AM30K-1212SZ

Click on Series name for product info on aimtec.com Series AM30K-Z 30 Watt | DC-DC Converter FEATURES: • • • • • • • • Wide Input 2:1 Range Full SMD Technology 1500 VDC Isolation Efficiency up to 91% Adjustable Output Voltage Remote ON/OFF Function Over Current, Voltage, & Temperature Protection Soft Start Models: Single output Model Input – Voltage (V) AM30K-1203SZ 9-18 AM30K-1205SZ 9-18 AM30K-1212SZ 9-18 AM30K-1215SZ 9-18 AM30K-2403SZ 18-36 AM30K-2405SZ 18-36 AM30K-2412SZ 18-36 AM30K-2415SZ 18-36 AM30K-4803SZ 36-75 AM30K-4805SZ 36-75 AM30K-4812SZ 36-75 AM30K-4815SZ 36-75 Add suffix “-K” for optional heat sink Output Voltage (V) Output Current max (A) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 5.5 5.0 2.5 2.0 5.5 5.0 2.5 2.0 5.5 5.0 2.5 2.0 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 15000 10000 2200 1000 15000 10000 2200 1000 15000 10000 2200 1000 83 86 90 90 84 87 91 91 84 87 91 91 Output Voltage (V) Output Current max (A) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) Models: Dual output Model Input – Voltage (V) AM30K-1212DZ 9-18 ±12 ±1.25 1500 ±1000 90 AM30K-1215DZ 9-18 ±15 ±1.0 1500 ±680 90 AM30K-2412DZ 18-36 ±12 ±1.25 1500 ±1000 91 AM30K-2415DZ 18-36 ±15 ±1.0 1500 ±680 91 AM30K-4812DZ 36-75 ±12 ±1.25 1500 ±1000 90 AM30K-4815DZ 36-75 ±15 ±1.0 1500 ±680 90 Add suffix “-K” for optional heat sink NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity1 000 000 hrs Calculated using MIL-HDBK-217 F at +25 °C Units KHz °C °C °C %/°C %/°C % °C g Safety Specifications Standards Agency approvals Safety www.aimtec.com F 051e R8.G Rev: 12/21/A CE IEC/EN 60950-1 EN55022 Class A with the recommended circuit EN61000-4-2 Perf. Criteria A EN61000-4-3 Perf. Criteria A EN61000-4-4 Perf. Criteria A with the recommended circuit EN61000-4-5 Perf. Criteria A with the recommended circuit EN61000-4-6 Perf. Criteria A EN61000-4-8 Perf. Criteria A Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM30K-Z 30 Watt | DC-DC Converter 45.72 (1.8) 4 5 1 2 Bottom View 6 3 7 6.00 (0.24) 10.20 (0.40) 2.54 (0.1) Stand off 10.16 (0.4) 50.80 (2.0) 10.16 (0.4) +Vin -Vin On/Off Control +Vout Com -Vout Trim 5.08 10.16 (0.2) (0.4) +Vin -Vin On/Off Control No Pin +Vout -Vout Trim 5.08 (0.2) 1 2 3 4 5 6 7 Dimensions 17.78 (0.7) Dual 10.16 (0.4) Single 5.08 (0.2) Pin 40.60 (1.6) Pin Out Specifications 2.54 (0.1) All dimensions are typical: millimeters (inches) Pin Diameter: 1.0 ± 0.05 (0.04 ± 0.002) Pin Pitch tolerance: ± 0.35 (±0.014) Case tolerance: ± 0.5 (±0.02) Dimensions with Optional Heat Sink Side 40.60 (1.6) 16.30 (0.64) 50.80 (2.0) Notes: Add “-K” suffix for ordering, heat sink is affixed with thermally dissipative adhesive tape. See derating graph for temperature performance. Heat sink material is anodized (black) aluminum, adds weight 17g to total mass (65g). Triming www.aimtec.com F 051e R8.G Rev: 12/21/A Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM30K-Z 30 Watt | DC-DC Converter Derating Free Air Convection 60 ºC 100 70 ºC Output Power % Heatsink 80 60 Safe Operating Area 40 20 0 -40 -20 0 20 40 60 70 80 85 100 Ambient Temperature º C Extended temperature performance can be achieved with optional heat sink. (add suffix “–K” to part number) Recommended Circuits Vin+ Vin- Conducted emission L Vo+ 12µH C1 330µF/ 100V C2 100µF/ 100V VoC3 Models AM30K-12XXXZ AM30K-24XXXZ AM30K-48XXXZ C1 330 μf, 100V 330 μf, 100V 330 μf, 100V L 12μH 12μH 12μH C2 100μ, 100V 100μ, 100V 100μ, 100V C3 N/A N/A 1000pF, 2000V Surge/EFT Vin+ Vo+ 1000µF/ 100V Vin- Vo- NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity