AM40U-AZ

Series AM40U-AZ 40 Watt | DC-DC Converter FEATURES: • • • • Wide Input 2:1 Range Full Internal SMD Technology 1600 VDC Isolation Efficiency up to 89% • • • • Adjustable Output Voltage Remote ON/OFF Function Over Load, Voltage & Short Circuit Protection Operating temperature -40oC to + 85oC Models Single output Model AM40U-1203SAZ AM40U-1205SAZ AM40U-1212SAZ AM40U-1215SAZ AM40U-2403SAZ AM40U-2405SAZ AM40U-2412SAZ AM40U-2415SAZ AM40U-4803SAZ AM40U-4805SAZ AM40U-4812SAZ AM40U-4815SAZ Input Voltage (V) 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 Output Voltage (V) 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 Output Current max (A) 8 8 3.3 2.6 8 8 3.3 2.6 8 8 3.3 2.6 Isolation (VDC) 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 1600 Efficiency (%) 85 86 86 87 86 88 88 89 87 88 89 89 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity1000 220 Rated 1600 Units VDC MOhm pF Output Specifications Parameters Voltage accuracy Over voltage protection Over load protection Short Circuit protection Short circuit restart Thermal shutdown Line voltage regulation www.aimtec.com F 051e R12.B Conditions Foldback Typical ±2 Zener Diode Clamp 135~150 Continuous Auto-Restart 110 ±1 Maximum Units % % On Case ºC % of Vin Toll free: + 1 888 9 AIMTEC (924 6832) North America only Tel: +1 514 620 2722 1 of 3 Series AM40U-AZ 40 Watt | DC-DC Converter Output Specifications (continued) Parameters Load voltage regulation (Single) Temperature coefficient Ripple & Noise Voltage adjustment range Conditions Iout=10% to 100% 20MHz Bandwidth Typical ±2 ±0.02 75 ±10 Maximum Units % %/oC mV p-p % General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Derating Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Transient recovery time Transient recovery deviation Conditions 100% load With derating above 55 oC (see graph below) Typical 300 -40 to +85 -55 to +125 Maximum Units KHz o o o C Above 55 oC 105 2 Free Air Convection C C %/ oC % RH g o 95 Nickel – coated Copper 60 2.00 x 2.00 x 0.40 inches 50.81 x 50.81 10.14 mm >1 500 000 hrs ( MIL-HDBK-217 F at +25 oC) 1.5mm from case for 10 sec 260 500 25% load step ±4% of Vout C uS Safety Specifications Parameters Standards Designed to meet IEC 60950-1:2001 and EN55022:2006 + A1:2007, Class B Pin Out Specifications Pin 1 2 3 4 5 6 Single +V Input -V Input No Pin +V Output -V Output On/Off (option) www.aimtec.com F 051e R12.B Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM40U-AZ 40 Watt | DC-DC Converter Dimensions Derating Free Air Convection 55º C 100 80 60 40 20 0 - 40 - 20 0 20 40 60 80 85 Trimming Safe Operating Area 100 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity