AMER120C-70170Z-PD

Series AMER120C-Z up to 1700mA | AC-DC LED driver FEATURES: • • • • • Models Single output Model AMER120C-70170Z AMER120C-70170Z-P AMER120C-70170Z-PD AMER120C-60200Z Accurate Constant Current Output ±3% High Efficiency: Up to 91% Active Power Factor Correction UVLO, Short Circuit, Over Voltage Adjustable output current: 50-100% • • • • • IP65/IP67 design for indoor/outdoor Over Temperature Protection Dimmable output current: 10-100% Open circuit protection 5 Year Warranty Max Output Power (W) Input Voltage (VAC/Hz) Output Voltage Range (V) Output Current (A) Efficiency (%) 119 119 119 120 90-305/47-63 90-305/47-63 90-305/47-63 90-305/47-63 35-70 35-70 35-70 42-60 1.7 1.7 1.7 2 91 90.5 90 90 Model Nomenclature functional differences: With Suffix “-PD” With Suffix “-P” Without Suffix With manually adjustable 50-100% & fully dimmable 10-100% (0-10V/10PWM/Resistive) output current Only with manually adjustable output current: 50-100% Only with fully dimmable 10-100% (0-10V/10PWM/Resistive) output current NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity 400,000 hrs (MIL-HDBK-217F at +25°C) g Safety Specifications Parameters Standards Electromagnetic Interference Harmonic Current Emissions Voltage fluctuations and flicker Electrostatic Discharge Immunity RF, Electromagnetic Field Immunity Electrical Fast Transient / Burst Immunity Surge Immunity RF, Conducted Disturbance Immunity Power frequency Magnetic Field Immunity Voltage dips, Short Interruptions Immunity Electromagnetic Immunity Requirements Applies to Lighting Equipment Pin Definition Wire Pin Blue Brown Yellow/Green Red LED+ Black LEDRed Black AC-N AC-L FG +V Output -V Output DIM+ DIM- Input wire gauge #18 Output wire gauge #14 EN55015 / FCC Part 15, Class B EN61000-3-2, Class B EN61000-3-3 EN61000-4-2, 8kV Air, 4kV Contact, Level 3, Criteria A EN61000-4-3, Test-RS Level 3, Criteria A EN61000-4-4, Burst EFT Level 3, Criteria A EN61000-4-5, Line to Neutral 4kV, Line/Neutral to FG 6kV EN61000-4-6. Test-CS Level 3, Criteria A EN61000-4-8, Test 3A/m, Criteria A EN61000-4-11, Criteria B EN61547 Block diagram AC-L LED+ 1st LED AC LEDAC-N DIM+ R AC-N www.aimtec.com F 052.1e R3 LED LED Tel: +1 514 620 2722 2 of 6 DIM+ 10V 0-10V Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMER120C-Z up to 1700mA | AC-DC LED driver Dimensions Top View 320.0±20.0 12.60±0.79 7.4 5.0±1.0 30.3 0.29 0.20±0.04 4.0 1.19 0.16 35.0±2.0 1.38±0.08 163.0±1.5 6.42±0.06 320.0±20.0 12.60±0.79 159.0±1.0 6.26±0.04 30.0±2.0 1.18±0.08 10.0±1.0 0.39±0.04 68.7±1.0 2.70±0.04 7.4 0.29 4.0 0.16 4.0 0.16 12.7 0.50 150.0±0.5 5.91±0.02 175.4±1.0 6.91±0.04 12.7 0.50 Side View Yellow/Green 42.0±1.0 1.65±0.0 4 Blue Brown 150.0±0.5 5.91±0.02 175.4±1.0 6.91±0.04 Derating Graph Free Air Convection Safe Operating Area www.aimtec.com F 052.1e R3 Tel: +1 514 620 2722 3 of 6 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMER120C-Z up to 1700mA | AC-DC LED driver Case Temperature (TC ) vs. Life Time Case temperature vs Life time Lilfe time(Khours) 180 135 90 45 0 40 50 60 70 Case temperature (℃) 80 90 Efficiency Vs. Input Voltage & Output Voltage (Constant current mode) www.aimtec.com F 052.1e R3 Tel: +1 514 620 2722 4 of 6 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMER120C-Z up to 1700mA | AC-DC LED driver PF vs. Input Voltage & Output Voltage (constant current mode) Output Current vs. Output Voltage www.aimtec.com F 052.1e R3 Tel: +1 514 620 2722 5 of 6 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMER120C-Z up to 1700mA | AC-DC LED driver Output Current vs. Resistive / 0-10V Dimming Output Current vs.10V PWM Dimming Percentage of rated output current Output Current vs. 10V PWM Duty Cycle 115/230/277 VAC 120.00% 110.00% 100.00% 90.00% 80.00% 70.00% 60.00% 50.00% 40.00% 30.00% 20.00% 10.00% 0.00% 0 10 20 30 40 50 60 70 10V PWM Duty Cycle (%) 80 90 100 NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity