AMEL20-12SCJZ

Click on Series name for product info on aimtec.com Series AMEL20-CJZ 20 Watt | AC-DC / DC-DC Converter FEATURES: • I/O Isolation 4000VAC • Operating Temp: -40°C to +70°C • Over current, Over Voltage Protection • Input: 85-264VAC, 47-63Hz, or 100-370VDC • • • Continuous Short Circuit Protection Up to 83% efficiency Low ripple and noise Models Single output Output Current max (A) Maximum capacitive load (µF) Efficiency (%) 11.8 18 20 20 20 20 3.3 5 9 12 15 24 3.6 3.6 2.2 1.66 1.33 0.833 10,000 6,600 4,400 3,000 2,000 800 74 78 79 82 83 83 Input Voltage (VDC) Max Output wattage 85-264/47-63 85-264/47-63 85-264/47-63 85-264/47-63 85-264/47-63 85-264/47-63 100-370 100-370 100-370 100-370 100-370 100-370 Model AMEL20-3.3SCJZ AMEL20-5SCJZ AMEL20-9SCJZ AMEL20-12SCJZ AMEL20-15SCJZ AMEL20-24SCJZ (W) Output Voltage (V) Input Voltage (VAC/Hz) *Output power must not exceed the listed values. Note: Add suffix “-ST” for optional screw terminal bottom plate or “-STD” for optional DIN Rail screw terminal bottom plate. (ex. AMEL20-3.3SCJZ-ST, AMEL20-3.3SCJZ-STD). All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity 300 000 hrs (MIL-HDBK -217F, t=+25°C)/Full Load Wave soldering, duration 5 to 10s 260 °C Manual soldering, duration 3 to 5s 360 °C Safety Specifications Parameters Agency approval Standards cULus Information technology Equipment EMI - Conducted and radiated emission Electrostatic Discharge Immunity RF, Electromagnetic Field Immunity Electrical Fast Transient/Burst Immunity UL60950-1, UL62368-1 EN55032, class B IEC61000-4-2, Contact ±6KV/ Air ±8KV, Criteria B IEC61000-4-3, 10V/m, Criteria A IEC61000-4-4, ±4KV, Criteria B IEC61000-4-5, L-L ±2KV, Criteria B Surge Immunity IEC61000-4-5, L-L ±4KV/ L-G ±6KV, Criteria B (With the recommended circuit) RF, Conducted Disturbance Immunity IEC61000-4-6, 10Vrms, Criteria A Voltage dips, Short Interruptions Immunity IEC61000-4-11, 0% 70%, Criteria B Pin Out Specifications Pin Single 1 2 3 4 AC Input (N) AC Input (L) +V Output -V Output Dimensions 53.80 (2.12) 45.72 (1.80) 1 3 10.16 (0.40) 28.80 20.32 (1.13) (0.80) TOP VIEW TOP VIEW 4 3 4 2 2 23.50 (0.93) Ø 1.5 (Ø 0.06) Ø 1.00 (0.04) 6.00 (0.24) www.aimtec.com 1 Tel: +1 514 620 2722 DIV: 5.08 (0.2) Dimensions mm (inch) General Tolerance ±0.50 (±0.02) Pin Diameter 1.0 ± 0.10 (0.04 ± 0.004) Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.C Rev: 03/22/A 2 of 5 North America only Series AMEL20-CJZ 20 Watt | AC-DC / DC-DC Converter With optional -ST bottom plate 76.00 (2.99) 61.60 (2.43) Pin Out Specifications LED light 3 Top view 23.00 (0.91) 31.50 (1.24) 1 2 Pin Single 1 2 3 4 AC Input (N) AC Input (L) +V Output -V Output 4 Dimensions: mm (inch) General tolerance:± 1.00 (0.04) Wire gauge: 24-12AWG Tightening torque: 0.4N-m 8.80 (0.35) 21.20 (0.84) Side view 32.30 (1.27) Ø3.30 (0.13) With optional -STD bottom plate 76.00 (2.99) 61.60 (2.43) 1 3 Top view 2 4 25.8 (1.02) 9.80 (0.39) Side view www.aimtec.com Tel: +1 514 620 2722 36.90 (1.45) 23.00 (0.91) 31.50 (1.24) LED light Pin Out Specifications Pin Single 1 2 3 4 AC Input (N) AC Input (L) +V Output -V Output Dimensions: mm (inch) General tolerance:± 1.00 (0.04) Wire gauge: 24-12AWG Tightening torque: 0.4N-m Rail type: TS35 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.C Rev: 03/22/A 3 of 5 North America only Series AMEL20-CJZ 20 Watt | AC-DC / DC-DC Converter Derating for AMEL20-5SCJZ Free Air Convection at 25°C Free Air Convection 100 Output Power (%) Output Power (%) 100 80 75 60 Safe Operating Area 100-370 VDC 85-264 VAC 40 33 20 80 70 60 40 20 0 85 (100) 0 - 40 -20 0 20 40 Safe Operating Area 70 80 60 100 240 (340) 130 (160) 264 (370) Input Voltage VAC (VDC) Ambient Temperature º C Derating for all other part numbers Free Air Convection Free Air Convection at 25°C 100 Output Power (%) Output Power (%) 100 80 75 60 3.3V Output Safe Operating Area 100-370 VDC 85-264 VAC 40 33 30 12V/15V/24V Output 60 Safe Operating Area 40 20 20 0 85 100 (100) (120) 0 - 40 80 70 -25 0 20 40 60 70 80 100 240 (340) 264 (370) Input Voltage VAC (VDC) Ambient Temperature º C Typical application circuit AC L FUSE 3.15A/250V Slow blow MOV S20K300 AC N Single Output + Vout AC L AC DC AC N - Vout + Vout C1 C2 1µF/50V + TVS - Vout Model C2 C2 (For high frequency switch type load) TVS 3.3 & 5 Vout 220 µF / 16V 470 µF / 16V (Solid capacitor) 7V 9 Vout 120 µF / 25V 470 µF / 16V (Solid capacitor) 12V 12 & 15 Vout 120 µF / 25V 390μF / 25V 20V 24 Vout 68 µF / 35V 220μF / 35V 30V For filtering components: Choose capacitors with at least 20% voltage margin. The C2 capacitor is recommended to use electrolytic type with high frequency and low ESR rating. The C1 capacitor is recommended to use ceramic type for filtering high-frequency noise. www.aimtec.com Tel: +1 514 620 2722 Toll free: + 1 888 9 AIMTEC (924 6832) F 052e R8.C Rev: 03/22/A 4 of 5 North America only Series AMEL20-CJZ 20 Watt | AC-DC / DC-DC Converter To meet surge Immunity ±4KV/±6KV recommended circuit AC L FUSE 6.3A/250V Slow blow MOV S20K300 AC N GND LDM 4.7µH R CX 1MΩ/ 0.22µF/ 2W 275VAC Single Output LCM 2mH MOV S10K300 MOV S10K300 GDT EM3600XS C2in 1nF/ 400VAC C1in 1nF/ 400VAC AC N AC AC L +Vout DC - Vout +Vout C2 C1 1µF/50V + TVS - Vout NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity