AM3O-0512SNZ

AM3O-NZ DC-DC Converter DC-DC Converter Click to ORDER AM3O-NZ samples The AM3O-NZ series is designed to offer an ultra-thin solution to customers with designs that have challenging height considerations. This series is available in both SIP and DIP packages with open frame and metal case options. The total height of 0.24iches (6.8mm) for the Dual Inline Package offers significant space optimization when compared to typical 3W DIP products with approximately twice the height (~0.4inches). In addition, the AM3O-NZ offers an impressive 500VAC or 1500VDC isolation with a 2:1 input voltage range of 4.5-9VDC or 4:1 input voltage range of 9-36VDC. It is also designed with input under-voltage protection, output over-voltage, over-current, short circuit protection, which enables the AM3O-NZ series to be used in a variety of application related to industrial control, instrumentation and communication equipment. Open frame Features • • • • • • • • Summary Wide Input Range: 4.5VDC – 36VDC Operating Temp: -40 °C to +85 °C Low ripple & noise, 50mV(p-p) typ. Efficiency up to 82% Adjustable output voltage Output short circuit, over voltage protection Optional package: DIP/SMD Regulated Output 1500 AM3O-NZ 48 6000 60 125 24 85 85 -40 -40 Temp. range (℃) Derating (℃) 1500 36 4.5 3 3.3 1.2 500 Input voltage Output voltage (VDC) (V) Isolation (VDC) 3 1.5 Power (W) Applications Training Press Release Coming Soon! Power Grid Product Training Video (click to open) F 052e R4 REV: 07/22/A Industrial Telecom Instrumentation Application Notes www.Aimtec.com 1 AM3O-NZ DC-DC Converter DC-DC Converter Models & Specifications Single Output Model Input Voltage (VDC) Output Voltage (VDC) Input Current Max (mA) No Load Full Load Output Current Max (mA) Maximum Capacitive Load (µF) Efficiency Typ. (%) Full Load AM3O-0505SNZ AM3O-0512SNZ AM3O-0515SNZ AM3O-0524SNZ 5 (4.5 ~ 9) 5 45 857 600 470 72 5 (4.5 ~ 9) 5 (4.5 ~ 9) 5 (4.5 ~ 9) 12 15 24 45 45 45 857 857 857 250 200 125 220 100 47 76 77 76 AM3O-2403SNZ AM3O-2405SNZ AM3O-2412SNZ AM3O-2415SNZ AM3O-2424SNZ 24 (9 ~ 36) 24 (9 ~ 36) 24 (9 ~ 36) 3.3 5 12 15 15 15 169 169 169 909 600 250 1000 1000 470 72 77 81 24 (9 ~ 36) 15 15 169 200 330 82 24 (9 ~ 36) 24 15 169 125 100 81 Note: Use suffix “M” for DIP package with case, suffix “L” for SMD package without case and suffix “LM” for SMD package with case (ex. AM3O0505SNZ is DIP package without case, AM3O-0505SNZ-M is DIP package with case, AM3O-0505SNZ-L is SMD package without case, AM3O0505SNZ-LM is SMD package with case version). Input Specification Parameters Voltage range Filter Absolute maximum rating Reflected ripple current Start-up voltage Under voltage protection Ctrl * Conditions Typical Maximum See models table 5V input models 24V input models 5V input models, 1 sec. max 24V input models, 1 sec. max Nominal input voltage 5V input models 24V input models 5V input models 24V input models ON OFF Shutdown current Units VDC LC filter Capacitor filter 16 50 VDC VDC 100 mA pk-pk 4.5 VDC 9 VDC 2.5 VDC 5.5 VDC Ctrl pin pulled low to GND(0~0.3VDC) Ctrl pin open or pulled high(2~12VDC) 5 10 mA * The Ctrl pin voltage is referenced to input GND. Isolation Specification Parameters Tested I/O, I/O to case voltage Resistance Capacitance F 052e R4 REV: 07/22/A Conditions Typical 60 sec, 5mA max 60 sec, 1mA max 500 1500 VAC VDC Resistance at 500VDC ≧100 MΩ I/O capacitance at 100KHz/0.1V 1000 pF www.Aimtec.com Maximum Units 2 AM3O-NZ DC-DC Converter DC-DC Converter Output Specification Parameters Voltage accuracy Line regulation Load regulation Over voltage protection Over current protection Short circuit protection Temperature coefficient Ripple & Noise* Output voltage adjustment Transient recovery time Conditions Typical Maximum Units 0 ~ 100% load Full load ±1 ± 0.2 ±2 ± 0.5 % % 5 ~ 100% load ±1 % 110~250 % Vout % Iout 110~160 160 Continuous, Auto recovery %/ oC 50 mV pk-pk ±5 % Vout 25% load step change 300 500 µS 3.3V Vout models ±5 ±10 % 25% load step change 5V Vout models ±5 ±8 % Transient response deviation Others ±3 ±5 % * Ripple and Noise are measured at 20MHz bandwidth by using a 0.1μF (M/C) and 10μF (E/C) parallel capacitor and typical input with full load Full load 20MHz bandwidth, 5 ~ 100% load ± 0.03 100 General Specifications Parameters Switching frequency Operating temperature Storage temperature Reflow soldering temperature Soldering temperature Cooling Humidity Case material Vibration Shock Weight Dimensions (L x W x H) MTBF Conditions Typical PWM mode See derating graph 330 Maximum -40 to +85 -55 to +125 Units KHz oC oC For SMD package only, peak temp ≦ 245℃, 60 sec max at 217℃, please refer to IPC/JEDEC J-STD-020D.1. oC Wave-soldering, 10 sec max 260 oC 1.5mm from case, 10 sec max 300 Free air convection (20 LFM) Non-condensing 95 % RH Aluminum alloy(Optional -M and -LM models only) 10-150Hz, 5G, 90min. along X, Y and Z 50G, 11ms once each along X, Y and Z axis Without case models 2.2 g With case models 3.5 DIP package without case models 0.95 x 0.59 x 0.24 inches, 24.00 x 15.10 x 6.19mm DIP package with case models 0.98 x 0.65 x 0.27 inches, 25.00 x 16.40 x 6.80mm SMD package without case models 1.03 x 0.59 x 0.24 inches, 26.20 x 15.10 x 6.19mm SMD package with case models 1.03 x 0.65 x 0.27 inches, 26.20 x 16.40 x 6.80mm > 1 000 000 hrs (MIL-HDBK -217F, t=+25oC) / Full Load Safety Specifications Parameters Agency approval Standards F 052e R4 REV: 07/22/A CE EN62368-1 EMC - Conducted and radiated emission Electrostatic Discharge Immunity RF, Electromagnetic Field Immunity Electrical Fast Transient/Burst Immunity Surge Immunity RF, Conducted Disturbance Immunity CISPR32/EN55032, CLASS B with recommended circuit part B IEC 61000-4-2, Contact ±6KV, Criteria B IEC 61000-4-3, 10V/m, Criteria A IEC 61000-4-4, ±2KV with recommended circuit part A, Criteria B IEC 61000-4-5, line to line ±2KV with recommended circuit part A, Criteria B IEC 61000-4-6, 3 Vr.m.s, Criteria A www.Aimtec.com 3 AM3O-NZ DC-DC Converter DC-DC Converter Note: It is suggested to connect the Y capacitor from case to input pin ground during EMC testing (with case models only) Derating 5V input model 24V input model Free air Convection Free air Convection Others model 5V output model 100 Output Power (%) Output Power (%) 100 80 60 Safe Operating Area 40 60 Safe Operating Area 40 20 20 0 - 40 80 - 20 0 20 40 60 7075 85 80 0 100 85 - 20 - 40 0 20 40 60 80 100 Ambient Temperature º C Ambient Temperature º C Typical Application Circuit +V input +V input Cin 100uF +V output + Cout 10uF DC-DC Converter -V input -V input + Load -V output EMC Recommended Circuit FUSE CY1 2200pF/ 2000Vdc LCM 2.2mH +V input C1 C2 4.7uF + 50V +V input C3 4.7uF 50V +V output C4 + + DC-DC Converter -V input A B CY2 2200pF/ 2000Vdc CY3 2200pF 2000Vdc -V input CASE Load C5 10uF -V output Fuse : Choose according to actual input current. Note: The package with case model, the case should be connected the Y capacitor to input pin GND when testing EMC performance. 5V input models: C1:2200uF/35V, C4:100uF/50V 24V input models: C1:1000uF/50V, C4:220uF/50V F 052e R4 REV: 07/22/A www.Aimtec.com 4 AM3O-NZ DC-DC Converter DC-DC Converter Dimensions AM3O- xxxx SNZ (DIP package without case) Front View 3.60 (0.14) 6.19 (0.24) Right View 0.30 (0.01) 0.60 (0.02) 22.86 (0.90) 6 2 5 1 4 5.08 (0.20) 15.10 (0.59) 3 Notes: All dimensions are typical in millimeters (inches). Pin diameter tolerances : ±0.1 (±0.004) Stand-off tolerance ±0.50 (±0.02) 24.00 (0.95) 3.74 (0.15) 2.54 (0.10) Bottom View Ø 1.10 [Ø 0.043] 1 4 2 5 3 6 Pin Out Specifications Pin Single 1 +V Input 2 Ctrl 3 -V Input 4 +V Output 5 Trim 6 -V Output Note : Grid 2.54*2.54 mm F 052e R4 REV: 07/22/A www.Aimtec.com 5 AM3O-NZ DC-DC Converter DC-DC Converter AM3O- xxxx SNZ-M (DIP package with case) Front View 3.60 (0.14) 6.80 (0.27) Right View 0.30 (0.01) 10.16 (0.40) 1.00 (0.04) 12.70 (0.50) 22.86 (0.90) 0.20 (0.01) 3.38 (0.15) 0.60 (0.02) 6 2 5 1 5.08 (0.20) 15.60 (0.61) 16.40 (0.65) 3 4 Notes: All dimensions are typical in millimeters (inches). Pin diameter tolerance : ±0.1 (±0.004) Stand-off tolerance ±0.50 (±0.02) 25.00 (0.98) 3.99 (0.16) 2.54 (0.10) Bottom View Ø 1.10 [Ø 0.043] 1 4 2 5 3 6 Pin Out Specifications Pin Single 1 +V Input 2 Ctrl 3 -V Input 4 +V Output 5 Trim 6 -V Output Ø 1.50 [Ø 0.059] Note : Grid 2.54*2.54 mm F 052e R4 REV: 07/22/A www.Aimtec.com 6 AM3O-NZ DC-DC Converter DC-DC Converter AM3O- xxxx SNZ-L (SMD package without case) Right View 26.20 (1.03) 0.60 (0.02) 0.30 (0.01) 6.19 (0.24) Front View Bottom View 6 2 5 1 4 1.82 (0.07) 5.08 (0.20) 15.10 (0.59) 3 Notes: All dimensions are typical in millimeters (inches). Pin diameter tolerances : ±0.1 (±0.004) Stand-off tolerance ±0.50 (±0.02) 24.00 (0.95) 3.74 (0.15) 2.54 (0.10) 0~10° 1 4 2 5 3 6 1.40 (0.06) 27.80 (1.09) Pin Out Specifications Pin Single 1 +V Input 2 Ctrl 3 -V Input 4 +V Output 5 Trim 6 -V Output 3.20 (0.13) Note : Grid 2.54*2.54 mm F 052e R4 REV: 07/22/A www.Aimtec.com 7 AM3O-NZ DC-DC Converter DC-DC Converter AM3O- xxxx SNZ-LM (SMD package with case) Front View 0.20 (0.01) Right View 1.00 (0.04) 14.37 (0.566) 26.20 (1.032) 0.60 (0.02) 0.80 (0.03) 3.97 (0.16) 0.30 (0.01) 11.83 (0.466) Bottom View 6 2 5 1 4 1.82 (0.07) 5.08 (0.20) 15.60 (0.61) 16.40 (6.54) 3 Notes: All dimensions are typical in millimeters (inches). Pin diameter tolerances : ±0.1 (±0.004) Stand-off tolerance ±0.50 (±0.02) 25.00 (0.98) 3.99 (0.16) 2.54 (0.10) 0~10° 1 4 2 5 3 6 Pin Out Specifications Pin Single 1 +V Input 2 Ctrl 3 -V Input 4 +V Output 5 Trim 6 -V Output 3.20 (0.13) 1.90 (0.08) 2.00 (0.08) 1.40 (0.06) 27.80 (1.09) Note : Grid 2.54*2.54 mm F 052e R4 REV: 07/22/A www.Aimtec.com 8 AM3O-NZ DC-DC Converter DC-DC Converter Trimming Output voltage can be externally trimmed by utilizing the methods as shown below Fixed Resistor Variable Potentiometer Leave open if not used. 3.3V output models Trim down % 1 2 3 4 5 Vout (VDC) 3.267 3.234 3.201 3.168 3.135 Rt down (KΩ) 121.557 79.342 57.087 43.342 34.009 Trim up % 1 2 3 4 5 Vout (VDC) 3.342 3.366 3.399 3.432 3.465 Rt up (KΩ) 4252.376 226.149 92.726 55.640 38.229 2 3 4 5 5V output models Trim down % 1 Vout (VDC) 4.950 4.900 4.850 4.800 4.750 Rt down (KΩ) 130.630 58.880 34.963 23.005 15.830 Trim up % 1 2 3 4 5 Vout (VDC) 5.050 5.100 5.150 5.200 5.250 Rt up (KΩ) 133.500 61.750 37.833 25.875 18.700 F 052e R4 REV: 07/22/A www.Aimtec.com 9 AM3O-NZ DC-DC Converter DC-DC Converter 12V output models Trim down % 1 2 3 4 5 Vout (VDC) 11.880 11.760 11.640 11.520 11.400 Rt down (KΩ) 813.735 399.920 259.338 188.540 145.897 Trim up % 1 2 3 4 5 Vout (VDC) 12.120 12.240 12.360 12.480 12.600 Rt up (KΩ) 219.089 100.320 61.504 42.238 30.724 15V output models Trim down % 1 2 3 4 5 Vout (VDC) 14.850 14.700 14.550 14.400 14.250 Rt down (KΩ) 1166.483 568.567 369.261 269.608 209.817 Trim up % 1 2 3 4 5 Vout (VDC) 15.150 15.300 15.450 15.600 15.750 Rt up (KΩ) 224.167 104.583 64.722 44.792 32.833 24V output models Trim down % 1 2 3 4 5 Vout (VDC) 23.760 23.520 23.280 23.040 22.800 Rt down (KΩ) 1645.641 917.947 628.702 473.386 376.466 Trim up % 1 2 3 4 5 Vout (VDC) 24.240 24.480 24.720 24.960 25.200 Rt up (KΩ) 361.706 136.129 78.855 52.703 37.726 NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity