AMES200-24SNZ

AMES200-NZ AC-DC Converter Preliminary Click to ORDER AMES200-NZ samples The AMES200-NZ is an AC/DC converter that offers much greater cost effectiveness due to material normalization and production automation also leading to improved reliability and performance. Offering a commercial input voltage range of 90-264VAC and an output voltage range from 5-48V, this series will offer many benefits to your new system design. This new series offers great operating temperatures, from -30°C to 70°C and also features an isolation of 3000VAC for improved reliability and system safety. Furthermore, a high MTBF of 300,000h, output short circuit protection (OSCP), output over-current protection (OCP), output over-voltage protection (OVP) and overtemperature protection (OTP) come standard with the series. The AMES200-NZ is great for street lighting controls, grid power, instrumentation, industrial controls, communication, and civil applications. Enclosed Features • • • • • • • • • Summary Universal Input: 90 - 264VAC/240 - 373VDC Operating Temp: -30 °C to +70 °C High isolation voltage: Up to 3000VAC Low ripple & noise, 200mV(p-p) typ. Output short circuit, over-current, over-voltage and over temperature protection Regulated Output Optional conformal coating Surge immunity: 300VAC for 5s AMES200-NZ 528 48 4000 250 212.4 3000 300 264 125 125 150 70 90 0 40 1000 5 3.3 1 -30 Input voltage Output voltage (VAC) (V) Isolation (VAC) Power (W) -40 -30 -40 Temp. range (℃) Derating (℃) Applications Training Press Release Coming Soon! Power Grid Product Training Video (click to open) F 052e R4 Rev: 12/21/A Industrial Telecom Instrumentation Application Notes www.Aimtec.com 1 AMES200-NZ AC-DC Converter Preliminary Models & Specifications Single Output Model Input Voltage (VAC/VAC/Hz)* Input Output Output Voltage Max Output Voltage Voltage Adjustable Wattage (W) (VDC)** (V) Range (V) Output Current (A) Maximum capacitive load (µF) Efficiency @230VAC (%) AMES200-5SNZ 90-132/ 180-264/ 47-63 240-373 150/200*** 5 4.5 - 5.5 30 10000 87 AMES200-12SNZ 90-132/ 180-264/ 47-63 240-373 204 12 10.2 - 13.8 17 4000 87.5 AMES200-15SNZ 90-132/ 180-264/ 47-63 240-373 210 15 13.5 - 18 14 3300 88 AMES200-24SNZ 90-132/ 180-264/ 47-63 240-373 211.2 24 21.6 - 28.8 8.8 1500 88.5 AMES200-36SNZ 90-132/ 180-264/ 47-63 240-373 212.4 36 32.4 - 39.6 5.9 1500 89 AMES200-48SNZ 90-132/ 180-264 /47-63 240-373 211.2 48 43.2 - 52.8 4.4 470 89.5 * Switch the voltage level switch to 115 for 90-132VAC input voltage and 230 for 180-264VAC input voltage. ** Switch the voltage level switch to 230 for 240-373VDC input voltage. *** AMES200-5SNZ can output 200W for 60 sec and 150W continuously. Add suffix “-P” for optional terminal protective cover (ex. AMES200-5SNZ-P is terminal with protective cover version) or suffix “-Q” for optional conformal coating (ex. AMES200-5SNZ-Q is conformal coating version). Input Specifications Parameters Input current Inrush current Conditions Typical Maximum Units 115VAC 230VAC 115VAC, 230VAC, Cold start 60 5 3 80 A A A Conditions Typical Maximum Units Output Specifications Parameters Full load, 5V output ±3 % Full load, 12V output ±1.5 % Full load, 12V,24V,36V,48V output ±1 % Line regulation Full load ±0.5 % 0-100% load, 5V output ±2 % Load regulation 0-100% load, 12V output ±1 % 0-100% load, 12V,24V,36V,48V output ±0.5 % 5V,12V,15V,24V, output 150 mV p-p Ripple & Noise* 36V,48V output 200 mV p-p 115VAC ≥ 12 ms Hold up time 230VAC ≥ 16 ms * Ripple and Noise are measured at 20MHz bandwidth with a 47μF electrolytic capacitor and a 0.1μF ceramic capacitor. Please refer to the application note for specific details. Voltage accuracy Isolation Specifications Parameters Tested I/O voltage Tested Input to GND voltage Tested Output to GND voltage Resistance (I/O, I/O to GND) F 052e R4 Rev: 12/21/A Conditions 60 sec, leakage current < 5mA 60 sec, leakage current < 5mA 60 sec, leakage current < 5mA 500VDC www.Aimtec.com Typical Rated Units 3000 2000 500 100 VAC VAC VAC MΩ 2 AMES200-NZ AC-DC Converter Preliminary General Specifications Parameters Conditions Safety class Switching Frequency Over Current protection Typical Maximum Units Class I 65 KHz Auto recovery ≥ 110 185 % of Iout Output voltage turn off, Manual recovery, 5V output 8 VDC Output voltage turn off, Manual recovery, 12V output 18 VDC Output voltage turn off, Manual recovery, 15V output 22 VDC Over voltage protection Output voltage turn off, Manual recovery, 24V output 33.6 VDC Output voltage turn off, Manual recovery, 36V output 46.8 VDC Output voltage turn off, Manual recovery, 48V output 60 VDC Over temperature protection Output voltage turn off, Manual recovery Short circuit protection Hiccup, Continuous, Auto recovery, Recover time < 5 sec Operating temperature See derating graph -30 to +70 °C Storage temperature -40 to +85 °C No-load power consumption 0.75 W 40 °C to 70 °C, 5V output 1.66 % / °C 50 °C to 70 °C, Others 2.5 % / °C Power derating 90VAC ~ 100VAC, 60Hz 2 % / VAC 90VAC ~ 100VAC, 50Hz 3.5 % / VAC Ambient temperature derating Operating altitude > 2000m 5 °C / 1000m Temperature coefficient ±0.03 % / °C Cooling Free air convection Non-condensing, Storage ≥ 10 95 % RH Humidity Non-condensing, Operating ≥ 20 90 % RH Case material Metal (1100 Aluminum, SGCC) Weight 520 g Dimensions (L x W x H) 7.05 x 3.90 x 1.18inch (179.0 x 99.0 x 30.0mm) MTBF > 300 000 hrs (MIL-HDBK -217F, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity