AM8T-4815DC

AM8T-C Series 8 watt dc-dc converters • • • • 24PIN DIP PACKAGE PLASTIC ENCAPSULATED CASE POWER MODULES FOR PCB MOUNTING 2:1 WIDE INPUT RANGE • • • REGULATED OUTPUT LOW RIPPLE & NOISE OPERATING TEMPERATURE : -25…+71°C DC-DC CONVERTERS GENERAL DESCRIPTION Our AM8T-C series is a family of cost effective 8W single and dual output DC-DC converters. These converters are shielded on all six sides and aluminum encapsulated, have a non-conductive base and retain an anodized black DIP24 compatible plastic case and dimensions of 31.8x20.3x10.2mm. The high performance features of our AM8T-C components include short circuit protection with current limit auto recovery, tight line regulation and a high efficiency operation coefficient up to 82%. Twenty four models operate from an input voltage range of 12, 24 & 48VDC producing output voltages of 3,3, 5, 12, 15, 24, ±5, ±12 & ±15VDC. The normal operation is specified over the full operating temperature range of -25°C to +71°C with no derating required. Cooling is done by free air convection. ELECTRICAL SPECIFICATIONS All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications: Voltage range Output Specifications: Voltage accuracy Ripple Noise Short circuit protection Over current protection Filter Isolation Specifications: Rated voltage Resistance Capacitance General Specifications: Efficiency Switching frequency 12VDC, 9~18VDC 24VDC, 18~36VDC 48 VDC, 36~75VDC p (Pi) Network 1500VDC >1000 Mohms 1000pF, typ. 78% to 82% 300KHz, typ. 100% load ±2%, max.