AM8TW-4815DC

AM8TW-C Series 8 watt dc-dc converters • • • • 24PIN DIP PACKAGE PLASTIC ENCAPSULATED CASE POWER MODULES FOR PCB MOUNTING 4:1 WIDE INPUT RANGE • • • REGULATED OUTPUT LOW RIPPLE & NOISE OPERATING TEMPERATURE : -25 … +71°C DC-DC CONVERTERS GENERAL DESCRIPTION Our AM8TW-C series is a family of cost effective 8W single and dual output DC-DC converters. These converters are shielded on all six sides and aluminum encapsulated, have a non-conductive base and retain an anodized black DIP24 compatible plastic case and dimensions of 31.8x20.3x10.2mm. The high performance features of our AM8TW-C components include short circuit protection with current limit auto recovery, tight line regulation and a high efficiency operation coefficient up to 82%. These wide range devices operate over 4:1 input voltage range, providing a continuously stable output voltage. Sixteen models operate from an input voltage range of 24 & 48VDC producing output voltages of 3,3, 5, 12, 15, 24, ±5, ±12 & ±15VDC. The normal operation is specified over the full operating temperature range of -25°C to +71°C with no derating required. Cooling is done by free air convection. ELECTRICAL SPECIFICATIONS All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications: Voltage range Filter Isolation Specifications: Rated voltage Resistance Capacitance General Specifications: Efficiency Switching frequency Output Specifications: Voltage accuracy Ripple Noise Short circuit protection Over current protection 24VDC, 9~36VDC 48 VDC, 18~75VDC p (Pi) Network 1500VDC >1000 Mohms 1000pF, typ. ±2%, max.