AM3D-0512SZ

Click on Series name for product info on aimtec.com Series AM3D-Z 3 Watt | DC-DC Converter FEATURES: • • • • 7 Pin SIP Package High Efficiency up to 90% Low Profile Plastic Package RoHS Compliant • • • • Operating Temperature -40oC to +85oC Short Circuit Protection Input / Output Isolation 1000, 3000 VDC Pin Compatible With Multiple Manufacturers Models Single output Input Voltage (V) Output Voltage (V) Output Current Max (mA) Isolation (VDC) AM3D-0505SZ AM3D-0509SZ AM3D-0512SZ AM3D-0515SZ AM3D-1205SZ AM3D-1209SZ AM3D-1212SZ AM3D-1215SZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 5 9 12 15 5 9 12 15 600 333 250 200 600 333 250 200 1000 1000 1000 1000 1000 1000 1000 1000 769 714 714 714 298 287 284 278 80 70 80 80 25 25 25 20 78 84 84 84 84 87 88 90 AM3D-0505SH30Z AM3D-0509SH30Z AM3D-0512SH30Z AM3D-0515SH30Z AM3D-1205SH30Z AM3D-1209SH30Z AM3D-1212SH30Z AM3D-1215SH30Z 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 5 9 12 15 5 9 12 15 600 333 250 200 600 333 250 200 3000 3000 3000 3000 3000 3000 3000 3000 769 714 714 714 298 287 284 278 80 70 80 80 25 25 25 20 78 84 84 84 84 87 88 90 Input Voltage (V) Output Voltage (V) Output Current Max (mA) Isolation (VDC) AM3D-0505DZ AM3D-0509DZ AM3D-0512DZ AM3D-0515DZ AM3D-1205DZ AM3D-1209DZ AM3D-1212DZ AM3D-1215DZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±300 ±167 ±125 ±100 ±300 ±167 ±125 ±100 1000 1000 1000 1000 1000 1000 1000 1000 741 706 706 714 294 284 281 278 80 70 70 80 25 25 25 20 81 85 85 84 85 88 89 90 AM3D-0505DH30Z AM3D-0509DH30Z AM3D-0512DH30Z AM3D-0515DH30Z AM3D-1205DH30Z AM3D-1209DH30Z AM3D-1212DH30Z AM3D-1215DH30Z 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±300 ±167 ±125 ±100 ±300 ±167 ±125 ±100 3000 3000 3000 3000 3000 3000 3000 3000 741 706 706 714 294 284 281 278 80 70 70 80 25 25 25 20 81 85 85 84 85 88 89 90 Model Input Current Full | No Load (mA) Efficiency (%) Models Dual output Model Input Current Full | No Load (mA) Efficiency (%) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity1000 60 Conditions Typical Rated Units VDC MOhm pF Output Specifications Parameters Voltage Accuracy Line Voltage Regulation Load Voltage Regulation Temperature Coefficient Ripple & Noise * Minimum Load Current For 1.0% of Vin load 10~100%, 5Vin/5Vout models load 10~100%, other models 20MHz Bandwidth Maximum -4 to +2 ±1.2 8 7 ±0.02 50 10 Units % % of Vin % % %/°C mV p-p % of Max * Measured with a 1µF CC. General Specifications Parameters Conditions Typical Switching Frequency Operating Temperature Storage Temperature Maximum Case Temperature Cooling Humidity Case Material Weight Dimensions (L x W x H) MTBF Maximum Soldering Temperature 100% load With Derating Above 71 °C (5V input models only) 70 -40 to +85 -40 to +125 Maximum Units 100 KHz °C °C °C Free Air Convection 95 Non-conductive black plastic UL 94 V-0 2.8 0.76 x 0.28 x 0.37 inches 19.50 x 7.20 x 9.50 mm >1 800 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25°C) 1.5mm from case for 10 sec 260 % RH g °C Safety Specifications Parameters Agency Approval Standards www.aimtec.com CE EN55032, Class B with the recommended circuit IEC61000-4-2, Perf. Criteria A IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria A (external 220uF/100V cap required) IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A Tel: +1 514 620 2722 F 051e R12.D Rev: 11/21/A 2 of 6 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3D-Z 3 Watt | DC-DC Converter Pin Out Specifications Pin 1 2 4 5 6 7 1000Vdc Single Dual + V Input + V Input - V Input - V Input - V Output - V Output No pin Common + V Output + V Output No pin No pin 3000Vdc Single Dual + V Input + V Input - V Input - V Input No pin No pin - V Output - V Output No pin Common + V Output + V Output Dimensions 19.50 (0.76) 7.20 (0.28) PRINTED FACE 10.00 (0.39) 0.50 (0.02) 9.50 (0.37) 3.00 (0.12) 2.54 (0.10) 15.24 (0.60) 0.50 (0.02) 7.20 (0.28) 0.50 (0.02) NOTE: Unit:mm [inch] Pin Diameter: 0.50 ± 0.05mm [0.02 ± 0.002 inch] Pin Pitch tolerance: ±0.35mm [ ±0.014 inch] Case tolerance: ±0.50mm [ ±0.02 inch] 0.25 (0.01) 1.25 (0.05) Derating 5V input models only www.aimtec.com Tel: +1 514 620 2722 F 051e R12.D Rev: 11/21/A 3 of 6 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3D-Z 3 Watt | DC-DC Converter Free Air Convection 71º C Output Power (%) 100 80 Safe Operating Area 60 50 40 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C Conducted Emissions Vin+ + C1 Vin- Model 5 Vin 12 Vin Vo+ Aimtec DC-DC Converter - Load L1 Vo- C1 1210 2.2µF / 100V 1210 2.2µF / 100V L1 18 µH 18 µH EFT Vin+ + Vin- Vo+ C1 220 µF / 100V - Load Aimtec DC-DC Converter Vo- Typical Efficiency Example Charts www.aimtec.com Tel: +1 514 620 2722 F 051e R12.D Rev: 11/21/A 4 of 6 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3D-Z 3 Watt | DC-DC Converter Eff % AM3D-0509SZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 20% 40% 60% 80% 100% Loading % Eff % AM3D-1205SZ Efficiency vs. Loading 100 90 80 70 60 50 40 30 20 10 0 20% 40% 60% 80% 100% Loading % www.aimtec.com Tel: +1 514 620 2722 F 051e R12.D Rev: 11/21/A 5 of 6 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3D-Z 3 Watt | DC-DC Converter NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity