AM3D-Z

Series AM3D-Z 3 Watt | DC-DC Converter FEATURES: • • • • 7 pin SIP package High efficiency up to 90% Low profile plastic package RoHS compliant • • • • Operating temperature -40oC to + 85oC Short circuit protection Input / Output Isolation 1000, 3000 VDC Pin compatible with multiple manufacturers Models Single output Model AM3D-0505SZ AM3D-0509SZ AM3D-0512SZ AM3D-0515SZ AM3D-1205SZ AM3D-1209SZ AM3D-1212SZ AM3D-1215SZ AM3D-0505SH30Z AM3D-0509SH30Z AM3D-0512SH30Z AM3D-0515SH30Z AM3D-1205SH30Z AM3D-1209SH30Z AM3D-1212SH30Z AM3D-1215SH30Z Input Voltage (V) 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 Output Voltage (V) 5 9 12 15 5 9 12 15 5 9 12 15 5 9 12 15 Output Current max (mA) 600 333 250 200 600 333 250 200 600 333 250 200 600 333 250 200 Isolation (VDC) 1000 1000 1000 1000 1000 1000 1000 1000 3000 3000 3000 3000 3000 3000 3000 3000 Efficiency (%) 80 81 82 84 84 86 89 90 80 81 82 84 84 86 89 90 Models Dual output Model AM3D-0505DZ AM3D-0509DZ AM3D-0512DZ AM3D-0515DZ AM3D-1205DZ AM3D-1209DZ AM3D-1212DZ AM3D-1215DZ AM3D-0505DH30Z AM3D-0509DH30Z AM3D-0512DH30Z AM3D-0515DH30Z AM3D-1205DH30Z AM3D-1209DH30Z AM3D-1212DH30Z AM3D-1215DH30Z Input Voltage (V) 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 Output Voltage (V) ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 Output Current max (mA) ±300 ±167 ±125 ±100 ±300 ±167 ±125 ±100 ±300 ±167 ±125 ±100 ±300 ±167 ±125 ±100 Isolation (VDC) 1000 1000 1000 1000 1000 1000 1000 1000 3000 3000 3000 3000 3000 3000 3000 3000 Efficiency (%) 82 83 84 86 85 86 89 90 82 83 84 86 85 86 89 90 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity1000 60 Rated Units VDC MOhm pF Output Specifications Parameters Voltage accuracy Line voltage regulation Load voltage regulation Temperature coefficient Short Circuit Protection Ripple & Noise Minimum Load Current Conditions For 1.0% of Vin load 10~100% Typical ±3 ±1.2 ±8 ±0.02 Momentary (1sec) 50 10 Maximum Units % % of Vin % %/oC mV p-p % of Max 20MHz Bandwidth General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Derating Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Conditions 100% load With Derating Above 71 oC (5V input models only) Typical 70 -40 to +85 Maximum Units KHz o C C C %/ oC o o -40 to +125 100 Free Air Convection 95 Non-conductive black plastic UL 94 V-0 2.8 0.76 x 0.28 x 0.37 inches 19.50 x 7.20 x 9.50 mm >1 800 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) 1.5mm from case for 10 sec 260 % RH g o C Safety Specifications Parameters Standards NOTE: Designed to meet: IEC 60950-1: 2001, EN55022 (Radiated Emissions) class B, IEC61000-4-2(ESD), IEC61000-4-3(Radiated immunity) Pin Out Specifications Pin 1 2 4 5 6 1000Vdc Single Dual + V Input + V Input - V Input - V Input - V Output - V Output No pin Common + V Output + V Output 3000Vdc Single Dual + V Input + V Input - V Input - V Input No pin No pin - V Output - V Output No pin Common Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only www.aimtec.com F 051e R12.A Series AM3D-Z 3 Watt | DC-DC Converter 7 No pin No pin + V Output + V Output Dimensions Derating 5V input models only NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity