AM30EW-2405SZ

Click on Series name for product info on aimtec.com Series AM30EW-Z 30 Watt | DC-DC Converter FEATURES: • • • • • • • • Ultra Wide 4:1 input range Efficiency up to 91% Soft start Continuous short circuit protection Remote on/off control Input/Output Isolation 1600VDC Operating temperature -40ºC to + 75ºC RoHS compliant Models Single output Model Input Voltage (V) Output Voltage (V) Output Current max (A) Maximum Capacitive Load (uF) Efficiency (%) 3.3 5 5.1 12 15 3.3 5 5.1 12 15 7.5 6 6 2.5 2 7.5 6 6 2.5 2 20000 14000 14000 2000 2000 20000 14000 14000 2000 2000 89 90 90 89 89 89 90 90 90 91 Output Voltage (V) Output Current max (A) Maximum Capacitive Load (uF) Efficiency (%) ±5 ±12 ±15 ±5 ±12 ±15 ±3 ±1.25 ±1 ±3 ±1.25 ±1 ±3000 ±1300 ±1300 ±3000 ±1300 ±1300 89 89 89 90 89 89 AM30EW-2403SZ 9-36 AM30EW-2405SZ 9-36 AM30EW-2405.1SZ 9-36 AM30EW-2412SZ 9-36 AM30EW-2415SZ 9-36 AM30EW-4803SZ 18-75 AM30EW-4805SZ 18-75 AM30EW-4805.1SZ 18-75 AM30EW-4812SZ 18-75 AM30EW-4815SZ 18-75 Add suffix “-K” for optional heat sink Models Dual output Model Input Voltage (V) AM30EW-2405DZ 9-36 AM30EW-2412DZ 9-36 AM30EW-2415DZ 9-36 AM30EW-4805DZ 18-75 AM30EW-4812DZ 18-75 AM30EW-4815DZ 18-75 Add suffix “-K” for optional heat sink Models Triple output Model Input Voltage (V) AM30EW-240312TZ 9-36 AM30EW-240315TZ 9-36 AM30EW-240512TZ 9-36 AM30EW-240515TZ 9-36 AM30EW-480312TZ 18-75 AM30EW-480315TZ 18-75 AM30EW-480512TZ 18-75 AM30EW-480515TZ 18-75 Add suffix “-K” for optional heat sink Output Voltage (V) Output Auxiliary Voltage (V) Output Current max (A) Maximum Capacitive Load (uF) Efficiency (%) 3.3 3.3 5 5 3.3 3.3 5 5 ±12 ±15 ±12 ±15 ±12 ±15 ±12 ±15 5 / ±0.42 5 / ±0.33 4 / ±0.42 4 / ±0.33 5 / ±0.42 5 / ±0.33 4 / ±0.42 4 / ±0.33 15000 / ±220 15000 / ±220 8000 / ±220 8000 / ±220 15000 / ±220 15000 / ±220 8000 / ±220 8000 / ±220 88 88 89 89 89 88 90 90 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity320 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25ºC) 1.5mm from case for 10 sec 260 25% load step change 250 25% load step change ±3 g °C uS % Safety Specifications Parameters Agency Approval CE EN55032 Class A, with the recommended circuit IEC61000-4-2, Perf. Criteria A IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria A (external 220uF/100V cap required) IEC61000-4-5, Perf. Criteria A (external 220uF/100V cap required) IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A Standards Pin Out Specifications Pin 1 2 3 4 5 6 7 Single + V Input - V Input On/Off Control + V Output -V Output Trim No Pin Dual + V Input - V Input On/Off Control + V Output Common - V Output No Pin Triple + V Input - V Input On/Off Control + Vaux Output - Vaux Output Common + V Output Dimensions Stand off Ø1.00 (0.04) 5.08 (0.2) 5.08 (0.2) 50.80 (2.0) 2.54 (0.1) 10.16 (0.4) Single and Dual Output Models 5.08 (0.2) 4 1 6 2.54 (0.1) 2.54 (0.1) 10.16 (0.4) 10.16 (0.4) F 051e R11.K REV: 11/21/A 5 3 10.16 (0.4) All dimensions are typical: millimeters (inches) Pin Diameter: 1.0 ± 0.05 (0.04 ± 0.002) Pin Pitch tolerance: ± 0.35 (±0.014) Case tolerance: ± 0.5 (±0.02) Stand off tolerance: ± 0.1 (±0.004) 0.50 (0.02) 6.00 (0.24) www.aimtec.com Bottom View 2.54 (0.1) 25.40 (1.0) 2 Tel: +1 514 620 2722 3 of 6 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM30EW-Z 30 Watt | DC-DC Converter Stand off Ø1.00 (0.04) 10.16 (0.2) 5.08 (0.2) 5.08 (0.2) 4 5 Bottom View 6 6.00 (0.24) 7 2.54 (0.1) 2.54 (0.1) All dimensions are typical: millimeters (inches) Pin Diameter: 1.0 ± 0.05 (0.04 ± 0.002) Pin Pitch tolerance: ± 0.35 (±0.014) Case tolerance: ± 0.5 (±0.02) Stand off tolerance: ± 0.1 (±0.004) 0.50 (0.02) 10.16 (0.4) 7.62 (0.3) 3 7.62 (0.3) 2 7.62 (0.3) 25.40 (1.0) 1 2.54 (0.1) 50.80 (2.0) 2.54 (0.1) 5.08 (0.2) Triple Output Models Dimensions with Optional Heat Sink Side 25.40 (1.0) 16.40 (0.64) 50.80 (2.0) Notes: Add “-K” suffix for ordering, heat sink is affixed with thermally dissipative adhesive tape. See derating graph for temperature performance. Heat sink material is anodized (black) aluminum, adds weight 11.3g to total mass (46.3g). Derating Free Air Convection 50 ºC 100 60 ºC Output Power % Heatsink 80 60 Safe Operating Area 40 20 0 -40 -25 0 20 40 50 60 75 80 100 Ambient Temperature º C Extended temperature performance can be achieved with optional heat sink. (add suffix “–K” to part number) www.aimtec.com F 051e R11.K REV: 11/21/A Tel: +1 514 620 2722 4 of 6 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM30EW-Z 30 Watt | DC-DC Converter Trimming On/Off Control 4 +V input DC/DC Converter On/Off Control 5 6 -V input 7 Positive logic turns on the module during high logic and off during low logic. Module can be controlled by an external switch between the On/Off CTRL terminal and –Vinput terminal. The switch can be either open collector or open drain. Recommended Circuits C1 100uF, 100V L 12uH C2 1206, 470pF, 2KV Conducted/Radiated Emissions Single Output L +V output +V input C1 Conducted/Radiated Emissions Dual Output DC/DC Converter L +V output +V input C1 DC/DC Converter Load Load -V output -V input -V input -V output C2 www.aimtec.com F 051e R11.K REV: 11/21/A Load Common C2 Tel: +1 514 620 2722 5 of 6 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM30EW-Z 30 Watt | DC-DC Converter Conducted/Radiated Emissions Triple Output L +V input C1 Load +Vaux Output DC/DC Converter -Vaux Output +V output -V input Load Load Common C2 Surge/EFT C1 220uF, 100V Surge/EFT +V input 4 DC/DC Converter 5 C1 6 7 -V input NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity