AMEOF550-48SHAMJZ

AMEOF450-HAMJZ AC-DC Converter Preliminary Click to ORDER AMEOF450-HAMJZ samples AMEOF450-HAMJZ series is one of Aimtec’s compact size (3”x5”x1.52”) 450W AC/DC converter with active PFC and suitable for medical system equipment. It features universal AC input and at the same time accepts DC input voltage, cost-effective, high efficiency, high reliability and double or reinforced isolation. These converters offer excellent EMC and safety performance, which meet IEC/EN/UL62368, GB4943, EN60335, IEC/EN61558, IEC/EN/ES60601 standards and they are widely used in areas of industrial, LED, street light control, electricity, security, telecommunications, smart home, medical, etc. Open Frame/ Enclose Features • • • • • • • • Summary Universal Input: 90 - 264VAC/127 - 370VDC Operating Temp: -40 °C to +70 °C High isolation voltage: 4000VAC Active PFC Output short circuit, over-current, over-voltage, over temperature protection Low no-load power consumption of 0.5W Suitable for Type BF application Designed to meet IEC/EN/UL62368, EN60335, IEC/EN61558, IEC/EN/ES60601-1 2xMOPP AMEOF450-HAMJZ 528 4000 550 125 450 125 48 264 90 250 70 40 1000 12 1 3.3 Input voltage Output voltage (VAC) (V) Isolation (VAC) Power (W) -40 -40 Temp. range (°C) Derating (°C) Applications Training Press Release Coming Soon! Power Grid Product Training Video (click to open) F 052e R4 Rev: 06/21/A Industrial Telecom Medical Application Notes www.Aimtec.com 1 AMEOF450-HAMJZ AC-DC Converter Preliminary Models & Specifications Single Output Model Input Voltage (VAC/Hz) Input Voltage (VDC) Cooling method / package Max Output Output Voltage wattage (V) Output Output Maximum Efficiency Voltage Current capacitive @230VAC Adjustable (A)* load (µF) Typ. (%)** Range (V) (W) Free air convection 250 20.8 AMEOF450-12SHAMJZ 90-264/47-63 127-370 12 11.4 -12.6 6000 25CFM or -FB option 400 33.3 Free air convection 250 16.7 AMEOF450-15SHAMJZ 90-264/47-63 127-370 15 14.25 -15.75 6000 25CFM or -FB option 400 26.7 Free air convection 250 10.5 AMEOF450-24SHAMJZ 90-264/47-63 127-370 24 22.8 -25.2 6000 25CFM or -FB option 450 18.75 Free air convection 250 9.3 AMEOF450-27SHAMJZ 90-264/47-63 127-370 27 25.65 - 28.35 4000 25CFM or -FB option 450 16.7 Free air convection 250 6.95 AMEOF450-36SHAMJZ 90-264/47-63 127-370 36 34.2 - 37.8 3000 25CFM or -FB option 450 12.5 Free air convection 250 5.3 AMEOF450-48SHAMJZ 90-264/47-63 127-370 48 45.6 - 50.4 2000 25CFM or -FB option 450 9.4 Add suffix -F for enclosed package. (ex. AMEOF450-12SHAMJZ-F is enclosed package version) Add suffix -FB for enclosed package with built-in fan. (ex. AMEOF450-12SHAMJZ-FB is enclosed package with built-in fan version) * The output current must not exceed the rated value when the output voltage is trimmed down. ** Tested under forced air convection. Fan power consumption is not included. 91 92 93 93.5 93 94 Input Specifications Parameters Input current Inrush current Leakage Power factor ON/OFF control Conditions Typical Maximum Units 5.2 2.6 0.1 0.5 A A A A mA mA 90/115VAC 230VAC 115VAC, cold start 230VAC, cold start 264VAC, contact leakage 264VAC, earth leakage 115VAC, 100% load 230VAC, 100% load On Off ≥0.98 ≥0.95 ≥2 ≥0 5 0.5 V V Conditions Typical Maximum Units 12, 15, 24V 27, 36, 48V Full load 0-100% load ±2 ±1 ±0.5 ±1 115VAC, 25°C 230VAC, 25°C High Low Output voltage 12 16 ≥2 ≥0 5 40 80 Output Specifications Parameters Voltage accuracy Line regulation Load regulation Ripple & Noise* Hold up time Power good signal** Standby output F 052e R4 Rev: 06/21/A 200 www.Aimtec.com 6 0.6 % % % % mV p-p ms ms V V V 2 AMEOF450-HAMJZ AC-DC Converter Preliminary Output current, free air convection 0.6 A Output current, 25CFM 1 A Voltage accuracy ±2 % Ripple and noise 120 mV p-p * Ripple and Noise are measured at 20MHz bandwidth with a 47μF electrolytic capacitor and a 0.1μF ceramic capacitor. Please refer to the application note for specific details. ** TTL high signal will delay 10-500ms after power on the converter. TTL low signal will be sent at least 1ms before the output voltage drops to 90% of the rated output. Isolation Specification Parameters Conditions Tested I/O voltage 60 sec, leakage ≤ 5mA Tested I/PE voltage 60 sec, leakage ≤ 5mA Tested O/PE voltage 60 sec, leakage ≤ 5mA Resistance I/O, I/PE, O/PE * 500VDC MOP I/O MOP I/PE MOP O/PE * Tested under 25±5°C ambient temperature with relative humidity 100 Units VAC VAC VAC MΩ 2xMOPP 1xMOPP 1xMOPP General Specifications Parameters Conditions Typical Maximum Units Protection class Over current protection Class I Auto recovery, hiccup ≥ 105 % of Iout 12Vout, shut down, disconnect the input for recovery 15.6 VDC 15Vout, shut down, disconnect the input for recovery 19.5 VDC 24Vout, shut down, disconnect the input for recovery 31.2 VDC Over voltage protection 27Vout, shut down, disconnect the input for recovery 35.1 VDC 36Vout, shut down, disconnect the input for recovery 46.8 VDC 48Vout, shut down, disconnect the input for recovery 60 VDC Short circuit protection Hiccup, Continuous, Auto recovery time < 5S Over temperature protection Auto recovery after the temperature drops below the threshold Fan power 12V/0.5A No-load power consumption Ambient temperature 25°C, 230VAC, OFF state 0.5 W Operating altitude 5000 m Operating temperature See derating graph -40 to +70 °C Storage temperature -40 to +85 °C Temperature coefficient ±0.03 %/°C Cooling Free air convection, forced air convection 25CFM Non-condensing, storage >10 95 % RH Humidity Non-condensing, operating >20 90 % RH Case material Enclosed package Metal (5052 Aluminum, SUS304) Open frame 400 g Weight Enclosed, -F option 605 g Enclosed, -FB option 645 g Open frame 5.00 x 3.00 x 1.52 inches (127.0 x 76.2 x 38.5 mm) Dimensions (L x W x H) Enclosed, -F option 5.12 x 3.39 x 1.70 inches (130.0 x 86.0 x 43.0 mm) Enclosed, -FB option 6.30 x 3.39 x 1.70 inches (160.0 x 86.0 x 43.0 mm) MTBF > 200 000 hrs (MIL-HDBK -217F, t=+25°C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity