AM5TG-241509DH30-NZ

Series AM5TG-NZ 5 Watt | DC-DC Converter FEATURES: • • • • • • • • I/O Isolation of 3,000VDC Efficiency up to 85% 2:1 Wide Input Voltage Range Industry Standard Pin-out IGBT dedicated DC-DC converter Operating temperature range: -40 to +85°C Continuous short circuit protection Output Over-Voltage Protection Models Dual output Model AM5TG-121509DH30-NZ AM5TG-241509DH30-NZ Input Voltage (V) Input current FL (mA) Output Voltage (V) Max Output Current (mA) Min Output Current (mA) Max Capacitive Load (uF) Efficiency (%) 7-18 18-36 471 235 +15 / -9 +15 / -9 ±200 ±200 ±10 ±10 680 1000 83 85 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity1,000,000hrs (MIL-HDBK -217F, Ground Benign, t=+25 oC) 1.5 mm from case for 10sec 300 % RH Free air convection g oC Safety Specifications Parameters Pin Out Specifications Dual 2 3 9 11 14 16 22 23 -Vin -Vin Common - V Output + V Output Common +Vin +Vin Dimensions 32.00 (1.26) 22.90 (0.90) 0.50 (0.02) 2 3 20.00 (0.78) Pin EN55025/CISPR25, Class 3 (with the recommended EMC circuit) EN55022, Class A (with the recommended EMC circuit) IEC 61000-4-2, Contact +/-4kV, Criteria B IEC 61000-4-3, 10V/m, Criteria A IEC 61000-4-4, +/-2kV, Criteria B, (with the recommended EMC circuit) IEC 61000-4-5, L-L +/-2kV, Criteria B, (with the recommended EMC circuit) IEC 61000-4-6, 3Vrms, Criteria A IEC 61000-4-29, 0%-70%, Criteria B 11 9 15.24 (0.60) Standards 12V Input EMI - Conducted and radiated emission 24V Input Electrostatic Discharge Immunity RF, Electromagnetic Field Immunity Electrical Fast Transient/Burst Immunity Surge Immunity RF, Conducted Disturbance Immunity Immunity of Short interruption Bottom View 23 22 16 14 2.54 (0.10) 5.08 (0.20) Built-in Stand-offs to ease PCB cleaning 10.80 (0.425) Printed Face 4.10 (0.16) All dimensions are typical: millimeters (inches) Pin Diameter: 0.50 ± 0.05 (0.02 ± 0.002) Pin Pitch Tolerance: ± 0.35 (±0.014) Case Tolerence: ± 0.5 (±0.02) Derating Free Air Convection Free Air Convection Input 12V, wind speed 0.8m/s 100 80 Output Power (%) Output Power (%) 100 Safe Operating Area 60 40 20 Safe Operating Area 60 40 20 0 - 40 85º C 80 0 - 20 0 20 40 60 80 100 - 40 - 20 0 20 40 60 71 80 100 Ambient Temperature º C Ambient Temperature º C Application Circuit www.aimtec.com F 051e R4 Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM5TG-NZ 5 Watt | DC-DC Converter Specification C1 C2,C3 C4,C5 Control circuit 100uF/63V EC 100uF/35V EC 10uF/25V CC +Vin Rg IGBT IGBT Driver +Vo 1 C1 100µF C2 100µF C4 10µF C3 100µF C5 10µF 0V DC-DC Converter 2 -Vo -Vin EMI Recommended Circuit (Class A) 12V models Single Output C1 C2 C3 330uF/ 330uF/ 330uF/ 50V 50V 50V FUSE + Vin + + + MOV LDM 4.7uF C4 4.7uF/ 50V C5 4.7uF/ 50V LCM 10mH CY1 561K/400VAC L3 1700Ω/60MHz L2 1700Ω/60MHz C6 4.7uF/ 50V C7 C8 0.1nF/ 1nF/50V 50V - Vin + Vout + Vout + Vin DC C9 0.1nF/50V C10 0.1nF/50V Common C11 0.1nF/50V C12 0.1nF/50V DC - Vin - Vout L4 1700Ω/60MHz - Vout CY2 561K/400VAC 24V models Single Output LCM 3.3mH FUSE + Vin MOV S14K35 - Vin + C1 330uF /50V C2 4.7uF /50V + Vin C3 4.7uF /50V DC - Vin + Vout DC - Vout + Vout C4 100uF/ 35V Common C5 100uF/ 35V - Vout NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity