AMEPR60-36170AZ

Series AMEPR60-AZ up to 5A | AC-DC LED driver FEATURES: • • • • AC-DC Constant current LED Driver Input range 90-305VAC/47-440Hz High Efficiency up to 89% Operating temperature -40 to 85°C • • • • Over Temperature Protection Waterproof Case rated IP68 Power Factor Correction SCP, Over Current Protection Models Single output Model AMEPR60-50120AZ AMEPR60-36170AZ AMEPR60-24250AZ AMEPR60-12500AZ Max Output Power (W) * 60 59.8 60 60 Output Voltage Range (V) 36-50 24-36 12-24 5-12 Output Current (A) 1.2 1.66 2.5 5 Input Voltage (VAC/Hz) 90-305/47-440 90-305/47-440 90-305/47-440 90-305/47-440 Input Voltage (VDC) 120-430 120-430 120-430 120-430 Efficiency (%) 89 88 87 85 *Exceeding the maximum output power will permanently damage the converter NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity105°C -40 to +85 Maximum Units KHz With derating over 55°C 100 -40 to +95 ±0.02 Free air convection 95 Plastic Epoxy (IP67 rated) UL1015 18AWG *20CM 350 5.30 x 2.27 x 1.59 inches 134.80 x 57.68 x 40.50 mm >400,000 hrs (MIL-HDBK-217F at +25°C) C C o C % / oC o o % RH g Safety Specifications Parameters Agency approvals Standards cULus CE UL8750, UL60950-1, EN55022, class B, EN60529(IP68), EN61347-1, EN61347-2-13 Dimensions End View Top View 134.80 (5.30) 40.50 (1.59) 16.75 (0.66) 57.68 (2.27) 32.00 60.00 (1.26) (2.36) Side View 40.50 (1.59) 200.00 (8.00) 200.00 (8.00) Input/Output Wires are 18 AWG 20cm 2.30 (0.09) 161.30 (6.35) www.aimtec.com F 052.1e R3.J Tel: +1 514 620 2722 2 of 11 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEPR60-AZ up to 5A | AC-DC LED driver Application Circuit Model Number AMEPR60-50120AZ AMEPR60-36170AZ AMEPR60-24250AZ AMEPR60-12500AZ Maximum Pot Value (kΩ) 26.00 16.95 26.10 34.10 Temperature graph Free Air Convection 55 º C 100 80 60 40 20 0 - 40 -20 0 20 40 60 80 Ambient Temperature º C 85 Safe Operating Area 100 www.aimtec.com F 052.1e R3.J Tel: +1 514 620 2722 3 of 11 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEPR60-AZ up to 5A | AC-DC LED driver Efficiency Vs. Input Voltage & Output Current (Constant current load) AMEPR60-50120AZ AMEPR60-36170AZ www.aimtec.com F 052.1e R3.J Tel: +1 514 620 2722 4 of 11 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEPR60-AZ up to 5A | AC-DC LED driver Efficiency Vs. Input Voltage & Output Current (Constant current load) Continued AMEPR60-24250AZ AMEPR60-12500AZ www.aimtec.com F 052.1e R3.J Tel: +1 514 620 2722 5 of 11 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEPR60-AZ up to 5A | AC-DC LED driver PFC Value vs. Output Load Current (constant current mode) AMEPR60-50120AZ AMEPR60-36170AZ www.aimtec.com F 052.1e R3.J Tel: +1 514 620 2722 6 of 11 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEPR60-AZ up to 5A | AC-DC LED driver PFC Value vs. Output Load Current (constant current mode) Continued AMEPR60-24250AZ AMEPR60-12500AZ www.aimtec.com F 052.1e R3.J Tel: +1 514 620 2722 7 of 11 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEPR60-AZ up to 5A | AC-DC LED driver Constant Current vs. Constant Voltage Mode AMEPR60-50120AZ AMEPR60-36170AZ www.aimtec.com F 052.1e R3.J Tel: +1 514 620 2722 8 of 11 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEPR60-AZ up to 5A | AC-DC LED driver Constant Current vs. Constant Voltage Mode Continued AMEPR60-24250AZ AMEPR60-12500AZ www.aimtec.com F 052.1e R3.J Tel: +1 514 620 2722 9 of 11 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEPR60-AZ up to 5A | AC-DC LED driver Dimming Control (Output Current vs. Radj) AMEPR60-50120AZ AMEPR60-36170AZ www.aimtec.com F 052.1e R3.J Tel: +1 514 620 2722 10 of 11 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEPR60-AZ up to 5A | AC-DC LED driver Constant Current vs. Constant Voltage Mode Continued AMEPR60-24250AZ AMEPR60-12500AZ NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity