AMSR-78-NZ_1

Series AMSR-78-NZ Up to 7.5Watt | DC-DC Converter FEATURES: • • • • RoHS Compliant 3 Pin SIP Package Non-Isolated Low ripple and noise • • • • Operating temperature -40°C to +85°C Very high efficiency up to 96% Pin compatible to multiple manufacturers Regulated Outputs Models Single output Model AMSR-783.3-NZ AMSR-7805-NZ AMSR-786.5-NZ AMSR-7809-NZ AMSR-7812-NZ AMSR-7815-NZ Input Voltage (V) 4.75-28 6.5-32 8-32 11-32 15-32 18-32 Output Voltage (V) 3.3 5 6.5 9 12 15 Output Current max (mA) 500 500 500 500 500 500 Efficiency Vin Max (%) 90 93 94 95 95 96 Efficiency Vin Min (%) 80 84 87 91 92 93 Input Specifications Parameters Voltage range Filter Quiescent current Short circuit consumption Conditions Vin=(LL-HL) at 0% load Typical See the table above Capacitor Maximum 7 0.8 Units VDC mA W Output Specifications Parameters Voltage accuracy Short Circuit protection Short circuit restart Output current limit Thermal shutdown Dynamic load stability Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise Maximum capacitive load Conditions 100% load Typical ±3 Continuous Auto recovery Maximum Units % 2 Internal IC junction 10-100% load Vin=(LL-HL) at full load 10-100% load -40°C to +85°C ambient 20MHz Bandwidth 150 ±100 ±0.4 ±0.6 ±0.02 35 1000 A C mV % % %/oC mV p-p uF o General Specifications Parameters Conditions Typical Maximum Units Switching frequency 100% load 330 KHz o Operating temperature With derating above 71 oC -40 to +85 C o Storage temperature -55 to +125 C o Max Case temperature 100 C Cooling Free air convection Humidity 95 % Case material Non-conductive black plastic (UL94V-0 rated) Weight 2 g Dimensions (L x W x H) 0.45 x 0.30 x 0.40 inches 11.50 x 7.60 x 10.20 mm MTBF > 2 000 000 hrs (MIL-HDBK-217F, Ground Benign, t=+25 oC) o Soldering Temperature 1.5 mm from case for 10 sec 300 C NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity