AM30SBO-4805SNZ-B

AM30SBO-NZ DC-DC Converter Preliminary Click to ORDER AM30SBO-NZ samples The AM30SBO-NZ series is a high-performance 1/16 brick DC/DC converter specifically designed for a variety of telecom applications. It features 30W of output power with no requirement for minimum load, a wide input voltage of 36-75VDC, operating temperature up to 85°C and tested I/O isolation of 1500VDC. Additionally, this series features include input under-voltage protection, output over-voltage, short-circuit, over-current and over-temperature protection, remote On/Off control, remote sense compensation and output voltage trim adjustment. The AM30SBO-NZ meets EN 62368 standards and are widely used in the industrial control, electric power instrumentation and communications. 1/16 brick package Features • • • • • • Summary High I/O Isolation 1500VDC Input under voltage protection, over temperature protection, output over voltage, over current and short circuit protection Operating Temp: -40 °C to +85 °C Low profile height: 9.18mm Compact 1/16 brick footprint and high-power density Efficiency up to 90% AM30SBO-NZ 1500 48 6000 100 125 28 85 75 36 3 1500 5 3.3 125 71 30 1000 0.25 Input voltage Output voltage (VDC) (V) Isolation (VDC) Power (W) -40 -40 Temp. range (°C) Derating (°C) Applications Training Press Release Coming Soon! IoT Product Training Video (click to open) F 052e R4 Industrial Telecom Portable Equipment Application Notes www.Aimtec.com 1 AM30SBO-NZ DC-DC Converter Preliminary Models & Specifications Single Output Model AM30SBO-4805SNZ AM30SBO-4812SNZ AM30SBO-4815SNZ AM30SBO-4824SNZ AM30SBO-4828SNZ Input Voltage (VDC) Output Voltage (VDC) Maximum Output Current (A) Maximum capacitive Load (µF) Efficiency Typ. (%) 48 (36-75) 48 (36-75) 48 (36-75) 48 (36-75) 48 (36-75) 5 12 15 24 28 6 2.5 2 1.25 1.072 7200 2000 1500 470 440 90 90 90 90 90 Input Specification Parameters Input current Filter Absolute maximum rating Input reflected ripple current Start-up voltage UVLO On/Off control Conditions Nominal input voltage, full load /no load Capacitor filter Maximum duration 1s Typical Maximum Units 695/6 711/15 mA >0.7 50 100 VDC mA VDC VDC 36 29 On Off Idle current Control pin open or 3.5-12VDC Control pin short to –Vin or 0-1.2VDC 6 10 mA Isolation Specification Parameters Tested I/O voltage Resistance Capacitance Conditions Typical Maximum Units 60 sec, leakage ≤ 1mA 500VDC 100kHz/0.1V >1500 >1000 1000 Conditions Typical Maximum Units 5-100% load LL-HL 5-100% load ±1 ±0.2 ±0.5 Nominal input voltage, 5-100% load Nominal input voltage, 0-5% load 25% load step change 25% load step change, 5V output 25% load step change, others 100 ±3 ±0.5 ±1 ±0.03 150 5 500 ±8 ±5 ±10 5 100 % % % %/°C mV pk-pk % of Vout µs % % % % ms VDC MΩ pF Output Specification Parameters Voltage accuracy Line regulation Load regulation Temperature coefficient Ripple & Noise* Transient Recovery Time Transient Response Deviation 300 ±5 ±3 Trim Sense compensation Start-up time Nominal input voltage, constant resistance load * Ripple and Noise are measured at 20MHz bandwidth. Please refer to the application note for specific details. F 052e R4 www.Aimtec.com 2 AM30SBO-NZ DC-DC Converter Preliminary General Specifications Parameters Conditions Typical Maximum Units Switching frequency* Full load, nominal input 230 KHz Short circuit protection Continuous, auto recovery Over voltage protection ≥ 110 160 % of Vo Over current protection ≥ 110 190 % of Io Over temperature protection Surface temperature 130 °C Operating temperature With derating -40 to +85 °C Storage temperature -55 to +125 °C Cooling Free air convection or forced air convection Humidity Non-condensing >5 95 % RH Weight 12 g Dimensions (L x W x H) 1.30 x 0.90 x 0.36 inches (33.02 x 22.86 x 9.18 mm) MTBF 1 000 000 hrs (MIL-HDBK -217F, t=+25°C) / Full Load * Switching frequency reduced when load < 50%. NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity