AMPL-UZ10A

Series AMPL-UZ 10A Up to 50 Watt | DC-DC Converter FEATURES: • • • • POL delivering 10A output current Programmable output voltage Remote output sense Remote On/Off Control Function • • • • Output Over current protection Over temperature protection Operating temperature -40 to 85ºC Industry standard SMD footprint Models Single output Model AMPL-0510-UZ AMPL-1210-UZ Nom. Input Voltage (V) 5 12 Output Voltage (V) 0.75, 1, 1.2, 1.5, 1.8, 2, 2.5, 3.3 0.75, 1, 1.2, 1.5, 1.8, 2, 2.5, 3.3, 5 Output Current max (A) 10 10 Efficiency (%) 97 96 Input Specifications Parameters Voltage range Nominal 5 12 Typical 3~5.5 10~14 Maximum Units V Output Specifications Parameters Set point Voltage accuracy Trim range Remote sense compensation Short Circuit protection Short Circuit restart Line voltage regulation Load voltage regulation Turn-on delay time Rise time Temperature coefficient Ripple & Noise Load transient voltage Setting time Maximum capacitive load Conditions Full Resistive load R10mΩ Typical ±2 0.75~3.63 0.5 Maximum Units % V V Continuous Auto recovery ±0.5 ±0.5 2 1.5 ±0.02 50 160 50 5000 % of Vin % ms ms %/oC m Vp-p mV μs μF General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 300 KHz o Operating temperature -40 to +85 C o Storage temperature -55 to +125 C Cooling Free air convection Humidity 10 ~ 90 % Weight 7 g Dimensions (L x W x H) 1.30 x 0.53 x 0.27 inches 33.00 x 13.46 x 6.70mm MTBF > 5,000,000hrs, Bellcore TR332, 25 oC NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity