters Conditions Typical Voltage accuracy Cross Regulation (Dual Output Models) Over voltage protection Over current protection Short Circuit protection Over temperature protection Line voltage regulation Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Ripple & Noise* Voltage adjustment range Transient recovery time 25% load on one output - 100% load on second load Zener Diode Clamp Full Load Hiccup, Auto-Recovery Case temperature HL-LL 0% to 100% load 0% to 100% balanced load Maximum % ±5 % 120 170 % % Continuous 115 ±0.5 ±0.5 ±1 ±0.02 75 ±10 250 20MHz Bandwidth, full load Trim - Single output models only 25% load step change 25% load step change, 3.3V output Transient recovery deviation 25% load step change, Others *Measured with 1µF/25V MLCC on each output. Units ±1 oC % % % %/oC mV p-p % µs ±5 ±3 % General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Conditions Typical 100% load, 3.3V & 5V output 100% load, others With derating above +55°C -55 to +125 Maximum 270 330 Units KHz oC -40 to +100 oC 105 oC 95 % RH Free air convection Copper Without Heatsink 19 g With Heatsink 21.9 Without Heatsink 1.00 x 1.00 x 0.41 inches 25.40 x 25.40 x 10.40 mm With Heatsink 1.00 x 1.00 x 0.66 inches 25.40 x 25.40 x 16.80 mm > 370,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) oC 1.5mm from case for 10 sec 260 Safety Specifications Parameters Agency approvals Standards www.aimtec.com F 051e R15 REV: 03/20/A CE, cULus UL60950-1, UL62368-1 EN55032, Class A, with external EMI filter IEC 61000-4-2, Criteria A IEC 61000-4-3, Criteria A IEC 61000-4-4, Criteria A, with external filter IEC 61000-4-5, Criteria A, with external filter IEC 61000-4-6, Criteria A IEC 61000-4-8, Criteria A Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM30CW-Z 30 Watt | DC-DC Converter Derating Trimming Free Air Convection Without heatsink Output Power (%) 100 With heatsink 80 Safe Operating Area 60 50 40 20 0 - 40 - 20 0 20 40 55 60 85 80 100 Ambient Temperature º C Pin Out Specifications Bottom View 25.40 (1.00) 10.16 2.54 (0.40) (0.10) 10.16 (0.40) 4 6 2 3 Side View 5.08 7.62 (0.20) (0.30) 10.16 (0.40) ᴓ 1.00 (0.39) NOTE: All dimensions are typical in millimeters (inches). 1. Pin diameter tolerance: ±0.05 (±0.002) 2. Pin pitch and length tolerance: ±0.35 (±0.014) 3. Case Tolerance: ±0.5 (±0.02) 6.00 (0.24) 10.40 (0.41) 0.50 (0.02) Printed Face 2.54 (0.10) 1 2.54 (0.10) 20.32 (0.80) 5 2.54 (0.10) 2.54 (0.10) Top View 2.54 (0.10) 1 2 3 4 5 6 Dimensions Dual + V input - V input On/Off Control + V output Common - V output 25.40 (1.00) Pin Single + V input - V input On/Off Control + V output Trim - V output Dimensions for optional -K models 10.16 (0.40) 10.16 2.54 (0.40) (0.10) 5 4 6 1 2 3 2.54 (0.10) ᴓ 1.00 (0.39) 2.54 (0.10) 2.54 (0.10) 6.00 (0.24) 20.32 (0.80) 0.50 (0.02) 16.80 (0.66) Side View 2.54 (0.10) 2.54 (0.10) Bottom View NOTE: All dimensions are typical in millimeters (inches). 1. Pin diameter tolerance: ±0.05 (±0.002) 2. Pin pitch and length tolerance: ±0.35 (±0.014) 3. Case Tolerance: ±0.5 (±0.02) 7.62 (0.30) 10.16 (0.40) 5.08 (0.20) www.aimtec.com F 051e R15 REV: 03/20/A Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM30CW-Z 30 Watt | DC-DC Converter Recommended Application Circuits Conducted Emissions L +V output +V input C1 DC/DC Converter -V input Load Input Voltage C1 L 24V 48V 3.3µF/50V 1µF/100V 0.82µH 2.2µH -V output EFT/Surge Circuit recommendation +Vout +Vin DC/DC Converter + C1 D1 Vin Load 24V 48V C1 D1 330 µF / 100V TVS 58V, 3KW TVS 120V, 3KW -Vin -Vout C1 : Nippon chemi-con KY series NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity