AM50E-2405SVZ-ST

AM50E-VZ DC-DC Converter Click to ORDER AM50E-VZ samples This new AM50E-VZ series in a 50W DC/DC converter that provides a 2:1 input voltage range. The input/output isolation voltage up to 1500VDC ensures it meets the standard DC operating environment and EN62368 standard requirements. The converters offer an ultra-wide operating temperature range of -40℃ to +105℃. A variety of protections with input UVP, OSC, OCP, OVP are included. Housed in a 2x1” common industrial standard package, this AM50E-VZ series is available with an optional heat sink with the standard PCB mount, chassis mount and DIN rail mount, offering flexibility to the designer of the end-product. This series is designed for applications in industrial instrumentation, telecom, lighting equipment, information display and other industrial related equipment. 2” x 1” Features • • • • • Summary Operating Temp: -40 °C to +105 °C Isolation voltage: 1500VDC High efficiency: 91% typ. Regulated single output Output short circuit, over-current, over-voltage, input under-voltage protection AM50E-VZ 1500 6000 48 200 125 105 105 24 60 1500 36 18 3 5 3.3 50 1000 Input voltage Output voltage (VDC) (V) Isolation (VAC) Power (W) -40 -40 Temp. range (°C) Derating (°C) Applications Training Press Release Coming Soon! Power Grid Product Training Video (click to open) F 052e R4 Rev: 05/22/A Industrial Telecom Instrumentation Application Notes www.Aimtec.com 1 AM50E-VZ DC-DC Converter Models & Specifications Single Output Model Input Voltage (VDC) Output Voltage (VDC) Input Current (mA) No Load Full Load typ. Max. Output Current (mA) Max Min Maximum Capacitive Load (µF) Efficiency (%) Full Load Typ. AM50E-2403SVZ 24 (18-36) 3.3 2 1580 10000 500 27000 90 AM50E-2405SVZ 24 (18-36) 5 3 2367 10000 500 18900 90 AM50E-2412SVZ 24 (18-36) 12 5 2341 4167 208 3700 91 AM50E-2415SVZ 24 (18-36) 15 11 2341 3333 167 2000 91 AM50E-2424SVZ 24 (18-36) 24 4 2341 2083 104 1000 91 Add suffix “-ST” for optional screw terminal bottom plate and input reverse polarity protection. Add suffix “-STD” for optional DIN Rail screw terminal bottom plate and input reverse polarity protection. Add suffix “-K” for optional heat sink. Due to the input reverse polarity protection, models with “-ST” and “-STD” option will have their minimum input and start-up voltage increased by 1VDC and efficiency decreased by 2%. Input Specification Parameters Input voltage Absolute maximum rating Start-up voltage Shut down voltage Start-up time On/Off control Conditions Typical Maximum Units Nominal 24V 1s max. 18 - 36 ≥-0.7 40 50 18 VDC VDC VDC VDC ms 13 10 Nominal input, Constant resistance load On Off Idle current Input filter 120 Control pin open or 3.5-12VDC Control pin short to –Vin or 0-1.2VDC 6 12 mA Pi filter Isolation Specification Parameters Tested isolation voltage Resistance Capacitance Conditions Typical Input / output 60 sec, ≤ 1mA Input, output / case 60 sec, ≤ 1mA 500VDC 100KHz / 0.1V ≥1500 ≥1000 ≥100 2200 Conditions Typical Maximum Units VDC VDC MΩ pF Output Specification Parameters Voltage accuracy Line regulation Load regulation Short circuit protection Over current protection Over voltage protection Transient Recovery Time Transient Response Deviation F 052e R4 Rev: 05/22/A 5% -100% load LL – HL 100% load 5% - 100% load ±1 ±0.2 ±0.5 Continues, Auto recovery 140 140 Nominal input, 25% load step change 250 Nominal input, 25% load step change, 3.3/5V output ±3 Nominal input, 25% load step change, others ±3 www.Aimtec.com Maximum Units ±3 ±0.5 ±1 % % % 200 160 500 ±8 ±5 % Io % Vo µs % % 2 AM50E-VZ DC-DC Converter Ripple & Noise 20MHz bandwidth, 5% -100% load, 3.3/5V output 20MHz bandwidth, 5% -100% load, 12/15V output 20MHz bandwidth, 5% -100% load, 24V output 120 180 240 200 250 300 ±10 mV pk-pk mV pk-pk mV pk-pk % Conditions Typical Maximum Units With derating 300 -40 to +105 -55 to +125 300 ± 0.03 KHz °C °C °C %/ °C Trim General Specifications Parameters Switching frequency* Operating temperature Storage temperature Soldering temperature Temperature coefficient Cooling Humidity 1.5mm distance ≤ 10s 100% Load Free air convection Non-condensing 95 % RH Pin mountable 39 g With optional -ST mounting plate 62 g With optional -STD mounting plate 82 g Weight With optional -K Pin mountable 47 g With optional -ST-K mounting plate 70 g With optional -STD-K mounting plate 90 g Pin mountable 2.00 x 1.00 x 0.46inches (50.80 x 25.40 x 11.80mm) With optional -ST mounting plate 2.99 x 1.24 x 0.83inches (76.00 x 31.50 x 21.20mm) With optional -STD mounting plate 2.99 x 1.24 x 1.02inches (76.00 x 31.50 x 25.80mm) Dimensions (L x W x H) With optional -K Pin mountable 2.02 x 1.03 x 0.65inches (51.40 x 26.20 x 16.50mm) With optional -ST-K mounting plate 2.99 x 1.24 x 1.00inches (76.00 x 31.50 x 25.30mm) With optional -STD-K mounting plate 2.99 x 1.24 x 1.18inches (76.00 x 31.50 x 29.90mm) Case material Aluminum Alloy Vibration 10 – 150Hz, 5G, 0.75mm, along all axels MTBF > 1 000 000 hrs (MIL-HDBK -217F, t=+25°C) *Switching frequency reduces when load under 50%. NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity