AMSRB-786.5-NZ

Series AMSRB-78-NZ Up to 7.5Watt | DC-DC Converter FEATURES: • No heatsink required • 3 Pin SIP package • Non-isolated • Low ripple and noise • RoHS compliant • • • • Operating temperature -40°C to +85°C Very high efficiency up to 96% Pin compatible to multiple manufacturers Regulated outputs Models Single output Model AMSRB-783.3-NZ AMSRB-7805-NZ AMSRB-786.5-NZ AMSRB-7809-NZ AMSRB-7812-NZ AMSRB-7815-NZ 4.5 ~ 30 6.5 ~ 30 8 ~ 30 11 ~ 30 15 ~ 30 18 ~ 30 Input Voltage (V) Output Voltage (V) 3.3 5 6.5 9 12 15 Output Current max (mA) 500 500 500 500 500 500 Efficiency Vin Max (%) 77 81 85 89 92 93 Efficiency Vin Min (%) 90 94 95 95 96 96 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity 2 000 000 hrs (MIL-HDBK-217F, Ground Benign, t=+25 oC) 1.5 mm from case for 10 sec 300 C www.aimtec.com F 051e R12.C Tel: +1 514 620 2722 1 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMSRB-78-NZ Up to 7.5Watt | DC-DC Converter Pin Out Specifications Pin 1 2 3 Dimensions +V Input -V Output Ground 11.50 (0.45) PRINTED FACE Positive Output Negative Output +V Input Ground +V Output 7.55 (0.30) 9.70 (0.38) Standard Application Circuit +V input C1 4.00 (0.16) 1 AMSRB-78Z 2 3 C2 +V output 0.50 (0.02) 2.54 (0.1) 0.50 (0.02) 7.55 (0.30) Ground Ground 0.50 (0.02) Dimensions are in mm (inch) Pin Tolerance: ±0.16 mm(0.004 inch) Case Tolerance : ±0. 25 mm(0. 01 inch) External Capacitor values Model Number AMSRB-783.3-NZ AMSRB-7805-NZ AMSRB-786.5-NZ AMSRB-7809-NZ AMSRB-7812-NZ AMSRB-7815-NZ C1 (ceramic capacitor) 10uF/50V 10uF/50V 10uF/50V 10uF/50V 10uF/50V 10uF/50V C2 (ceramic capacitor) 22uF/16V 22uF/16V 10uF/16V 10uF/16V 10uF/25V 10uF/25V Ripple and Noise Reduction +V input C1 1 AMSRB-78Z 2 Ground Ground 3 C2 +V output 22uF L Recommended value of inductor L is between 10uH to 47uH www.aimtec.com F 051e R12.C Tel: +1 514 620 2722 2 of 3 1.80 (0.70) 0.30 (0.01) Toll free: + 1 888 9 AIMTEC (924 6832) North America only 10.20 (0.40) Series AMSRB-78-NZ Up to 7.5Watt | DC-DC Converter Derating Recommended Circuits Conducted and Radiated Emissions NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity