AMEL10-5SMJZ

Click on Series name for product info on aimtec.com Series AMEL10-MJZ 10 Watt | AC-DC / DC-DC Converter FEATURES: • I/O Isolation 4000VAC • Operating Temp: -25°C to +70°C • Over current, Over Voltage • Input: 85-264VAC, 47-440Hz, or 100-370VDC • • • Low no load consumption ≤0.5W Continuous Short Circuit Protection Up to 83% efficiency Models Single output Model AMEL10-3.3SMJZ AMEL10-5SMJZ AMEL10-9SMJZ AMEL10-12SMJZ AMEL10-15SMJZ AMEL10-24SMJZ Input Voltage (VAC/Hz) Input Voltage (VDC) 85-264/47-440 85-264/47-440 85-264/47-440 85-264/47-440 85-264/47-440 85-264/47-440 100-370 100-370 100-370 100-370 100-370 100-370 Max Output wattage (W) 6.6 10 10 10 10 10 Output Voltage (V) Output Current max (A) Maximum capacitive load (µF) Efficiency (%) 2.00 2.00 1.10 0.90 0.70 0.45 15,000 12,000 6,000 2,000 1,500 500 71 76 80 81 82 83 3.3 5 9 12 15 24 *Output power must not exceed the listed values. All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity 300 000 hrs (MIL-HDBK -217F, t=+25oC)/Full Load Safety Specifications Parameters Agency approvals Standards cULus, CE Medical Electrical Equipment Information technology Equipment EMI - Conducted and radiated emission Electrostatic Discharge Immunity RF, Electromagnetic Field Immunity Electrical Fast Transient/Burst Immunity Surge Immunity RF, Conducted Disturbance Immunity Power frequency Magnetic Field Immunity Voltage dips, Short Interruptions Immunity Pin Out Specifications Pin Single 1 2 3 4 AC Input (N) AC Input (L) +V Output -V Output Dimensions 53.80 (2.12) 45.72 (1.80) Case Temperature Measurement point 1 3 1 10.16 (0.40) 28.80 20.32 (1.13) (0.80) TOP VIEW 4 TOP VIEW + 2 2 19.00 (0.75) Ø 1.00 (0.04) Tel: +1 514 620 2722 3 4 5 Ø 1.5 (Ø 0.06) 6.00 (0.24) www.aimtec.com Meets IEC/EN/UL 60601-1, 2 x MOPP IEC/EN/UL 60950-1 EN55011, class A IEC 61000-4-2 Level 3 IEC 61000-4-3 Level 3 IEC 61000-4-4 Level 3 IEC 61000-4-5 Level 2, with application circuit IEC 61000-4-6 Level 3 IEC 61000-4-8 Level 3 IEC 61000-4-11 Class 2 DIV: 5.08 (0.2) Dimensions mm (inch) Case Tolerance ±0.50 (±0.02) Pin Diameter 1.0 ± 0.10 (0.04 ± 0.004) Pin Pitch Tolerance ±0.35 (±0.014) Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.B REV: 02/20/A 2 of 3 North America only Series AMEL10-MJZ 10 Watt | AC-DC / DC-DC Converter Derating Free Air Convection at 25°C Free Air Convection 100 80 Output Power (%) 100 Safe Operating Area 70 Input 110-240VAC or 140-340VDC 60 50 40 80 Safe Operating Area 60 40 20 20 0 85 100 (100) (140) 0 - 25 -20 -10 55 0 20 40 70 60 80 100 Ambient Temperature º C 240 (340) 264 (270) Input Voltage VAC (VDC) Typical application circuit Single Output FUSE 2A/250V 4 AC L AC L MOV S14K350 AC AC N + Vout + DC AC N TVS C1 C2 1µF/50V 3 - Vout Class B compliance recommended circuit FUSE 2A/250V LDM 4.7µH/2A Single Output R1 12 /3W LCM 2.2mH AC N AC L MOV S14K350 CX 0.1µF/ 275VAC CY1 1nF/ 400VAC CY2 1nF/ 400VAC AC N AC L R2 12 /3W GND Model 3.3 & 5 Vout 9Vout 12 & 15 Vout 24 Vout AC C2 220 µF / 10V 120 µF / 25V 120 µF / 25V 68 µF / 35V +Vout DC - Vout +Vout C1 C2 1µF/50V + TVS - Vout TVS 7V 12V 20V 30V NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity