AM3T-2412S-NZ

Click on Series name for product info on aimtec.com Series AM3T-NZ 3 Watt | DC-DC Converter FEATURES: • • • • • RoHS compliant 24 Pin DIP Package Shielded metal package High efficiency up to 86% Wide 2:1 input range • Operating temperature -40oC to + 85oC • Input / Output Isolation 1500VDC • Pin compatible with multiple manufacturers • Continuous short circuit protection Models Single output Model AM3T-0505S-NZ AM3T-0512S-NZ AM3T-0515S-NZ AM3T-1203S-NZ AM3T-1205S-NZ AM3T-1212S-NZ AM3T-1215S-NZ AM3T-1224S-NZ AM3T-2403S-NZ AM3T-2405S-NZ AM3T-2409S-NZ AM3T-2412S-NZ AM3T-2415S-NZ AM3T-2424S-NZ AM3T-4803S-NZ AM3T-4805S-NZ AM3T-4812S-NZ AM3T-4815S-NZ AM3T-4824S-NZ Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max. Cap. Load (µF) Efficiency (%) 4.5-9 4.5-9 4.5-9 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 36-75 5 12 15 3.3 5 12 15 24 3.3 5 9 12 15 24 3.3 5 12 15 24 600 250 200 909 600 250 200 125 909 600 333 250 200 125 909 600 250 200 125 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 4700 2700 2200 4700 4700 2700 2200 1800 4700 4700 2700 2700 2200 1800 4700 4700 2700 2200 1000 74 77 77 74 81 83 82 82 78 81 81 86 86 85 76 82 86 86 84 Models Dual output Model AM3T-0505D-NZ AM3T-0509D-NZ AM3T-0512D-NZ AM3T-0515D-NZ AM3T-1205D-NZ AM3T-1209D-NZ AM3T-1212D-NZ AM3T-1215D-NZ AM3T-2405D-NZ AM3T-2412D-NZ AM3T-2415D-NZ AM3T-4805D-NZ AM3T-4812D-NZ AM3T-4815D-NZ AM3T-4824D-NZ Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max. Cap. Load (µF) Efficiency (%) 4.5-9 4.5-9 4.5-9 4.5-9 9-18 9-18 9-18 9-18 18-36 18-36 18-36 36-75 36-75 36-75 36-75 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±5 ±12 ±15 ±5 ±12 ±15 ±24 ±300 ±166 ±125 ±100 ±300 ±166 ±125 ±100 ±300 ±125 ±100 ±300 ±125 ±100 ±63 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 ±2200 ±1800 ±1800 ±1000 ±2200 ±1800 ±1800 ±1000 ±2200 ±1800 ±1000 ±2200 ±1800 ±1000 ±680 76 76 78 78 81 84 84 85 82 84 84 82 84 85 84 NOTE: All specifications are measured at an ambient temperature of 25°C, humidity 1000 120 Conditions Typical Balanced Loads ±1 ±0.5 20MHz bandwidth 25% Load Step 25% Load Step Units VDC MOhm pF Maximum Units % % Continuous Auto-recovery ±0.2 ±0.2 ±0.03 75 0.5 ±2 % % %/oC mV p-p m sec % General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Temperature Rise Conditions Typical 100% load With derating above +85C 200 Full Load, 25oC 1.5mm from case for 10 Seconds 25oC Maximum -40 to +85 -55 to +125 100 Lead Temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF 300 Units KHz oC oC oC oC oC Free air convection 95 Black Anodized Aluminum 14 1.26 x 0.80 x 0.42 inches 32. 00 x 20.00 x 10.80mm >1 000000 hrs(MIL-HDBK -217F, Ground Benign, t=+25oC) % g Safety Specifications Parameters Agency approvals Standards www.aimtec.com F 051e R6.G cULus (AM3T-2405S-NZ and AM3T-2415S-NZ only) UL 60950-1 Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3T-NZ 3 Watt | DC-DC Converter 1500VDC Dual Single 1 2 3 9 10 11 12/13 14 15 16 22 23 24 No pin -V Input -V Input No pin No pin N.C. No pin +V Output No pin -V Output V+ Input V+ Input No pin 32.00 (1.26) No pin -V Input -V Input Common No pin -V Output No pin +V Output No pin Common +V Input +V Input No pin 23.03 (0.91) 0.50 (0.02) 2 20.00 (0.80) Pin Dimensions 3 11 9 Bottom View 23 22 16 14 2.54 (0.10) Printed Face 15.24 (0.60) Pin Out Specifications 5.08 (0.20) Built-in Stand-offs to ease PCB cleaning 4.10 (0.16) 10.80 (0.42) N.C.: not connected Filtering Single output Filtering Dual output External capacitors Vin (VDC) 5 & 12 24 & 48 Cin) (uF) 100 10-47 Cout (uF) 10 10 Recommended Circuit Single Output MOV C3 + C1 C2 DC TVS DC Load + Vin FUSE +Vout LDM LDM2 - Vin Optional Surge Circuit www.aimtec.com F 051e R6.G Optional Filter Circuit C4 Tel: +1 514 620 2722 3 of 4 - Vout Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3T-NZ Model C1 5 Vin 4.7 µF / 50V 12 Vin 4.7 µF / 50V 24 Vin 4.7 µF / 50V 48 Vin 4.7 µF / 100V Note: Fuse is user selectable C2 C4 LDM MOV TVS 4.7 µF / 50V 4.7 µF / 50V 4.7 µF / 50V 4.7 µF / 100V 1 nF /2KV 1 nF /2KV 1 nF /2KV 1 nF /2KV 12 µH 12 µH 12 µH 12 µH S14K35 S14K60 SMCJ16A SMCJ28A SMCJ48A SMCJ90A 3 Watt | DC-DC Converter C3 LDM2 680µF / 25V 680 µF / 25V 330 µF / 50V 330 µF / 100V 56 µH 56 µH Derating Free Air Convection 85º C Output Power (%) 100 80 60 Safe Operating Area 40 20 0 - 40 - 20 0 20 40 60 80 85 105 100 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity