AM8TW-2405DZ

Click on Series name for product info on aimtec.com Series AM8TW-Z 8Watt | DC-DC Converter FEATURES: • • • • Wide 4:1 input range Remote On/Off control High efficiency up to 87% Over Voltage/Overload Protection • • • • Operating temperature -40oC to + 85oC Input / Output Isolation 1600 & 3000VDC Continuous short circuit protection Under voltage lockout for 3000VDC models Models Single output Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Capacitive Load(uF) Efficiency (%) AM8TW-2403SZ AM8TW-2405SZ AM8TW-2412SZ AM8TW-2415SZ AM8TW-4803SZ AM8TW-4805SZ AM8TW-4812SZ AM8TW-4815SZ 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 3.3 5 12 15 3.3 5 12 15 2000 1500 665 535 2000 1500 665 535 1600 1600 1600 1600 1600 1600 1600 1600 1330 1330 288 200 1330 1330 288 200 80 83 87 87 80 84 87 87 AM8TW-2403SH30Z AM8TW-2405SH30Z AM8TW-2412SH30Z AM8TW-2415SH30Z AM8TW-11003SH30Z AM8TW-11005SH30Z AM8TW-11012SH30Z AM8TW-11015SH30Z 13-70 13-70 13-70 13-70 42-176 42-176 42-176 42-176 3.3 5 12 15 3.3 5 12 15 2400 1600 665 535 2400 1600 665 535 3000 3000 3000 3000 3000 3000 3000 3000 1330 1330 330 220 1330 1330 330 220 83 86 85 86 81 84 84 83 Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Capacitive Load(uF) Efficiency (%) AM8TW-2405DZ AM8TW-2412DZ AM8TW-2415DZ AM8TW-4805DZ AM8TW-4812DZ AM8TW-4815DZ 9-36 9-36 9-36 18-75 18-75 18-75 ±5 ±12 ±15 ±5 ±12 ±15 ±800 ±335 ±265 ±800 ±335 ±265 1600 1600 1600 1600 1600 1600 ±900 ±133 ±90 ±900 ±133 ±90 86 86 87 84 87 87 AM8TW-2405DH30Z AM8TW-2412DH30Z AM8TW-2415DH30Z AM8TW-11005DH30Z AM8TW-11012DH30Z AM8TW-11015DH30Z 13-70 13-70 13-70 42-176 42-176 42-176 ±5 ±12 ±15 ±5 ±12 ±15 ±800 ±335 ±265 ±800 ±335 ±265 3000 3000 3000 3000 3000 3000 ±900 ±220 ±100 ±900 ±220 ±100 83 85 86 80 82 83 Model Models Dual output Model NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity1000 1500 1000 Conditions Typical Rated Units 1600 3000 1600 1000 VDC VDC VDC VDC MOhm pF pF Maximum Units Output Specifications Parameters Voltage accuracy Over voltage protection Over load protection Short Circuit protection Line voltage regulation Load voltage regulation Cross regulation (Dual) Temperature coefficient Ripple & Noise* ±1 Zener Diode Clamp, 3.3Vout 3.9 Zener Diode Clamp, 5Vout 6.2 Zener Diode Clamp, 12Vout 15 Zener Diode Clamp, 15Vout 18 Zener Diode Clamp, ±5Vout ±6.2 Zener Diode Clamp, ±12Vout ±15 Zener Diode Clamp, ±15Vout ±18 For 1600VDC Isolation models 150 For 3000VDC Isolation models 160 Continuous, hiccup, auto recovery HL-LL 1600VDC models HL-LL 3000VDC models 0-100% load, 1600VDC isolation dual output models 0-100% load, other models 25-100% load on one output, 100% load on second ±5 output ±0.02 20MHz Bandwidth % % VDC VDC VDC VDC VDC VDC % % ±0.2 ±0.5 ±1 ±0.5 % of Vin % of Vin % % % 75 %/°C mV p-p *1600VDC isolation models are measured with a 1µF ceramic capacitor. 3000VDC isolation models are measured with a 1µF ceramic capacitor and a 10µF electrolytic capacitor. www.aimtec.com F 051e R12.I Rev:04/21/A Tel: +1 514 620 2722 2 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM8TW-Z 8Watt | DC-DC Converter General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Manual soldering temperature Conditions Typical 1600VDC models 24V for 3000VDC models 110V for 3000VDC models Derating above +70°C 270 330 220 -40 to +85 -55 to +125 Maximum Units 105 KHz KHz KHz °C °C °C 95 % RH Free air convection (30-60LFM) Nickel plated Copper 18 g 1.25 x 0.80 x 0.40 inches 31.80 x 20.30 x 10.20 mm > 1,000,000 hours(MIL-HDBK-217F , Ground Benign, t=+25°C) for 1600VDC isolation models > 800,000 hours(MIL-HDBK-217F , Ground Benign, t=+25°C) for 3000VDC isolation models °C 1.5mm from case for 10sec 260 Environment Approval (for 3000V models) Parameters Thermal shock Conditions EN60068 According to EN61373, category 1, class B Wave form: Half sine wave Acceleration amplitude: Axis X – 5G, Axis Y and Z – 3G Bump duration: 30 ms Number of bumps: 18 (3 in each direction for every axis) Converter operation before and after test, body mounted (on chassis) According to EN61373, category 1, class B 5-150Hz 10min per axis & 5h per axis Shock Vibrations Safety Specifications Parameters Agency Approval Standards for 1600VDC models CE, UL (1600VDC models) EMC - Conducted and radiated emission Electrostatic Discharge Immunity RS, Electromagnetic Field Immunity Electrical Fast Transient/Burst Immunity Surge Immunity RF, Conducted Disturbance Immunity Power-frequency magnetic field immunity Information technology Equipment EMC - Conducted and radiated emission Standards for 3000VDC models www.aimtec.com F 051e R12.I Rev:04/21/A Electrostatic Discharge Immunity RS, Electromagnetic Field Immunity Electrical Fast Transient/Burst Immunity Surge Immunity RF, Conducted Disturbance Immunity Power-frequency magnetic field immunity EN55032 Class A, with the recommended circuit IEC61000-4-2, Perf. Criteria A IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria A (external 330uF/100V cap required) IEC61000-4-5, Perf. Criteria A (external 330uF/100V cap required) IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A IEC/EN/UL 60950-1:2001 & IEC/EN/UL 62368-1 EN50121-3-2, 40dbuV, 30 - 230MHz 47dbuV, 230 - 1000MHz 99dbuV, 0.15 - 0.5MHz 93dbuV, 0.5 - 30MHz 79dbuV, 0.15 - 0.5MHz with the recommended circuit 73dbuV, 0.5 - 30MHz with the recommended circuit EN50121-3-2, Air ±8KV/ Contact ±6KV, Perf. Criteria A EN50121-3-2, 20V/m, Perf. Criteria A EN50121-3-2, 2KV, Perf. Criteria A (external 330uF/100V cap required) EN50121-3-2, 2KV, Perf. Criteria A (external 330uF/100V cap required) EN50121-3-2, 10V, Perf. Criteria A EN50121-3-2, 10A/m, Perf. Criteria A Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM8TW-Z 8Watt | DC-DC Converter Dimensions 22.86 (0.9) 31.80 (1.25) 4.42 (0.17) 20.32 (0.8) 9 11 15.24 (0.6) 1 2 3 Stand off Ø1.00 (0.04) Bottom View 23 22 16 14 5.08 (0.2) All dimensions are typical: millimeters (inches) Pin Diameter: 0.50 ± 0.05 (0.02 ± 0.002) Pin Pitch tolerance: ± 0.35 (±0.014) Case tolerance: ± 0.5 (±0.02) Stand off tolerance: ± 0.1 (±0.004) 3.00 (0.12) 0.50 (0.02) 10.20 (0.4) 5.01 (0.19) 2.54 (0.1) Pin Single Dual 1 2 3 9 11 14 16 22 23 Remote On/Off -V Input -V Input No Pin N.C. +V Output -V Output +V Input +V Input Remote On/Off -V Input -V Input Common -V Output +V Output Common +V Input +V Input N.C.: Not Connected Derating Output Power (%) 100 80 Safe Operating Area 60 50 40 20 0 - 40 - 20 0 20 40 60 70 80 85 100 Ambient Temperature °C www.aimtec.com F 051e R12.I Rev:04/21/A Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM8TW-Z 8Watt | DC-DC Converter Recommended Circuits for 1600VDC isolated models L Vin+ Vin- Conducted emission Vo+ 12µH C1 2.2µF/ 100V C2 2.2µF/ 100V Vo- Surge/EFT Vin+ Vo+ 330µF/ 100V Vin- Vo- Recommended Circuits for 3000VDC isolated models Conducted emission Vin+ Vo+ C1 C2 C3 Vin- Vo- Models AM8TW-24xxxH30z AM8TW-110xxxH30z C1, C2, C3 1µf/250V Models AM8TW-24xxxH30z AM8TW-110xxxH30z C1 330µF/100V 100µF/250V Surge/EFT Vin+ Vo+ C1 Vin- Vo- NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity