AM5TW-4805SC

AM5TW-C Series 5 watt dc-dc converters • • • • 24 PIN DIP PACKAGE PLASTIC ENCAPSULATED CASE POWER MODULES FOR PCB MOUNTING 4:1 WIDE INPUT RANGE • • • REGULATED OUTPUT LOW RIPPLE & NOISE OPERATING TEMPERATURE : -25 … +71°C GENERAL DESCRIPTION Our AM5TW-C series is a family of cost effective 5W single and dual output DC-DC converters. These shielded converters are aluminum encapsulated on all six sides, have a non-conductive base & retain an anodized black DIP24 compatible plastic case (31.8x20.3x10.2mm). The high performance features of AM5TW-C series include current limit auto recovery short circuit protection, tight line regulation and high efficiency operation coefficient up to 78%. These wide range devices operate over 4:1 input voltage range, providing a continuously stable output voltage. Input voltage range of 24 & 48VDC converts in output voltages of 3.3, 5, 12, 15, 24, ±5, ±12 & ±15VDC. The normal operation is specified over the full operating temperature range of -25°C to +71°C with no derating required. Cooling is done by free air convection. ELECTRICAL SPECIFICATIONS All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications: Voltage range Filter Isolation Specifications: Rated voltage Resistance Capacitance General Specifications: Efficiency Switching frequency 24VDC, 9~36VDC 48 VDC, 18~75VDC p (Pi) Network 1500VDC >1000Mohms 1000pF, typ. 73% to 78% 300KHz, typ. 100% load Physical Specifications: Dimensions 31.8x20.3x10.2mm, tolerance ±0.5mm 1.25x0.8x0.4inches Weight 13g Case material Six-side shielded Aluminum with Non-Conductive base, Black Anodize Output Specifications: Voltage accuracy Ripple Noise Short circuit protection Over current protection Environmental Specifications: Operating temperature -25°C …+71°C Storage temperature -55°C …+105°C Case temperature +95°C, max. Humidity (non-condensing) Up to 95% Cooling Free-air convection ±2%, max.