AME20-5SJZ

Click on Series name for product info on aimtec.com Series AME20-JZ 20 Watt | AC-DC / DC-DC Converter FEATURES: • • • • I/O Isolation 3000VAC Operating Temp: -40°C to +70°C Over current Protection Input: 85-305VAC, 47-63Hz, or 100-430VDC • • • • Low Ripple and Noise Over Voltage Protection Up to 85% efficiency Short Circuit Protection Models Single output Model Input Voltage (VAC/Hz) Input Voltage (VDC) Max Output wattage (W) Output Voltage (V) Output Current max (A) Maximum capacitive load (µF) Efficiency (%) 230 VAC AME20-3.3SJZ 85-305/47-63 100-430 11.5 3.3 3.5 48000 75 AME20-5SJZ 85-305/47-63 100-430 17.5 5 3.5 12240 78 AME20-9SJZ 85-305/47-63 100-430 18.9 9 2.1 5600 79 AME20-12SJZ 85-305/47-63 100-430 19.2 12 1.6 5400 83 AME20-15SJZ 85-305/47-63 100-430 19.5 15 1.3 2400 84 AME20-24SJZ 85-305/47-63 100-430 20 24 0.85 1840 85 Note: *Add suffix “-ST” for optional screw terminal bottom plate, add suffix “-STD” for optional DIN Rail screw terminal bottom plate Input Specifications Parameters Current (full load) Inrush current 1000 General Specifications Parameters Conditions Typical Switching frequency Over current protection Over voltage protection Short circuit protection Operating temperature www.aimtec.com Maximum 65 ≥110 KHz % of Iout 3.3V,5V output models 9V output models 12V output models 15V output models 7.5 12 20 30 Auto recovery -40 to +70 See derating curve Tel: +1 514 620 2722 Units VDC °C Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.A REV: 03/20/A 1 of 7 North America only Series AME20-JZ 20 Watt | AC-DC / DC-DC Converter Maximum case temperature Storage temperature Temperature coefficient Cooling Humidity Case material Weight 100 -40 to +85 ±0.02 Free air convection °C °C % / °C Non condensing 95 % RH Plastic (flammability to UL 94V-0) Pin mountable 120 Screw terminal bottom plate 170 g DIN Rail screw terminal bottom plate 210 Dimensions (L x W x H) Pin mountable 70.0 x 48.0 x 23.5 mm (2.76 x 1.89 x 0.93 inches) Screw terminal bottom plate 96.1 x 54.0 x 32.0 mm (3.78 x 2.13 x 1.26 inches) DIN Rail screw terminal bottom plate 96.1 x 54.0 x 36.6 mm (3.78 x 2.13 x 1.44 inches) MTBF > 300 000 hrs (MIL-HDBK -217F, t=+25oC)/ Full Load NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity