AME25-24S277PEVZ

AME25-277PEVZ AC-DC Converter Preliminary Click to ORDER AME25-277PEVZ samples The AME25-277PEVZ is a whole new AC/DC converter that offers much greater cost effectiveness due to material normalization and production automation also leading to improved reliability and performance. Offering a commercial input voltage range of 85-305VAC and an output voltage range from 3.3-24V, this series will offer many benefits to your new system design. This new series offers great operating temperatures from -40℃ to 85℃, also features an isolation of 4200VAC for improved reliability and system safety. Furthermore, a higher MTBF of 500,000h, output short circuit protection (OSCP), output over-current protection (OCP) and an output over-voltage protection (OVP) come standard with the series. The AME25-277PEVZ is perfect for street lighting controls, grid power, EVSE, industrial controls, UPS, battery storage system and energy management applications. Encapsulated Features • • • • • • Summary Universal Input: 85 - 305VAC/100 - 430VDC Operating Temp: -40 °C to +85 °C High isolation voltage: 4200VAC Low ripple & noise, 50mV(p-p), typ. Output short circuit, over-current, over-voltage protection Regulated Output AME25-277PEVZ 528 48 4200 60 105 305 85 85 26.4 50 1000 85 0 3.3 13.5 1 -25 -40 Input voltage Output voltage (VAC) (V) Isolation (VAC) Power (W) -40 Temp. range (℃) Derating (℃) Applications Training Press Release Coming Soon! Power Grid Product Training Video (click to open) F 052e R4 Industrial Telecom Instrumentation Application Notes www.Aimtec.com 1 AME25-277PEVZ AC-DC Converter Preliminary Models & Specifications Single Output Model Input Voltage (VAC/Hz) Input Voltage (VDC) Max Output wattage (W) Output Voltage (V) Output Current max (A) Maximum capacitive load (µF) Efficiency @ 230VAC (%) AME25-3S277PEVZ AME25-5S277PEVZ AME25-9S277PEVZ AME25-12S277PEVZ AME25-15S277PEVZ AME25-24S277PEVZ AME25-48S277PEVZ 85-305/47-63 100-430 13.5 3.3 4.1 48000 78 85-305/47-63 100-430 20.5 5 4.1 12240 82 85-305/47-63 100-430 22.5 9 2.5 5600 82 85-305/47-63 100-430 25 12 2.1 5400 84 85-305/47-63 100-430 24 15 1.6 2400 85 85-305/47-63 100-430 26.4 24 1.1 1440 85 85-305/47-63 100-430 24 48 0.5 600 87 Note: Use suffix “ST” for chassis and suffix “STD” for DIN-Rail mounting (ex. AME25-3S277PEVZ-ST is chassis mounting and AME25-3S277PEVZSTD is DIN-Rail mounting version). Input Specifications Parameters Current Inrush current Leakage current External fuse Conditions Minimum 115VAC 230VAC 115VAC 230VAC 270V/50Hz slow blow type,300V Typical Maximum Units 0.6 0.34 A A A A mA (RMS) A 20 40 0.25 3.15 Output Specifications Parameters Conditions Typical 3.3V output ±3 Others ±2 Full load ±0.5 Line regulation 0-100% load ±1 Load regulation 20MHz bandwidth 50 Ripple & Noise* 115VAC 10 Hold up time 230VAC 60 * Ripple and Noise are measured at 20MHz bandwidth by using the referenced Application circuit. Maximum Voltage accuracy F 052e R4 www.Aimtec.com 100 Units % % % % mVp-p ms ms 2 AME25-277PEVZ AC-DC Converter Preliminary Isolation Specifications Parameters Tested I/O voltage Tested Input to PE voltage Tested Output to PE voltage Impulse voltage (I/O, Input/PE, Output/PE) Insulation resistance (I/O, Input/PE, Output/PE) Conditions Typical 60 sec, leakage current < 5mA 60 sec, leakage current < 5mA 60 sec, leakage current < 5mA Apply 6kV impulse test voltage. Add 1.2/50us impact waveform, including three positive impulse and three negative impulse, whose time interval is no less than 5 seconds. 500VDC Rated Units 4200 2500 1250 VAC VAC VAC 6000 V ≥ 100 MΩ Maximum Units 7.5 15 20 30 60 % of Iout VDC VDC VDC VDC VDC General Specifications Parameters Safety class Overvoltage category Over Current protection Over voltage protection Conditions Auto recovery 3.3V / 5V Vout 9V Vout 12V /15V Vout 24V Vout 48V Vout Typical Class I OVC III; Per IEC 62477, 2000m ≥ 150 Hiccup, Continuous, Auto recovery oC -40 to +85 oC -40 to +105 o Wave soldering 260 ± 5 C; time：5 - 10s Lead temperature Hand soldering 360 ± 10 oC; time：3 - 5s 230VAC, Others 0.3 W Power consumption 230VAC, 48V Vout 0.4 W o o -40 C ~ -25 C 3.33 % / oC o o 50 C ~ 70 C 2.5 % / oC o o 70 C ~ 85 C 0.67 % / oC Power derating 85VAC ~ 100VAC 1 % / VAC 277VAC ~ 305VAC 0.715 % / VAC 2000m – 5000m 6.67 % / Km ±0.02 % / oC Temperature coefficient Free air convection Cooling Non-condensing 95 % RH Humidity Heat resistant black Plastic (flammability to UL 94V-0) Case material PCB mountable models 120 With optional -ST mounting plate: 170 g Weight With optional -STD mounting plate: 210 PCB mountable models 2.76 x 1.89 x 0.93 inches (70.0 x 48.0 x 23.5mm) With optional -ST mounting plate 3.78 x 2.13 x 1.26 inches (96.1 x 54.0 x 32.0mm) Dimensions (L x W x H) With optional -STD mounting plate 3.78 x 2.13 x 1.44 inches (96.1 x 54.0 x 36.6mm) > 300 000 hrs (MIL-HDBK -217F, t=+25oC)/Full Load MTBF NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity