AMSR2-7805JZ

AMSR2-78JZ DC-DC Switching Regulator Click to ORDER AMSR2-78JZ samples Aimtec introduces the new AMSR2-78JZ, a 2A Switching Regulator which is designed to be a plug and play alternative to the traditional 78xx series three-terminal linear regulators. The series features an ultra-wide input voltage range of 6-36V, 0.1mA ultralow no load input current, continuous short-circuit protection, low ripple noise (typ.: 30mV) and much more. The new 2A series has operating temperature from -40°C to +85°C, meets EN62368 standard (Pending) and has delivers efficiencies up to 95%, eliminating the need for a heat sink and cutting additional design space and installation cost. This series is suitable for use in applications such as industrial controls, medical, mining, railway and other related industries. SIP3 Features • • • • • • Summary AMSR2-78JZ Input Voltage up to 36V Operating Temp: -40 °C to +85 °C Ultra-low no load input current: 0.1mA typ. Low ripple & noise, 30mV typ. Continuous Short Circuit Protection Design to meet EN62368 2 95 87 72 85 71 85 36 17.5 55 85 8 -0.3 Efficiency Output Current 7.25 4.5 -40 -40 Temp. range Input Voltage Derating (°C) Case Height (°C) (VDC) (mm) Applications Training Press Release Coming Soon! Product Training Video (click to open) F 052e R1 REV: 02/22/A Application Notes www.Aimtec.com 1 AMSR2-78JZ DC-DC Switching Regulator Models & Specifications Single Output Model Input Voltage (VDC) Output Voltage (VDC) Output Current max (mA) Maximum capacitive Load (µF) Efficiency Vin Max. @full load (%) Efficiency Vin Min. @full load (%) 24 (4.5 - 36) 24 (6 - 36) 24 (8 - 36) 24 (13 - 36) 24 (16 - 36) 24 (19 - 36) 2.5 3.3 5 9 12 15 2000 2000 2000 2000 2000 2000 2000 1800 1000 680 470 470 83 83 87 90 92 93 89 87 90 93 94 95 AMSR2-782.5JZ AMSR2-783.3JZ AMSR2-7805JZ AMSR2-7809JZ AMSR2-7812JZ AMSR2-7815JZ AMSR2-783.3LJZ 24 (6 - 36) 3.3 2000 1800 83 87 AMSR2-7805LJZ 24 (8 - 36) 5 2000 1000 87 90 AMSR2-7812LJZ 24 (16 - 36) 12 2000 470 92 94 Add a 22µF/50V electrolytic capacitor at the input end when the input voltage is over 30V to prevent the device from being damaged by the voltage spike. Input Specification Parameters Voltage range Filter Quiescent Current Reverse Polarity Input Conditions Typical See Models table above Capacitor Positive output, Others 0.1 Positive output, 5V/12V/15V output 1.5 Prohibited Maximum Units 1 4 mA mA Maximum Units ±4 ±3 ±0.8 ±1.5 % ±0.03 75 120 1 150 %/ °C mV pk-pk mV pk-pk ms mV Output Specification Parameters Voltage accuracy Line regulation Load regulation Short circuit protection Temperature coefficient Ripple & Noise Transient recovery time Dynamic load stability F 052e R1 REV: 02/22/A Conditions At 100% load, 3.3V output At 100% load, Others Full load, main input range 0-100% load Typical ±2 ±2 ±0.4 ±0.5 Continuous, Auto recovery 20MHz bandwidth, 100% load, Others 20MHz bandwidth, 100% load, 5V/12V/15V output 25% load step change 25% load step change www.Aimtec.com 30 80 0.2 50 % % 2 AMSR2-78JZ DC-DC Switching Regulator General Specifications (Continued) Parameters Switching frequency Conditions Typical 100% load, Others 100% load, 5V output 100% load, 12V output 100% load, 15V output See derating graph 400 200 270 300 -40 to +85 -55 to +125 Maximum Units KHz KHz KHz KHz °C °C °C Operating temperature Storage temperature Lead temperature 1.5mm from case 10 sec. 260 Cooling Free air convection Humidity Non-condensing 95 % RH Case material Black flame-retardant and heat-resistant plastic (UL94 V-0) Weight 3.8 g Dimensions (L x W x H) 0.45 x 0.35 x 0.69 inches, 11.50 x 9.00 x 17.50mm MTBF > 2000 000 hrs (MIL-HDBK -217F, t=+25°C)/Full Load All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity