AM6CW-4824S-NZ-STD

Series AM6CW-NZ 6 Watt | DC-DC Converter FEATURES: • • • • • • • • • Wide 4:1 Input Voltage Range High efficiency up to 88% 1500 & 2250VDC Isolation Over Current Protection Design to meet EN50155 Operating Temperature -40ºC to +85ºC Output Over Voltage protection Continuous Short Circuit Protection Input Under Voltage Protection Models Single output Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) AM6CW-2403S-NZ AM6CW-2405S-NZ AM6CW-2409S-NZ AM6CW-2412S-NZ AM6CW-2415S-NZ AM6CW-2424S-NZ AM6CW-4803S-NZ AM6CW-4805S-NZ AM6CW-4812S-NZ AM6CW-4815S-NZ AM6CW-4824S-NZ 9-36 9-36 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 18-75 3.3 5 9 12 15 24 3.3 5 12 15 24 1500 1200 667 500 400 250 1500 1200 500 400 250 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1800 1000 680 470 220 100 1800 1000 470 220 100 79 83 85 87 87 88 79 83 87 88 88 AM6CW-11005SH22-NZ AM6CW-11012SH22-NZ AM6CW-11015SH22-NZ AM6CW-11024SH22-NZ 40-160 40-160 40-160 40-160 5 12 15 24 1200 500 400 250 2250 2250 2250 2250 1000 470 220 100 80 84 85 86 Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Capacitive Load(uF) Efficiency (%) AM6CW-2405D-NZ AM6CW-2412D-NZ AM6CW-2415D-NZ AM6CW-2424D-NZ AM6CW-4805D-NZ AM6CW-4812D-NZ AM6CW-4815D-NZ 9-36 9-36 9-36 9-36 18-75 18-75 18-75 ±5 ±12 ±15 ±24 ±5 ±12 ±15 ±600 ±250 ±200 ±125 ±600 ±250 ±200 1500 1500 1500 1500 1500 1500 1500 ±470 ±100 ±100 ±100 ±470 ±100 ±100 83 87 87 87 83 87 88 AM6CW-11005DH22-NZ AM6CW-11012DH22-NZ AM6CW-11015DH22-NZ 40-160 40-160 40-160 ±5 ±12 ±15 ±600 ±250 ±200 2250 2250 2250 ±470 ±100 ±100 80 84 85 Model Models Dual output Model Note: * Add suffix “-ST” for optional screw terminal bottom plate. ** Add suffix “-STD” for optional DIN Rail screw terminal bottom plate. *** For 110V input models, add suffix “-K” for optional heatsink. **** For 110V input models, add suffix “-K-ST” for optional heat sink with screw terminal bottom plate. ***** For 110V input models, add suffix “-K-STD” for optional heat sink with DIN Rail screw terminal bottom plate. ****** -ST and -STD bottom plates come with the reverse polarity protection and will reduce the efficiency by 2%. ******* For 24V and 48V input models with -ST or -STD option, the input under voltage protection threshold and minimum input voltage will increase by 1V. NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity